SA-12 D2 REV.3- Sundown Audio 12" 750W Dual 2-Ohm SA Series Subwoofer
SA-12 D2 REV.3 SUNDOWN AUDIO 12" DVC 2 OHM SA 750W RMS SUBWOOFER CAR BASS SPEAKER Specifications: DC Resistance (Re): 4.57 Resonance Frequency (Fs): 33.71 Hz Equivalent Volume (Vas): 21.21 L Electrical Q Factor (Qes): 0.58 Mechanical Q Factor (Qms): 5.34 Total Q Factor (Qts): 0.52 Voice Coil Inductance (Le): 3.40 mH Force Factor (BL): 21.64 NA Moving Mass (incl. Air Load) (Mms): 280 g Suspension Compliance (Cms): 79.43 m/N Sensitivity: 83.21 dB 1w / 1m Box Recommendations: Sealed Enclosure Suggestion: 1.0 cu. ft. Ported Enclosure Suggestion: 1.5 - 2.0 cu. ft. @ 35 Hz Displacement: 0.14 cu. ft. Depth: 6.5 in Outside Diameter: 12.625 in Cutout: 11.125 in
- 19.0mm X-Max by 70 BL method one-way (38.0mm peak to peak)
- Thick black anodized aluminum voice coil formers for maximum strength and heat dissipation
- High efficiency air-flow management integrated into the motor for maximum voice coil cooling
- Dual Aluminum Faraday rings for reduced inductance and inductive distortion (pole cap and magnet ID)
- Two-Year Warranty against defects in materials and workmanship
X-15 V.2 D4 - Sundown Audio 15" Dual 4-Ohm X V.2 Revision 2 Series Subwoofer
- X-15 V.2 D4 - Sundown Audio 15" Dual 4-Ohm X V.2 Revision 2 Series Subwoofer
- Specifications: DC Resistance (Re): 6.1 Resonance Frequency (Fs): 29.5 Hz Equivalent Volume (Vas): 59.5 L Electrical Q Factor (Qes): 0.50 Mechanical Q Factor (Qms): 4.92 Total Q Factor (Qts): 0.45 Voice Coil Inductance (Le): 3.61 mH Force Factor (BL): 28.8 NA Moving Mass (incl. Air Load) (Mms): 365.3 g Suspension Compliance (Cms): 0.08 mm/N Sensitivity: 86.7 dB 1w / 1m
- Box Recommendations: Sealed Enclosure Suggestion: Not Recommended Ported Enclosure Suggestion: 4.25 cu. ft. Displacement: 0.22 cu. ft. Depth: 10.85 in Outside Diameter: 15.51 in Cutout: 13.83 in Recommended Tuning: 32 Hz Recommended Port Area: 68 sq. in.
JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier
JL Audio JX1000/1D 1000 Watt RMS Monoblock Class D Car Amplifier OPEN BOX
- JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohms
- Unregulated PWM switching type power supply
- Variable Bass Boost (0 to 12 dB bass boost centered at 45 Hz)
- Soft start turn-on prevent clicking and popping when system turns on
- Dimensions: 11"L x 7-3/4"W x 2"H
Skar Audio RP-2000.1D Monoblock 2000-Watt Class D MOSFET Subwoofer Amplifier
Skar Audio engineered the RP-2000.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-2000.1D.
The RP-2000.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 2,000 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 2,800 watts at max power output. This amplifier is by far one of the most popular and affordable mono-blocks we have ever released, and is great for powering a pair of 1,000 watt rms subwoofers or one larger and more powerful 2,000 watt rms subwoofer.
Furthermore, the oversized 1/0-gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, 6, 12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
In addition to all the above features, this model also features 4-way protection circuitry, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, overheating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 2,800 Watts, RMS Power at 1 Ohm: 2,000 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with 6 or 12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 1/0 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm, Remote Subwoofer Level Control Included
ASC Single 8" Subwoofer Universal Slot Vented Port Sub Box Speaker Enclosure
What happens when you combine years of product design with ultimate material quality? The perfect sub box! Our single 8" transmission series enclosure ideal for mid to high end subwoofers and features a patent pending vent design that simply cannot be found elsewhere. So what is so special about the port? If you were to cut open the enclosure you would notice a snake like shape that channels the airflow from the interior of the box outward. The purpose of this is to tune the frequency of the enclosure and also increases the back pressure to create the absolute maximum bass output! This baby is made from 3/4" MDF wood all around so you know it is one tough hard hitting bass machine! Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your vehicle to the get the max performance from every extra inch of wasted space. We guarantee you will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.
- Dimensions: Width 12-1/2" x Height 10-1/2" x Depth 16-1/2"
- Mounting Depth: 11-1/4 Inches
- Air Space: 0.80 Cubic Feet
Atrend 12LSV Single 12" Vented Carpeted Subwoofer Enclosure
Atrend 12LSV 12-Inch Single Vented Subwoofer Enclosure
(W) 30.00" x (H) 14.75" x (D) 14.75" - Vent (W) 2.75" x (H) 13.25" x (Deep) 16.50"
Gross Cu. Ft. 2.90 Net Cu. Ft.2.40 (Tuning 43Hz) Speaker hole cutout 11.12"
Speaker face is .75" Body is .75"
Slot Vent with Spring loaded extra large terminal cups
Wire will be needed to run from the speaker to the terminal cup tabs
IMPORTANT:Confirm the required speaker hole cutout is no more than 11.12".
- Cutout Diameter - 11.125"
- Max Mounting Depth - 10"
- Net Volume - 2.51"
- (Height) 14.875" x (Width) 30.125" x (Depth) 15"
- Premium Charcoal Carpet
- 12-inch Single Vented SPL Enclosure
- Shared Chambers
- MDF Construction
- Completely Carpeted Enclosure
- 0.75-inch Speaker Baffles
Rockford Fosgate P3-2X12 Punch Dual P3 12" Loaded Enclosure Ported Subwoofer
Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!
- Constructed with 5/8" MDF, Power Handling: 1200 Watts RMS - 2400 Watts Max
- High current binding posts
- Proprietary high-flow, low noise port, Woofer Size: 12"
- Nominal Impedance (ea): 1-Ohm Internally wired to create a 1-Ohm amplifier load
- Speaker Connector: Up to 10 AWG compression terminals
Hifonics ZRX1816.1D Zeus Mono Class-D Subwoofer Amplifier, 1800-Watt
hifonics car amp
- Illuminated Hifonics Badge
- SPC - Simpatico Coil Design, HSMD - Hifonics Surface Mount Design
- PWM MOSFET Power Supply for Maximum Current Levels
- DC, Short Circuit, Thermal and Overload Protection
- A classic Hifonics aluminum heatsink with a Zeus 1800 Watt, 1 ohm stable, Class D mono subwoofer car audio amplifier.
JL Audio CP212-W0V3 Dual 12" 12W0v3 Ported Subwoofer Enclosure Box
These potent slot-ported MDF-enclosed subwoofer systems fit a wide variety of vehicles and feature JL Audio's new 12" W0v3 subwoofer drivers. Designed for forward, read or down-firing installation. Loaded, wired, ready to install. Finished in dark gray carpet, five-way binding post connectors. Embroidered JL Audio logo above woofer(s), embroidered "Slot-Ported BassWedge" logo on port mouth. 2 ohm final impedance
- CP212-W0V3 - JL Audio 12" 12W0V3-4 Loaded Ported Enclosure with Gray Carpet Finish
- Power Handling: Peak: 600 watts RMS: 300 watts
- Mineral-filled, polypropylene cone woofer for excellent durability
- Large roll surround for generous amounts of excursion
- Enclosure Dimensions: 15-3/4"TD x 20-5/16"BD x 31-3/8"W x 15-3/16"H
Hifonics ZRX2416.1D Zeus Mono Class-D Subwoofer Amplifier, 2400-Watt
Includes remote level control. Signal-to-Noise Ratio > 95 dB. Total Harmonic Distortion < 0.1 . 2,400 watts max. 650 watts RMS x 1 @ 4ohm. Illuminated Hifonics badge. Old-school Hifonics heat sink. Military-grade PCB. SPC (Simpatico Coil Design). HSMD (Hifonics Surface-Mount Design). PWM MOSFET power supply. Diagnostic indicators. DC, short circuit, thermal and overload protection. Low-level RCA inputs and outputs. 17.3 in. W x 10 in. D x 2.4 in. H.
- 2400 watt mono block D class amplifier
- 1 x 800 @ 4 Ohms, 1 x 1600 @ 2 Ohms, 1 x 3200 watts @ 1 Ohm
- Old school Hedonics heat sink for superior heat dissipation
- Military grade PCB
- PWM MOSFET power supply for maximum current levels
- Camelbak for women
- Hydrating shampoos
- Removing a screw with stripped head
- Impact driver for the money
- Gas lawn mower under 200
- Impact wrench for automotive
- Things to do on the big island