Sound Storm LOPRO10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space
Give your vehicle's audio system an upgrade with the SSL LoPro10 Class A/B 10"" Low Profile Amplified Subwoofer. This powerful Amplified Subwoofer features 1200 Watts Max Power with a MOSFET power supply to take your music to the next level. With High and Low Level Inputs it can be hooked up to just about any in-dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control and Remote Subwoofer Control. Gear up and get your music thumping with the Sound Storm LoPro10.
For further product details, please scroll down.
- BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it; RMS Power Handling: 600 Watts
- DIMENSIONS: 15.2 inches in Depth, 11.2 inches in Width and 2.8 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
- WARRANTY: BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
Rockford Fosgate R150X2 Prime 2-Channel Amplifier
The PRIME R150X2 is a 2-channel amplifier that can pump-out 75 Watts into both channels at 2-Ohms, making it perfect for full-range or component speakers. The R150X2 can also run in bridged/mono mode for use with subwoofers.
- 50 Watts x 2 @ 4-Ohm / 75 Watts x 2 @ 2-Ohm / 150 Watts x 1 @ 4-Ohm Bridged
- Accepts High Level & RCA Level Input
- Cast aluminum heatsink with Top Mount Controls
- 12dB/octave crossover
- 4 Gauge power/ground connectors
Skar Audio RP-800.1D Monoblock 800 Watt Class D MOSFET Subwoofer Amplifier
Skar Audio engineered the RP-800.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-800.1D.
The RP-800.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 800 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 1,200 watts at max power output. This amplifier is by far one of the most popular and affordable mono-blocks we have ever released, and is great for powering a "daily driver" subwoofer stage in any vehicle.
Furthermore, the oversized 4-gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, 6, 12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
In addition to all the above features, this model also features 4-way protection circuitry, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, over heating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.
- MOSFET Monoblock Power Amplifier
- Max Power at 1 Ohm: 1,200 Watts
- RMS Power at 1 Ohm: 800 Watts
- Class D Circuitry, Stable at 1 ohm
- Remote Subwoofer Level Control Included
Rock-N-Roller R2RT (Micro) 8-in-1 Folding Multi-Cart/Hand Truck/Dolly/Platform Cart/26" to 39" Telescoping Frame/350 lbs. Load Capacity, Black
- Instantly transforms into 8 different shapes, replacing 8 different cart types
- Carries huge amounts of equipment yet folds small for storage
- R-Trac tires ride smoothly with excellent traction, like pneumatic tires without the hassle of upkeep or repair
- Textured, powder coated steel is durable and also reduces slippage during transport
- Featured in college engineering textbooks for its outstanding design. Polypropylene Hub with Polyurethane Foam tires
Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier
New Rockford Fosgate Prime 750 Watt Class D 1 channel Amplifier
- Tri-stage protection covers thermal, over-current and short circuits.
- On-board PEQ (Punch Equalization) with 18 dB of boost at 45Hz
- Variable crossover 12dB/octave slopes
- Infrasonic filter. Low-Pass: Variable 50Hz - 500Hz at 12dB/Octave
- Optional Remote PEQ (Level control)
Amplifier Borad, Yeeco Digital Amplifier Board 2.0 Dual Channel Audio Amplifier 150W150W Output DC 12-24V Digital Amp Module Power Amplifier Board Stereo Amp Amplify DIY Circuit Module
Power supply: DC 12-24V
Supply current: >3A
Output power: 150W*2
Channel amount: 2
Size: 124mm*100mm*18mm (length * width * height)
Please note that noise will happen in these situation:
-Power supply is not sufficient or not stable;
-Using switch power supply
-Using transformer as power supply and without shield & isolation; wdo not avoid interference
-Local at the environment with electromagnetic interference
-Audio input has its own problem
-Audio driver setting
-Music Player effects setting
(1)Hardware problem-> The power supply should not be placed too close to the amplifier board in order to avoid electromagnetic interference. It is better to use high quality power supply which offers stable power. If you use power transformer, using an iron sheet to cover the transformer is highly recommended.
(2)Software problem-> When you connect the amplifier to telephone or computer, you can turn off the special effects software or sound card driver effects settings. Using the software after making sure they will not take effect on the sound effect.
1*2.0 Dual Channel Stereo Amp Board
- Yeeco Audio Amplifier Board,DC 12-24V power supply audio amplifier; great for DIY speaker; vehicle auto; home theater; music playing on the street/ square/ shopping mall sound amplify
- This Digital Power Amplifier Board,Two chips - high efficiency class-D operation; provides whole protection of short-circuit, over-heat, over-voltage, low voltage or DC malfunction
- Our Dual-Channel Stereo Audio Amplifier Subwoofer;Digital amplify chip, up to 90 efficiency, low idle loss and high heat dissipation; 1.6mm circuit board, smooth surface, heat resistant and tide resistant
- The Digital 2.0 Amp Module is with DC power supply connection port and DC 12-24V wiring terminals (please do not use in the same time); 3.5mm audio input jack; 3-pin audio input jack; Volume/ Treble/ Bass adjustment knob
- DIY Sound System Component;Several symmetrically mounted capacitances, big capacity, great filtering and energy storage function; Inductance coil has inhibition for the AC; European style wiring terminal
BTECH AMP-U25D Amplifier (Supports DMR) UHF (400-480MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola
AMP-U25D : 400 480 MHz
Power supply: 13.8 VDC (15), 5.5 A maximum
Input RF power: 2 - 6W (10)
Output RF power: 20 - 40W
Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
Net weight: 1.8 lbs. (800 g)
The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.
Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.
Transmitting without an antenna or dummy load may cause harm to the radio equipment.
When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.
If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.
- Easily extend the communication range of your handheld radio; Use the AMPU25D to create: an affordable DMR mobile radio with a vehicle mounted antenna, a high power field radio with a field deployed antenna, a home/base radio attached to a mast. Your handheld radio connects in seconds and can just as easily disconnect and be taken on the go.
- Kit Includes the necessary cables and interface connectors to easily connect to BTECH and BaoFeng Radios.
- Recommended Accessory: Pair with the BTECH UT-72 Antenna or NMO-72 Antenna & compatible mount for an easy mobile or field deployed solution.
- What's Included: Amp Body, Mobile Mounting Bracket & Screw set, Radio to Amplifier Antenna Cable (SMA Female to SMA Male), Control Cable (K1 to K1), User Manual, Speaker Microphone & Hanger
- BaoFeng Tech is the only authorized BaoFeng & BTECH Distributor to honor the Manufacturer Warranty. Only BaoFeng Tech offers warranty claims without shipping anything to China. You must insure that BaoFeng Tech is your selected buying option when buying to be able to have the full USA warranty.
Giandel 1200Watt Power Inverter 12V DC to 110V 120V AC with 20A Solar Charge Controller Remote Control Dual AC Outlets & USB Port for RV Truck Solar System
A leading inverter brand in Australia,has devoted to providing quality inverters and service for 10 years.Giandel Inverters have been well known in Australia and a Must for road trips, vacations, outdoors, emergency kits and more.
Power (2 AC Outlets): 1200W Rated, 2400W peak,give more power than 1000W inverter
USB output: 1xDC 5V/2.4A(max)
Output wave: modified sine wave
Nominal input voltage:9.8-16VDC
Nominal output voltage: 110-125VAC
Battery cables:one pair with length of 2 feet
Remote controller: remote controller with 15ft cable. More convenient to control the inverter ON/OFF
20A solar charge controller(PWM) :suitable to connect 300Watt(15-18VDC) solar panel
Battery status indicator: display the voltage of battery while charge it by solar panel
Battery select switch: set to GEL or SLA according to your battery
Built-in cooling fan only starts working when temperature is over 104
More details and tips:
connect the inverter to a 12V battery, and plug your AC devices into the inverter
Please do not leave the power inverter in the ON position while your car is off.
Disconnect the positive battery terminal before doing any wiring to the inverter
Do not put the inverter into sunlight directly, keep it in cool and dry environment
Don't use the inverter with a product that draws a higher wattage the inverter can provide,as this may cause damage to the inverter and product
1x 1200W Power Inverter
2x Battery Cables
1xRemote Controller with 15 ft Cable
- Giandel:A top inverter brand in Australia, providing high quality inverters. This 1200Watt inverter provides 100 full continuous output power and 2400Watts peak power,featuring 2 AC outlets and 1x2.4A USB port,with Remote controller and cable;give more power than 1000W inverter
- 20A Solar charge controller(PWM):Suitable to connect a 300Watts(15-18VDC) solar panel directly to charge SLA or GEL battery, with a selectable switch.With battery voltage indicator to see battery status.
- Dual AC outlets and 1x2.4A USB charging port ideal for Camping,Cars,Boats,RVs,Emergency,Powering your TV,game player,laptop, lights, power tools
- Isolated Input/Output design with Fully Safety Protections:Over voltage,Low voltage,Overload,Short circuit,Over heat,polarity reverse protection(fuse),Soft start tech,Auto-restart function
- Big and Durable aluminum alloy housing provides advanced protection from drops and bumps. Integrated cooling fan helps reduce heat and prevents shortages. 18-Month Warranty provided by GIANDEL
Rehear Hearing Amplifier Cleaning Brush with Wax Loop and Magnet (pack of 6)
Clearning your hearing aid take out the hearing aid battery remove earwax adjust trimmer slightly
- Size: length(50mm/1.9"), brush hear length(5mm/0.2")
- Multi-function cleaning tool. Brush away any wax or skin debris from the surface of hearing aids.
- Use the wax loop to gently remove wax build up from in-the-ear hearing aids.
- Magnet on brush end makes removing and inserting hearing aid batteries easier.
- NOTE: PLS KINDLY CHECK WHEN YOU PAYMENT, our brand is "Rehear" with Prime Tag.
Planet Audio AC4000.1D Anarchy 4000 Watt, 1 Ohm Stable Class D Monoblock Car Amplifier with Remote Subwoofer Control
Take control of your in-vehicle audio experience with the Planet Audio Anarchy AC4000.1D Monoblock Class D Amplifier. This powerful 1-Ohm stable Amplifier features 4000 Watts Max Power with a MOSFET power supply for full-on sound. Customize the sound with Variable Low Pass Crossover, Bass Boost, Subsonic Filter and Switchable Phase Control. Tweak the Bass with the Remote Subwoofer Control. For double the performance, strap on another AC4000.1D for a total power of 8000 Watts @2-Ohms. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Rock your music with the Planet Audio AC4000.1D.
For more product details, please scroll down.
- 4000 W MAX Power @ 1 Ohm x 1 Channel
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- Low Level Inputs, RCA Pre-amp Outputs, Switchable Phase Control
- Variable Low Pass Crossover, Variable Bass Boost, Variable Subsonic Filter
- Remote Subwoofer Control, Blue Backlit Illumination
- Dimensions: Depth 15" x Width 10" x Height 2.4"
- 6 Year Platinum Online Dealer Warranty
- Black and decker 12v drill battery
- Rest pillow
- Wireless earbuds on amazon
- Emergency bivvy
- Hunger control supplements
- Impact wrench under 100
- Museums usa