DEWALT DWC860W 4-3/8-Inch Wet/Dry Masonry Saw
DEWALT DWC860W 4-3/8-Inch Wet/Dry Handheld Tile Cutter has a powerful 10.8 amp (1,300 watts) motor that delivers the cutting power to cut through granite, porcelain, concrete and other stone materials. Compact and lightweight at only 6.6-Pound Premium 4-3/8-Inch diamond blade for cutting ceramics and stone materials up to 1-3/8-Inch deep, wet or dry. The dust sealed switch protects the unit from contamination and prolonges the life of the unit. It also has a lock-on button to reduce user fatigue durign production cuts and a rubber ermold grip tp provide increased user comfort and ergonomics. Also includes: 13" Water line and regulator, (1) 4-3/8-Inch DeWalt Diamond Blade, (2) wrenches for blade change, and instruction manual.
- Power 10.8 amp motor delivers the cutting power to cut through granite, porcelain, concrete and other stone materials
- Premium 4-3/8-inch diamond blade allows the user to cut ceramics and stone materials up to 3-centimeters deep-wet or dry
- 13-Foot water line feeds water to the blade decreasing dust and increasing blade performance and life
- Bevels to 45 Degrees for quick angled cuts
- Lock-on button reduces fatigue during production cuts
Evolution DISCCUT1 12-Inch Disc Cutter, Orange
Evolution's Electric Disc Cutter easily cuts Concrete, Stone, Brick, and Paving, even reinforced concrete, with the supplied 12" diamond blade. The powerful 15Amp / 1800W motor makes easy work of the most robust materials and because it is electric there are no harmful fumes, making it ideal for work in enclosed areas. The ergonomic support handles are ideally positioned for perfect balance when cutting and the spindle lock mechanism means blade replacement is quick and simple.
- Robust & versatile the Evolution electric disc cutter easily cuts concrete even tough reinforced concrete, stone, brick, paving and other materials.
- Safe & economical, the 15Amp (1800W) hi-torque, electric motor means no harmful fumes. Alternative to high maintenance, petrol-powered disc cutters!
- The ergonomic soft-grip, mid-position, front and rear support handles are positioned -to aid accurate cutting in both horizontal and vertical modes.
- Supplied with a 12" diamond blade, the disc cutter can achieve a large 4" max. cutting depth through progressive / incremental cutting.
- The safety guard is fully adjustable. The spindle lock mechanism allows simple blade replacement.
- Easy to use and maintenance free
- 4-Inch maximum cutting depth
- This demolition saw is sometimes used as an alternative to a plate compactor, demotion hammer, or jackhammer.
SKIL 3540-02 7-Inch Wet Tile Saw
Been putting off that kitchen or bathroom tile project? Lets get that off the to do list and complete tiling projects easily with the SKil model 3540, 7 in. Wet Tile Saw. The stainless steel top resists corrosion and the adjustable rip fence with miter gauge ensures accurate straight and miter cuts. Its 7-in included diamond blade ensures smooth cutting along with a blade cooling water reservoir that keeps the blade cool and minimizes dust and debris. Why rent one, when you can add this power tool to your collection for about the same cost? - Stainless steel table top - resistant to corrosion - Adjustable rip fence with miter gauge - for accurate straight and miter cuts - Bevel cuts tile from 0 to 45 degrees - flexibility for different cut types - Blade cooling water reservoir - keeps blade cool and minimizes dust and debris\nWe are an authorized SKiL dealer
- Corrosive resistent stainless steel top supports tiles up to 12 x 12-in.
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Blade cooling water reservoir to keep blade cool while minimizing dust and debris
- Bevel cuts tile from 0 to 45 degrees. Cut Material: Stone/Masonry
- Cross Cut Capacity: 7.75-in. Diagonal Cut Capacity: 7.25-in.
SKILSAW SPT79-00 15-Amp MEDUSAW Worm Drive Saw for Concrete, 7"
When theres concrete to conquer, MEDUSAW makes the job a whole lot easier. Its the worlds first fully integrated saw designed specifically for scoring and cutting concrete accurately. Forget modifying an old saw. This ones got our legendary SKILSAW worm drive power train, plus a unique Cut-Ready adjustable plunge lock and a pivoting pointer for unmatched precision and convenience. Used wet or dry, the dual integrated dust management system takes dust out of your way. And rust resistant brackets and fasteners resist corrosion for long life. Armed with MEDUSAW, youll power through the toughest concrete jobs. Its all part of the performance legend that is SKILSAW.
- Worm drive geared concrete saw delivers a complete cutting system
- Cut-Ready adjustable plunge lock and retractable front pointer guides saw along cut line and retracts for tight spaces
- Wet/dry dust management system Controls dust for cleaner cuts
- Gfci protection reduces risk of shock to user
- Rust resistant brackets and fasteners protects against corrosion
Alpha AWS-125 5" Stone Cutter
Wet stone cutter can easily cut through 1-5/8" material.
Built-in water feed system. Side handle for more stability
12,000 RPM. 10 AMP, Weight 7.2 lbs
Includes storage case included.
- Wet stone cutter can easily cut through 1-5/8" material
- Built-in water feed system
- Side handle for more stability
- 12,000 RPM. 10 AMP, Weight 7.2 lbs
- Includes storage case included
2.5 Horsepower 10" Industrial Tile/Brick Saw
Stand is NOT included. Amazon shows it in the chart, but please understand it is NOT included
- Stand is NOT included. Amazon shows it in the chart, but please understand it is NOT included
60020SQ 24-Inch Dual Speed Tile Saw with Water Pump and Folding Stand
This dual-speed tile saw features an enclosed dual-spray water system for evenly distributed water flow. Great for cutting all kinds of tile, including marble, granite, porcelain and other masonry products. HP: 2, Speed - No Load (RPM): 1,750/2,450, Blade Diameter (in.): 10, Cutting Thickness (in.): 3 1/4
- Powerful 2 HP motor cuts through all types of tile quickly and easily.
- Rip Cuts tile up to 24" x 24" square and diagonally cuts tile up to 14" x 14". Locking tilt-up blade guard makes blade changes quick and easy
- Accessories include: Convenient folding stand, 10" continuous rim wet diamond blade, high volume water pump, miter block, rip guide and wrenches
- Allows user to manually change RPM's to accomodate different blades for use with a wide variety of materials.
- High volume water pump and dual spray system. Rust proof
SKIL 3550-02 7-Inch Wet Tile Saw with HydroLock Water Containment System
Whether you're updating or renovating, adding tile to your kitchen or bathroom is now easier than ever with the SKIL 7-inch Wet Tile Saw (3550). The saw's innovative HydroLock System keeps water splash to a minimum so tiles can be cut in the room where they're being installed. You no longer need to go back and forth to a saw set up in the garage or outside to cut the tiles, so the SKIL tile saw with HydroLock System helps you finish the project faster too! The 3550 works with a 7-inch continuous rim diamond blade, which provides efficient and even cutting. It also comes equipped with a durable rust-resistant aluminum table top and a sliding side extension that can be used to support tiles up to 18 x 18-inch.
- Hydro Lock Water Containment System keeps water contained near the blade and reduce clean-up time
- Sliding Side Extension provides support for tiles up to 18 x 18-in.
- Aluminum table top is a durable, rust-resistant surface
- Adjustable rip fence with miter gauge for accurate straight and miter cuts
- Bevel cuts tile at 0, 22.5 and 45 degrees, giving flexibility for different cut types.Spins the blade up to 3,600 RPM
Lackmond BEAST5 - BEAST Professional Wet or Dry Masonary/Tile/Stone Saw, 5"
The BEAST5 Wet Tile / Stone Saw is designed and engineered as a joint venture with Lackmond Products and Delta. It is capable of executing a diagonal cut or rip cut on virtually any size of tile or stone. The integrated plunge cut feature provides up to 1-1/4" depth of cut at 90Degree and an impressive 1" when in the 45Degree bevel position. Our high strength rip fence ensures accurate rip cuts over long tiles, and can be reversed to allow precise depth control when working on a flat surface. The 12 AMP motor makes the BEAST5 one of the most powerful saws in its class - easily capable of cutting through hard 3 cm thick granite slabs. Our one-piece gear box / handle assembly provides increased strength and allows for incredible cutting accuracy. The BEAST5 is designed to accept both concave and standard blades and is an essential tool for any tile or stone contractor.
- CUT VERSATILITY – The BEAST 5" Wet Tile Saw is capable of performing a diagonal cut on a 18" x 18" tile and can execute a 24" Rip Cut. Our 7" Tile Saw is comparable to most 10" Tile Saws on the market
- MOTOR POWER FOR ALL JOB TYPES – The powerful 12 AMP direct drive motor rotates to ensure accurate 22.5 and 45 bevel cuts. The plunge cut feature makes it easy to execute V-Cap cuts, cut-outs for wall sockets, and much more
- JOBSITE DURABILITY – Durable steel pipe saw frame is constructed to withstand the toughest conditions. Tube steel provides excellent strength without adding excess weight
- WATER SPRAY CONTROL – Snake-pipe water system provides absolute control over the placement and volume of water hitting the blade. Additional segments and an optional "Y-fitting" will allow customization and multiple streams if our users desire
FAB-125 A. Heavy-Duty 2.2HP Stone Cutter 5-inch Contour or Flat Blade Wet/Dry for stone, tile and masonry
The saw is designed for the rigorous day- to-day use of a fabrication shop. It is engineered with high-quality, top- of-the-line components. The saw is made to last with its 2.2 horsepower - 1650 watts of power to cut through 3 cm or 1-1/4" material with ease, making it the strongest saw in its class. Stainless steel contour blade adapter: The saw is designed to easily change between straight or contour blades, making it ideal for round bowl cutting. Direct port injection water feed system with 15 feet water hose: The direct port injection system allows for complete water saturation of the blade within the shroud itself, eliminating the plastic fork system. This also gives the operator improved visibility and better access for installation and removal of the blade, especially when installing a contour blade. It has 15 feet of braided reinforced polyurethane ether-based flexible hose that has a working pressure of 220 PSI. The brass hose bib and the full port solid brass ball valve make it a high quality, bulletproof completely assembled water feed that allows the operator to use line pressure with no need for any pressure regulator. Heavy-duty four bolt flange mounted sealed bearing system: This bearing system is designed for high production usage. The precision bearing is sealed to keep out dust, dirt and moisture which extends the life of the bearing. 2.2 horsepower -1650 watt motor with high temperature resistant internal windings: The saw power plant is a 2.2 horsepower - 1650 watt motor which gives the operator extra power to cut through thick materials with no effort and without having to step cut with a contour blade. With this extra power, the operator will never feel underpowered during the cut even when using rodding or curved contour blades. The windings are heat resistant up to 220 degrees, helping to prevent thermal meltdown which would create short circuiting and motor failure. This also help to extend the life of the saw during continuous usage.
- 2.2 HP - 1650 Watt Heavy-Duty, Long-lasting bearings, High Temperature Resistant Internal Windings
- Can use flat or contour diamond blade easy to install stainless steel contour blade adapter, Blade Not Included
- Cutting Depth 1-5/8'', Direct Port Injection Ball Valve Water Feed, 15 ft High Pressure Water Hose,Solid Brass Hose Bib
- Heavy-Duty Switch with Anti-Fatigue Double Finger Trigger,15 ft Power Cord, Built in G.F.C.I.
- Easy Adjustable Base Plate,Includes scratch resistant base plate padding
- Selling snapbacks
- Black and decker 18v battery charge time
- Puppy harness review
- Tool to unscrew stripped screws
- Rolling backpack for elementary school
- Dematting comb
- Strollers for twins 2015