Drilling a hole in tiles

Drilax 5 Pcs Diamond Drill Bit Set 3/4", 1", 1-1/4", 1-1/2", 1-3/4" - Wet Cutting Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Bottles, Lot 5 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucet Drilax052045

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

This is a great value set of 5 pieces: 3/4" (0.75 inch), 1 inch, 1 1/4" (1.25 inches), 1 1/2" (1.5 inches), 1 3/4" (1.75 inches)

Great Value

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1" in depth.

Shank sizes vary but the largest shank is 3/8" - common electric or rechargable drillers can be used.

Drilax diamond coated drill bits work great on a wide array materials such as Ceramic and Porcelain Tiles (both wall and floor), Glass Slabs, Fish Tanks, Aquariums, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Stucco, Rock slabs, etc.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE - PERFECT FOR DIY
Center pilot drill bits are for wood, metal, etc.; Drilax diamond drill bits do not require a pilot drill. Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Drilax has a variable diameter drill bit guide available on Amazon. This drill bit guide will secure on the surface and position the diamond drill bit.

Buy drilling a hole in tiles from Amazon.com
  • PREMIUM QUALITY, LONG LASTING, TALL (DEEPER CUTS) Diamond Hole Saw Drill Bit Tool Set in Elegant PU Zipper Storage Case. High Density Poly Insert Included. You can use it as a guide to keep the hole saw in position.
  • BUY AS A SET and SAVE OVER 80 Percent on MOST POPULAR 5 Sizes: 3/4, 1, 1-1/4, 1-1/2, 1-3/4 - Having these sizes available will help you cover almost all of your applications.
  • SPECIAL FEATURE : INCREASED DEPTH of CUT - These hole saws are 30 Percent TALLER (deeper) than most competitors. You can drill through thicker materials with our tools. 1-3/8 inch counter-tops are no problem. Shank size is 3/8 inch for common drills (corded electric, cordless rechargeable, upright, other rotary tools)
  • EXCELLENT RESULTS in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones.
  • DRILAX BUILT QUALITY - WE ARE HERE TO HELP. Shank sizes vary, maximum shank is 3/8" - suitable for all common electric drillers.







Buy drilling a hole in tiles from Amazon.com


Hole Saw Set,7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture, 1/1.2/1.6/2.4/2.8/3.15 inch Coated Core Drill Bits, Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

Diamond Hole Saws:
Material: high quality steel, diamond dust coating
Color: Silver
Size: 26-80mm/1"-3.15" 26mm(1 inch), 30mm(1.18 inch), 40mm(1.5 inch), 50mm(2 inch),60mm(2.36 inch),70mm(2.76 inch) 80mm(3.15 inch)
Quantity: 7 pcs

Hole Saw Guide:
Material: rubber base plastic shell steel
Minimum Drill Bit Dimension: 1/8"
Maximum Hole Saw Dimension: 3-1/4"

Two Fixing Modes Available:
Mode 1, Adjustable Plate Obverse Side: You can fix your hole saw with 4 bearing balls,for sizes up to 3-1/4 inches
Mode 2, Adjustable Plate Reverse Side: Place the plate reversely then remove one bearing ball to the bearing hole, you can fix your hole saw with 3 bearing balls,for sizes up to 1-3/4 inches

Warnings:
1.If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much.You're drill bit should never be hot to the touch, not even warm.
2.Not for use on Concrete or for depths beyond about 1/2".
3.Water is required for lubrication when drilling.

Package Includes:
1 Pcs Hole Saw Guide Jig Fixture
7 Pcs Diamond Coated Drill Bit

Buy drilling a hole in tiles from Amazon.com
  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable.
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges in seconds.
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws.
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes on tile, glass, marble, countertop, granite, etc.
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone






Buy drilling a hole in tiles from Amazon.com


Drilax 2-1/2 Diamond Drill Bit Hole Saw for Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Quartz Diamond Coated Circular Saw - Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool 2.5 Inches in Drilax010065

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 1/4" in depth.

Shank size is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Buy drilling a hole in tiles from Amazon.com
  • Durable Diamond Drilling Holesaw Tool 2 1/2" - 2.5 inches
  • Over 80 cost savings compared to big box stores. Use with standard electric or battery drillers.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
  • Shank sizes vary, maximum shank is 3/8" - suitable for all common electric drillers.


Buy drilling a hole in tiles from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set 5/32", 3/16", 1/4", 5/16", 3/8", 1/2" , 5/8" , 3/4" , 7/8" , 1" In Inch Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps 100425

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Shank sizes vary smallest 5/32" and the largest shank is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

You may want to invest in a Drilax Drill Bit Guide with support bearings, suction base and integrated coolant hole

Buy drilling a hole in tiles from Amazon.com
  • GREAT SET with 10 Mostly Used Sizes: from 5/32" in to 1 inch
  • HUGE COST SAVINGS compared to big box stores. Use with standard electric or battery drillers.
  • There is no need for a center pilot drill. These tools do not have center pilot drills. Use a guide
  • Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles
  • FOR ALL DRILLS - HAND - PORTABLE - UPRIGHT - Shank sizes vary, maximum shank is 3/8








Buy drilling a hole in tiles from Amazon.com


Drilax Diamond Hole Saw 6 5/16 Inches in Drilling Ceramic Porcelain Tile Glass Granite Drill Bit

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

Larger Than 6 Inches in Diameter - VERY Large Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

DRILAX Diamond Hole Saw - USE WITH WATER

Buy drilling a hole in tiles from Amazon.com
  • Diamond Coated Hole Saw Drilling Holesaw Tool 6 5/16" - Larger Than 6 Inches
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbors




Buy drilling a hole in tiles from Amazon.com


BLENDX Diamond Hole Saws Kit -Tile and Glass Hole Saws Cutting Drill Bits for Bottle, Ceramics, Porcelain 1/4" - 2" (6-50mm) - 10 Pack

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

BLENDX Diamond Drill Bits:
Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass.

Description:
Material: steel
Good Performance and long life.
Excellent for making clean and accurate hole on glass and tile.
Works better with a electric drill (Excluding in the item).
Size(outside diameter): 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm.
Total length: about 5.2cm
Applicable Industry: Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing.

Use note:

1. Start your hole diagonally, make a round trace and then hold drill straight.
2. Always use lubrication (water), otherwise the diamond core drill will burn.

Package Includes:
10pcs * Diamond Coated Drill Bit

Buy drilling a hole in tiles from Amazon.com
  • Diamond hole saw / core drill style bit.
  • 10 Sizes: 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm
  • Application: Drill Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone
  • SPEED KILLS: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
  • Warrnings: Not for use on Concrete or for depths beyond about 1/2"; Enough water is MUST HAVE for lubrication and cooling when drilling





Buy drilling a hole in tiles from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets

10 Popular Sizes: 1/4 to 2 - Elegant storage case.

High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2

Popular 10 Sizes - Great Value

No need for Center Pilot Drills

Please Do NOT Use Dry

Maximum 3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guides

Buy drilling a hole in tiles from Amazon.com
  • Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
  • Best value set in durable zipper case. Great gift idea for any DIY lover.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
  • Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.





Buy drilling a hole in tiles from Amazon.com


Neiko 00823A Diamond Grit Hole Saw Drill Bit Set, 5 Piece 5/32

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

Neiko 5-piece 5/32 to 1/2-inch diamond dust hole saw set. 1/4-inch shank size, saw sizes: 5/32, 1/4, 5/16, 3/8 and 1/2-inch. Heavy duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.

Buy drilling a hole in tiles from Amazon.com
  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
  • Side holes allow for easy slug removal after drilling
  • Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
  • Nickel plating on these bits maximizes your tool's life with great resistance to corrosion
  • Sizes include: 5/32", ", 5/16", 3/8", and " with a cutting depth of "and " shank





Buy drilling a hole in tiles from Amazon.com


3 Pcs SET Diamond Hole Saw Drill Bit Set Granite Glass Tile - Tools 3 Piece Diamond Dust Hole SAW Drill BIT for Ceramic Tile Marble Rock Porcelain - 1/2" -3/4" - 1" Inch In

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes.

Center pilot hole drills are mostly for wood, metal, etc. Drilax tools can drill 1 in depth. Shank sizes vary but the largest shank is 3/8 common electric or rechargable drillers can be used.

Drilax diamond coated drill bits work great on a wide array materials such as Ceramic and Porcelain Tiles (both wall and floor), Glass Slabs, Fish Tanks, Aquariums, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Stucco, Rock slabs, etc. Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool: a- You can build a mini water dam around the hole with plumbers putty. b- You can choose to spray water on the drill bit. c- Or you can use running water to cool the drill bit.

EASY TO USE PERFECT FOR DIY Center pilot drill bits are for wood, metal, etc.;

Drilax diamond drill bits do not require a pilot drill. Here is how you can keep the drill bit on target:

a- You can make your own guide out of plywood plastic or even a card board.All you need is to keep the drill bit in place until it makes the initial marks.

b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.

c- You can manually guide the drill bit with wet sponge. Please use protective gear. Drilax has a variable diameter drill bit guide available on Amazon. This drill bit guide will secure on the surface and position the diamond drill bit.

Buy drilling a hole in tiles from Amazon.com
  • PERFECT DIAMOND HOLE SAW DRILL BIT TOOL SET - 3 Common Sizes: 1/2 inch 3/4 inch and 1 inch. Packed in air tight PVC wrap.
  • STANDARD 3/8 inch Shank for STANDARD electric or rechargeable drills, handheld or upright.
  • FOR ALL DIY PROJECTS: Drilling Holes in Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks. Installing Faucets, Showers, Pipes for Renovating Kitchen, Bathroom, Shower, etc.
  • BUY AS A SET AND SAVE OVER 80 Percent, compared to big box store. Our customers love these high quality diamond tools.
  • WE ARE HERE TO HELP WITH YOUR PROJECTS. There is no need for a center pilot drill. These tools do not have center pilot drills. Do NOT run dry. These Diamond Coated Tools will work best if you use water to keep the tools cool.
Buy drilling a hole in tiles from Amazon.com


1-1/2" 38.4 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Stone, Porcelain

Buy drilling a hole in tiles
Check Price on Amazon
Buy drilling a hole in tiles from Amazon.com

Description:

* DiamondSure bonded diamond core drill bits cut through materials where other bits fail. They are designed to drill in the hardest surfaces or the most delicate and fragile. * DiamondSure bits can be used in any standard variable speed drill. They are electroplated, blonded and designed for drilling to depths of about 1/2" in ceramic tile, porcelain tile, glass block, slate, marble, quartz, granite, limestone and more! Not designed for use on concrete, masonry, metal or for use with impact hammer drills.

Buy drilling a hole in tiles from Amazon.com
  • DiamondSure bonded diamond core drill bits cut through materials where other bits fail.
  • They are electroplated
  • Not designed for use on concrete, masonry, metal or for use with impact hammer drills.




Buy drilling a hole in tiles from Amazon.com


Drilling a hole in tiles