Drill bit for drilling through metal

Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90 and 118. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

Tests shows that the M35 cobalt steel drill bits can penetrate a 5mm-thick 304 stainless steel plate in 5 seconds.

Not Suitable for Hardened Steel

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers, although some others said they worked well with hardened steel.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.

Buy drill bit for drilling through metal from Amazon.com
  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant; for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
  • NO CENTER PUNCH NEEDED - The 135 Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
  • 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.
  • SATISFACTION GUARANTEED - Here at Migiwata, we do care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.






Buy drill bit for drilling through metal from Amazon.com


DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6-inch to 1/2-inch in a plastic tough case.

Buy drill bit for drilling through metal from Amazon.com
  • Titanium pilot point for longer bit life
  • Starts on contact for cleaner holes
  • No spin shanks
  • Tapered web provides greater durability to reduce breaking
  • Includes sizes from 1/16-inch to 1/2-inch in a plastic tough case



Buy drill bit for drilling through metal from Amazon.com


CO-Z Step Drill Bits, HSS 5PCS Titanium Step Drill Bit Set, 50 Sizes in 5 High Speed Steel Unibit Drill Bits Set for Sheet Metal with Aluminum Case, Multiple Hole Stepped Up Bits for DIY Lovers

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Specifications Item Type: Step Drill Size: #1: 3/16" to 1/2" 6 Steps (3/16'', 1/4'', 5/16", 3/8'', 7/16'', 1/2'') #2: 1/8" to 1/2" 13 Steps (1/8", 5/32", 3/16'', 7/32", 1/4'', 9/32", 5/16", 11/32", 3/8'', 13/32", 7/16'', 15/32", 1/2'') #3: 1/4" to 3/4'' 9 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4") #4: 1/4" to 1-3/8" 10 Steps (1/4'', 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8") #5: 3/16" to 7/8" 12 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8")" Features 1. Cobalt added reduces friction and lasts longer than those which does not contain cobalt bits. 2. High speed steel for longer service life. 3. Double cutting blades design enables a faster and smoother cutting. 4. Automatically deburrs holes while drilling 5. 3-sided shank prevents slip in drill chuck 6. Includes a protective aluminum case to make the drills not easy to dull. 7. The sharpness and titanium coating ensure easily cut through most sheet metal, plastic and of course wood and some other materials with ease. Package 5x Step Drill Bit Set 1x Aluminum Case.

Buy drill bit for drilling through metal from Amazon.com
  • Extreme Durabikity: Cobalt high speed steel drill bits along with the titanium coating ensures extreme durability, will stay new and shiny for years to come.
  • Different Sizes of Holes Can Be Drilled: Different sized shanks ensure compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You are capable to drill holes in different sizes which can meet your normal needs.
  • Smooth Drilling: Non-walking drill tip provides fast and smooth drills on steel sheets, aluminum sheets, wood board, plastic board etc. (the board must be smaller in thickness than the height of step drill bits).
  • Use Center Punch to Mark the Spot: Please mark the spot that you are to drill for easier drilling and improved drill bits life.
  • Keep Your Step Drill Bits Well Organized: All the bits come in a well-organized case for easy transport and storage.






Buy drill bit for drilling through metal from Amazon.com


Chicago Latrobe 150ASP Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Heavy Duty, Black Oxide Finish, 135 Degree Split Point, Inch, 15-piece, 1/16" - 1/2" in 1/32" increments

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Chicago Latrobe 150ASP Series Drill Set with Metal Case - Sizes in Set: 1/16" - 1/2" x 32nds; Number of Tools: 15; Material Type: HSS; Point Angle: 118 Degrees; Finish/Coating: Black Oxide

Buy drill bit for drilling through metal from Amazon.com
  • Set of 15 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/32" increments
  • High-speed steel (HSS) provides hardness for wear resistance
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Made in the USA





Buy drill bit for drilling through metal from Amazon.com


Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast Iron and Hard Metals

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90 and 118. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

Not Suggested for Hardened Steel, High Carbon Steel and Steels Blended with Impurities

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

About Breakage

Please be careful when you drill holes with shese needle-like small bits. They're more likely to break than larger ones.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.

Buy drill bit for drilling through metal from Amazon.com
  • M35 Cobalt Steel - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
  • No Center Punch Needed - the 135 quick-cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
  • For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
  • 50pcs Set - The set includes 50pcs of metric M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 10pcs of each size. These bits are quite small. Please refer to a second product picture.
  • Satisfaction Guaranteed - Here at Migiwata we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.






Buy drill bit for drilling through metal from Amazon.com


Bosch TI14 Titanium Metal Drill Bit Set (14 Piece)

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Bosch titanium-coated metal drill bits have been designed to satisfy the needs of HVAC or facility maintenance technicians, contractors and other pros who need solid, reliable bits for general-application drilling in high-carbon steel and light-gauge metal, as well as wood and plastic. The split-point tip has been engineered for no-skate starts and clean, accurate holes. The bit provides 2x longer life than standard drill bits, thanks to the tip design and titanium coating. The three-flat shank design on bits 3/16 in. And larger promotes better gripping and guards against slipping.

Includes bits: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8", (1) 1/2"

Buy drill bit for drilling through metal from Amazon.com
  • No-skate tip for clean and accurate starts
  • Titanium coating generates less friction for 2x longer life
  • Three-flat shank promotes better grip on bits 3/16 in. And larger
  • Universal drilling applications designed for general-purpose use
  • High visibility marking provide clearly marked diameter
  • Included bit sizes: (1) 1/16", (1) 5/64", (1) 3/32", (1) 7/64", (2) 1/8", (1) 9/64", (1) 5/32", (1) 3/16", (1) 7/32", (1) 1/4", (1) 5/16", (1) 3/8", (1) 1/2"

Buy drill bit for drilling through metal from Amazon.com


DEWALT Black Oxide Drill Bit Set, 20-Piece (DW1177)

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

DEWALT DW1177 20-Piece Black-Oxide Metal Drill Bit Set

Buy drill bit for drilling through metal from Amazon.com
  • The product is 20PC BLK OX Bit Set
  • Easy to use
  • The product is manufactured in China
  • Black oxide finish for greater wear protection
  • Parabolic flute design for greater bit strength
  • Includes tough case container to keep bits organized
  • Sliding soft-grip lock keeps case closed securely
  • Black oxide finish for greater wear protection
  • Black oxide finish for greater wear protection
  • Parabolic flute design for greater bit strength
  • 135-degree split-point design reduces slip and walking
  • Includes tough case container to keep bits organized
  • Sliding soft-grip lock keeps case closed securely




Buy drill bit for drilling through metal from Amazon.com


Tacklife PDH06A Classic Titanium Step Drill Bit Set & Automatic Center PunchHigh Speed Steel 5-Piece Set Total 50 SizesDouble Cutting Blades Design with Aluminum Case

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.

Features:
1. Cobalt added reduces friction and lasts longer than those which does not contain cobalt bits;
2. The sharpness and titanium coating ensure easily cut through most sheet metal,
plastic and some other materials with ease;
3. Laser marking makes the size more clear;
4. X-type openings design to facilitate the removal of cutting waste when drilling;
5. Double cutting blades design enables a faster and smoother cutting;
6. High speed steel for longer service life;
7. 3-sided shank prevents slip in drill chuck;
8. Delivers an automatic spring-driven strike when pressed against surface;
9. Adjustable cap regulates striking force;
10. Brass body has a deeply knurled surface for nonslip control.


Specification:
Size:
#1: 1/4" to 1-3/8" 10 Steps (1/4'', 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8")
#2: 3/16" to 7/8" 12 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8")
#3: 1/4" to 3/4'' 9 Steps (1/4'', 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")
#4: 1/8" to 1/2" 13 Steps (1/8", 5/32", 3/16'', 7/32", 1/4'', 9/32", 5/16", 11/32", 3/8'', 13/32", 7/16'', 15/32", 1/2'')
#5: 3/16" to 1/2" 6 Steps (3/16'', 1/4'', 5/16", 3/8'', 7/16'', 1/2'')


Note
Check the concentricity of the spindle and spring chuck and the clamping force of spring chuck,
for the concentricity may cause the drill bit broken and make drill hole too large.


Package:
5 x Step Drill Bit Set
1 x Automatic Center Punch
1 x User's Manual
1x Aluminum Case

Buy drill bit for drilling through metal from Amazon.com
  • 50 SIZE IN 5 - The bits set includes five standard step drill bits that can replace 50 individual drill bits, you can process 50 different kinds of diameter holes with the five pieces
  • HSS & TITANIUM COATING - High speed steel makes it last longer than others, titanium coating ensures easily cut through steel sheetsaluminum sheetscopper & plastic & wood board and many other types of sheet metal with ease, and it can automatically deburr holes while drilling to keep the drill bit clean
  • AUTOMATIC CENTER PUNCH & PROTECTIVE ALUMINUM CASE - the center punch delivers an automatic, high-impact, spring-loaded strike through adjusting the cap; its brass body has a deeply knurled surface for nonslip control; and the carbide tipped bit makes the center punch 10 times stronger than normal one;protective aluminum case makes the drills not easy to dull
  • DOUBLE CUTTING BLADES & THREE-SIDED SHANK - Double cutting blades and X-type openings design ensures a faster and smoother cutting; and 3-sided shank design prevents slip in drill chuck; Provided with small pressure and the sets can cut through the wood, sheet metal, steel and other surfaces
  • WHAT YOU GET - Tacklife Step Drill,Automatic Center Punch, Aluminum Case, User's Manual, 24 months warranty-Ideal Gift for Father's Day
Buy drill bit for drilling through metal from Amazon.com


Impact Drill Bit Set for Hardened Metal 7 pcs German High Speed Steel Bits for Professional Duty with Metal Case

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Proffi's High speed steel drill bit set is made exclusively in Europe from best quality M2 steel, which is produced in Germany, France and Austria. Our drill bits are made from solid metal, while most of the manufacturers reduce costs by using the best quality metal only for tip of the drill bit. Furthermore each of the drill bit set quality is manually inspected to ensure maximum quality and reliability:

Perfect for metals, alloyed, constructional steels, cast iron, plastic and other materials.

Specially designed split-point for easy drilling start and great performance.

Made of M2 High Speed steel produced exclusively from three vendors: Erasteel (France); Beulmann (Germany); Boehler International (Austria).

Perfect hardness score (HRC - Rockwell scale): 62,5 - 63,5. Lower score results in lower durability; higher score results in fragility of a drill bit.

Production line is set up to meet DIN, JIS, ANSI, GOST and ISO EN 9001 standards. The drill bit set consists of seven drill bits, which are carefully selected to meet all the housework and construction needs.

Proffi's drill bits are used by top companies in aeronautics, German car manufacturers, premium class tyres manufacturer, luxury Swiss watches company and etc,

Buy drill bit for drilling through metal from Amazon.com
  • ENHANCED DURABILITY. Up to 25 times more durable than regular HSS drill bit. Proffi's set is the best choice for professional/ industrial use and advanced specialists.
  • PERFECT PERFORMANCE. Drill bits scored 63,5 in Rockwell scale, what ensures maximum durability with lowest fragility in the class of professional drill bits. Each drill bit has 135 degree split-point which ensures precise drilling start and perfect accuracy.
  • UNIVERSAL. Perfect for drilling hardened steel, cast iron, carbon, alloys, cast iron, plastic and other materials. Drill bits sizes are carefully selected to meet the needs of the most demanding professionals in all cases.
  • MADE IN EUROPE. Made of M2 HSS (with at least 5 Tungsten) produced exclusively from three vendors: Erasteel (France); Beulmann (Germany); Boehler International (Austria). Each drill bit is manually inspected by quality experts to ensure superior quality.
Buy drill bit for drilling through metal from Amazon.com


Titanium Drill Bit Set for Metal - 230pc Kit - Coated HSS - From 1/16" up to 1/2 Inch

Buy drill bit for drilling through metal
Check Price on Amazon
Buy drill bit for drilling through metal from Amazon.com

Description:

Multiple quantity bits of the same diameter, especially the common smaller sizes. so you do not run out of specific bits in case you lose a few. Excellent collection! Recommended for professionals & DIY alike

Buy drill bit for drilling through metal from Amazon.com
  • Includes drill bit sizes from 1/16" up to 1/2" bits
  • For use on Wood, Metal, Fiber Glass & Plastics (Not for use on Concrete / Masonry)
  • Titanium coated HSS for maximum durability & Lasts X6 more than conventional bits
  • All sizes are printed on tray to help keep the bits organized
  • includes heavy duty storage case
Buy drill bit for drilling through metal from Amazon.com


Drill bit for drilling through metal