Make a hole in glass

Drilax 10 Pcs Diamond Drill Bit Set 5/32", 3/16", 1/4", 5/16", 3/8", 1/2" , 5/8" , 3/4" , 7/8" , 1" In Inch Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps 100425

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Shank sizes vary smallest 5/32" and the largest shank is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

You may want to invest in a Drilax Drill Bit Guide with support bearings, suction base and integrated coolant hole

Buy make a hole in glass from Amazon.com
  • GREAT SET with 10 Mostly Used Sizes: from 5/32" in to 1 inch
  • HUGE COST SAVINGS compared to big box stores. Use with standard electric or battery drillers.
  • There is no need for a center pilot drill. These tools do not have center pilot drills. Use a guide
  • Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles
  • FOR ALL DRILLS - HAND - PORTABLE - UPRIGHT - Shank sizes vary, maximum shank is 3/8








Buy make a hole in glass from Amazon.com


Easy to Make Wine Bottle Lights Glass Diamond Drill Bit Set for Glass Bottles FREE Instructions and Idea Guide

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

One day in September, Emily called. She and her husband had been our customers for several years. They made wine bottle and glass block lights. She sold them at their church's Fall Festival to raise money for an annual mission trip. But now, she was worried.

This last year, her husband passed away. She didn't think that she could drill the wine bottles and block by herself.

I explained that we have a simple way to drill glass that anyone can do. All she needed was her drill, the diamond drill bits and a kitchen scrubbing sponge. She cut a v-shaped notch in the end of the sponge and used the notched sponge to hold the drill bit in place. Water from the sponge keeps the bit wet and cool.

Her Fall Festival was a success. Your wine bottle lights and glass block will be too.

We didn't invent this wet sponge drilling. My dad showed me and we're passing it along to you. It's simple and it works.

You'll make lighted holiday decorations. Easy drilling instructions mean that you can make wine bottle lights and lighted "Christmas presents" from glass block. As a bonus, you can use these bits to make bird feeders too.

Diamond core bits drill holes in wine bottles or glass block in just 1-2 minutes. You won't break any bottles or glass block.

Every order receives 5 pages of decorating light ideas. This set has the 2 most popular sizes for drilling glass, " and ". The Christmas string lights fit through easily. The 3/4" size is more popular with crafters making a larger volume of lights.

These diamond core bits (diamond hole saws) are the best value that you'll find on the web or anywhere else. They have a 1" depth of cut, 5/16" arbor or shank. Use your regular handheld drill or drill press. Easily drill 20-30 holes with each bit.

It really is an easy decision. You'll be glad you did! Click Add To Cart

Buy make a hole in glass from Amazon.com
  • 1/2" and 3/4" premium quality diamond core drill bits for wine bottles, glass block, glass jars
  • FREE 4 page drilling instruction guide. FREE 5 page decorating ideas guide
  • FREE shipping in the US. No risk - 100 money back guarantee
  • EASY - Use your kitchen scrubbing sponge for drilling. It holds the glass and cools the drill bit.
  • You'll make wine bottle lamps, lighted glass block, bird feeders and more








Buy make a hole in glass from Amazon.com


DRILLPRO Diamond Hole Saw, 15 Pcs Tile Hole Saw Drill Bit, Hole Remover Tools for Glass, Porcelain, Ceramic, Granite Stone Drill Bits 6-50mm

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Specifications of the Tile Hole Saw :
Material: high quality steel, diamond dust coating
Color: Silver.
Size: 6 - 50mm/0.23"-1.97"
6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 26mm, 28mm, 30mm, 40mm, 50mm
Quantity: 15 pcs


Features:
Good performance:diamond dust coating offers superior performance and cutting strength
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials
and only needs water for lubrication.
15 SIZES: No matter which size hole you want, it can always drill a perfect hole for you.


How to Use DRILLPRO Tile Hole Saw drill correctly
Step1:Use pen to mark start of holeand keep wet with WATER or COOLANT.
Step2:Angle drill 45 degrees to start hole, and being drilling at low speeds.
Angle drill to vertical position once the hole has started.
Step3:Minimum pressure.Slow speed down for exit hole or drill from the other side to prevent breakthrough.


Note:
If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much.
You're drill bit should never be hot to the touch, not even warm.
Slowest speed
Always use lubrication (water)
Minimum pressure


Why Choose DRILLPRO
Good quality and reliable brand.
Within 90 days product quality is not completely satisfied, please CONTACT US, 100 refund.
24-hour feedback excellent customer service

Package Included:
15 x Tile Hole Saw
1 x Kraft Paper Package
1 x User Manual

Buy make a hole in glass from Amazon.com
  • Diamond Hole Saw is made of HIGH QUALITY NATURAL DIAMOND SAND, which is solidified by special enhanced electroplating
  • NICKEL-PLATED DESIGN, with a diamond dust coating offers diamond hole saw a superior performance and cutting strength
  • NO Tremor phenomenon, SMALL incision resistance and FAST hole speed, EASY chip evacuation, ensuring you a nice experince when using diamond hole saw.
  • The package comes with 15 SIZES of Diamond Hole Saw - 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm, Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone (especially for glass AND tile)
  • OPERATION of the Diamond Hole Saw - Start the hole diagonally, make a round braid and then hold drill straight. Water is required for lubrication when drilling.








Buy make a hole in glass from Amazon.com


Drilax 5-1/2 Diamond Coated Hole Saw Ceramic Porcelain Tiles Glass Granite Flooring Tile Drill Bit 5 1/2 Inches in

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Large Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

DRILAX Diamond Hole Saw

Buy make a hole in glass from Amazon.com
  • Diamond Coated Hole Saw Drilling Holesaw Tool 5 1/2" - Larger Than 5 Inches
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbor



Buy make a hole in glass from Amazon.com


Drilax Diamond Hole Saw 6 5/16 Inches in Drilling Ceramic Porcelain Tile Glass Granite Drill Bit

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Larger Than 6 Inches in Diameter - VERY Large Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

DRILAX Diamond Hole Saw - USE WITH WATER

Buy make a hole in glass from Amazon.com
  • Diamond Coated Hole Saw Drilling Holesaw Tool 6 5/16" - Larger Than 6 Inches
  • EASILY Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite, Quartz - USE WATER TO COOL
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
  • Cylindrical Shank 3/8" - No Need for Adapters or Arbors




Buy make a hole in glass from Amazon.com


Hole Pro X-305 1-7/8" to 12" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Adjustable hole cutter kit

One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.

Twin blades with infinite adjustment 1-7/8" to 12" for faster cutting of recessed light cans and most ceiling speakers with perfect balance.

Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides

No need for balance bars which can break off

Kit includes
-Pro grade adjustable hole cutter
-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings
-Sturdy Carry Case
-Replaceable blade sets of BOTH HSS (located in the upper right hand corner of the carry case) for wood, plastics, acoustic tile, tongue & groove, laminates, rubber AND TUNGSTEN CARBIDE blades (installed in the hole cutter) for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
-hex wrenches

The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.

Please visit www.holepro.com for product videos and details about our products.

Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint exists

Cut holes in plywood up to 8" in diameter with 18 volt cordless drill

Like all Hole Pro Power Series kits the safety dust shield (14" OD) can be used with the Hole Pro XL-Arbor kit (HP1168 -NOT INCLUDED) to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as the adjustable hole cutters

5 year warranty against defects (except when used in commercial drill presses).

Do NOT USE with STUD DRILLS

NOT MADE FOR USE WITHOUT PILOT BIT

Buy make a hole in glass from Amazon.com
  • Twin blades for faster/smoother cutting, strong shield traps dust & controls cutting depth
  • User replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
  • Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
  • 14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
  • Complete kit - add your 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut







Buy make a hole in glass from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets

10 Popular Sizes: 1/4 to 2 - Elegant storage case.

High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2

Popular 10 Sizes - Great Value

No need for Center Pilot Drills

Please Do NOT Use Dry

Maximum 3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guides

Buy make a hole in glass from Amazon.com
  • Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
  • Best value set in durable zipper case. Great gift idea for any DIY lover.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
  • Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.





Buy make a hole in glass from Amazon.com


Deluxe Shave Well Fog-free Shower Mirror - Made in the USA - 33 larger than the Original Shave Well Anti-Fog Shower Mirror

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Warm it up!
To get a truly fog-free reflection with your Shave Well mirror, hold it under the shower stream for a few seconds to "warm it up" right before you shave.

What is fog and why does it happen?
Fog is simply condensation. Shower water is much warmer than the air temperature of most homes. Your warm shower heats the air and it becomes saturated. This warm moist air becomes fog or condensation which collects on all cooler surfaces - like mirrors.

In the few seconds you hold your mirror under the shower spray the temperature of the moist air and the mirror equalize to create a long lasting, truly fog free image for the duration of your shower. No more temperature difference - no more fog.

Suction cups don't suck!
The Shave Well adhesive hook will stick long after a suction cup would lose its suck.

As Goldilocks said it's just right.
The Deluxe Shave Well Mirror measures 6.83" tall, 5.25" wide and is 1/8" thick. The base of the adhesive hook (the part that sticks to the wall) is 1" x 1 1/2"

The best part of the Shave Well story
Your Shave Well mirror was assembled at Sunshine Industries, a vocational training facility in Knoxville, Tennessee for people with intellectual and developmental disabilities. A smile is worth a thousand words when you see participants learn, grow and obtain new levels of confidence and personal satisfaction for a paid job well done. So while you enjoy that crystal clear reflection from your Shave Well mirror, give yourself a smile as you are helping make it possible for individuals with disabilities to work in a safe, encouraging and fulfilling environment.

Buy make a hole in glass from Amazon.com
  • The best shower shave mirror due to its unique design. NO FOG. NO SUCTION CUPS.
  • Mirror removes from adhesive hook (included).
  • It works on basic science - Hold the mirror under shower stream where temperature of the shower and mirror will equalize for a long lasting, fog free reflection.
  • Easy to clean - Wet mirror and clean with a pea-sized drop of toothpaste to keep spots away. It will look like new after years of use.
  • The Deluxe Shave Well Mirror measures 6.83" tall, 5.25" wide and is 1/8" thick. The base of the adhesive hook is 1" x 1.5".






Buy make a hole in glass from Amazon.com


Neiko 00823A Diamond Grit Hole Saw Drill Bit Set, 5 Piece 5/32

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Neiko 5-piece 5/32 to 1/2-inch diamond dust hole saw set. 1/4-inch shank size, saw sizes: 5/32, 1/4, 5/16, 3/8 and 1/2-inch. Heavy duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.

Buy make a hole in glass from Amazon.com
  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
  • Side holes allow for easy slug removal after drilling
  • Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
  • Nickel plating on these bits maximizes your tool's life with great resistance to corrosion
  • Sizes include: 5/32", ", 5/16", 3/8", and " with a cutting depth of "and " shank





Buy make a hole in glass from Amazon.com


Insinkerator BADGER1CORD Household Food Waste Disposer with Cord, 1/3 Horsepower, Grey

Buy make a hole in glass
Check Price on Amazon
Buy make a hole in glass from Amazon.com

Description:

Badger garbage disposals are a reliable and functional choice when affordability is the prime concern. From the powerful induction motors to the rugged galvanized steel construction, the Badger 1 food waste disposer delivers exceptional performance.

Buy make a hole in glass from Amazon.com
  • 26-ounce grind chamber with galvanized steel grind system
  • 1/3 Horsepower dura-rive induction motor
  • Power cord included

Buy make a hole in glass from Amazon.com


Make a hole in glass