Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub
Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the () terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.
- Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
- 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
- Thermal Protection Circuit, Short Protection Circuit.
- Overload Protection Circuit. Phase Switch: 0 or 180.
- Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.
- Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz.
- Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.
- Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.
Polk Audio PSW10 10" Powered Subwoofer - Featuring High Current Amp and Low-Pass Filter Up to 100 Watts Big Bass at a Great Value Easy integration Home Theater Systems
PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industrys most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
- LOUDER CLEARER SOUND EVEN AT HIGH VOLUME - Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion. PSW Series subwoofers blend perfectly with systems composed of other Polk loudspeakers, especially TSi, RM and R/T/M Series speakers
- DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
- EASY TO INTEGRATE WITH EXISTING SYSTEMS - Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
- A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for a multiple subwoofers, make this sub cohesive and complete
Sound Storm LOPRO10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space
Give your vehicle's audio system an upgrade with the SSL LoPro10 Class A/B 10"" Low Profile Amplified Subwoofer. This powerful Amplified Subwoofer features 1200 Watts Max Power with a MOSFET power supply to take your music to the next level. With High and Low Level Inputs it can be hooked up to just about any in-dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control and Remote Subwoofer Control. Gear up and get your music thumping with the Sound Storm LoPro10.
For further product details, please scroll down.
- BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it; RMS Power Handling: 600 Watts
- DIMENSIONS: 15.2 inches in Depth, 11.2 inches in Width and 2.8 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
- WARRANTY: BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
Rockville RTB10A 10" 500w Powered Subwoofer Bass Remote Amp Kit
Introducing the Rockville RTB10A Powered Subwoofer Enclosure. We at Rockville just had to manufacture a high quality powered bass enclosure. Growing up one of my best friends bought a car and it had a powered bass enclosure in it. The sound that it produced was just amazing and I will never forget it. & ; Features: Rockville RTB10A 10 & ; 500w Powered Subwoofer Bass enclosure With Bass Remote 500 Watts Peak/250 Watts RMS 10 & ; High power woofer in vented tubular enclosure Integrated, built-in 250 Watts RMS Rated amplifier Rear aero vent bass system Speaker level and RCA line-level input Frequency response: 30Hz-200Hz Sensitivity: 108 dB Adjustable bass crossover Dashboard adjustable bass remote control Molded steel woofer grill Four steel mounting jackets two canvas straps with Velcro fasteners Tube is covered in durable aviation grade tweed with embroidered logo Dimensions: 10. 75 & ; x 20. 86 & ; Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable 17' 10 Gauge Translucent Blue Super Flex Power Cables 17 18 Gauge Blue Remote Cable 17 16 Gauge Clear Speaker Wire 3' 10 Gauge Clear Super Flex Ground Wire Gold Plated AGU Heat Resistant Fuse Holder 40 Amp ATU Inline Fuse 7 Split Tube Loom Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets & ; Soft passion proof insulating jacket allows for 100 improved flexibility PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- Rockville RTB10A 10" 500w Powered Subwoofer Bass Enclosure With Bass Remote. 500 Watts Peak/250 Watts RMS. 10" High power woofer in vented tubular enclosure. Integrated, built-in 250 Watts RMS Rated amplifier. Rear aero vent bass system
- Speaker level and RCA line-level input. Frequency response: 30Hz-200Hz. Sensitivity: 108 dB. Adjustable bass crossover. Dashboard adjustable bass remote control
- Molded steel woofer grill. Four steel mounting brackets two canvas straps with Velcro fasteners. Tube is covered in durable aviation grade tweed with embroidered logo. Dimensions: 10.75" x 20.86"
- Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder
- 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
Pioneer TS-WX1210A 12" Sealed enclosure active subwoofer with built-in amplifier
12" Sealed enclosure active subwoofer with built-in amplifier
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier, Power Handling: Peak: 1300W / RMS: 350W, Preloaded with a single 12" Subwoofer, Built-in Class D amplifier, Sealed enclosure with carpet
- Subwoofer Features: Cellulose fiber cone, Urethane surround, Frequency Response: 20 - 125, Sensitivity: 114dB
- Amplifier Features: Class D amplifier, Cross Overs, 0-12dB Bass Boost, Remote knob included
- Enclosure Features: Carpet finish
Rockville USS10 10" 800w Slim Under-Seat Powered Car/Truck Subwoofer SubAmp Kit
The USS10 is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.9" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean. This is a true all in one subwoofer system with the sub in the enclosure, and a top of the line amp built in.
Rockville USS10 800 Watt 10" Slim Car Subwoofer
800 Watts Peak / 200 Watts RMS
PWM MOSFET Power Supply
Low Level RCA Input
High Level Inputs with Auto Turn-On Technology
Adjustable Input Sensitivity
Soft Delayed Remote Turn-On
Thermal Protection Circuit, Short Protection Circuit
Green Power/Red Protect LED
Phase Switch : 0 or 180
Low Pass Filter : 50Hz - 150Hz
Bass Boost : 0 - 12dB @ 45Hz
Subsonic Filter : 20Hz - 50Hz
THD < 0.15
Subwoofer Level Remote Control
Fuse Rating : Single 25A
Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
(1) 17 High Grade Twisted Pair of 100 Copper RCA Cable
17' 10 Gauge Translucent Blue SuperFlex Power Cables
17 18 Gauge Blue Remote Cable
17 16 Gauge Clear Speaker Wire
3' 10 Gauge Clear SuperFlex Ground Wire
Gold Plated AGU Heat Resistant Fuse Holder
40 Amp ATU Inline Fuse
7 Split Tube Loom
Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Soft abrasion proof insulating jacket allows for 100 improved flexibility
PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F
- Rockville USS10 800 Watt 10" Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity.
- Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED. Phase Switch : 0 or 180. Low Pass Filter : 50Hz - 150Hz. Bass Boost : 0 - 12dB @ 45Hz. Subsonic Filter : 20Hz - 50Hz. THD < 0.15. Subwoofer Level Remote Control. Fuse Rating : Single 25A.
- We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.
- Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable.
- 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100 improved flexibility . PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F. .
MTX TNE212D 12" 1200W Dual Loaded Car Subwoofers Box Planet 1500W Amp Kit
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems. Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers Designed For SPL, Rock your car and the neighborhood! Easy Installation, Mounts quickly in most trunks and SUVs We are an authorized MTX dealer!
- New MTX TNE212D 12" 1200W Car Subwoofer Enclosure
- 1200 Watt Max
- 400 Watt RMS
- Rubber Surround
BOSS Audio R1100M Monoblock Car Amplifier 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, MOSFET Power Supply, Remote Subwoofer Control
Shift your audio experience up a gear with the Boss Audio Riot R1100M Class A/B Monoblock Amplifier. This powerful 2-Ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. Customize the sound with Variable Low Pass Crossover and Bass Boost. Tweak the Bass and feel the vibes with the Remote Subwoofer Control. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Drive up the beat with the Boss Audio R1100M.
For further product details, please scroll down.
- POWER: Maximum Power Output of 1100 Watts at 2 Ohms into one channel. MAX power output of 550 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1100M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1100M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it
- DIMENSIONS: The R1100M is 9.1 inches in Depth, 10.4 inches in Width and 2.3 inches in Height. It can be installed in a variety of different places due to its' slim and compact design
- WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
BIC America WTR-SYS Wireless Transmitter/Receiver Kit for Hookup of Wireless Subwoofers and Wireless Powered Speakers
The BIC America wireless transmitter/receiver kit makes it easy to connect your powered subwoofer and powered speakers wirelessly. It offers a range of 80 ft. Unobstructed and up to 60 ft. Obstructed with no interference, delay or drop outs. It's super compact size and self-adhesive Velcro strips enable multiple placement options. Put your subwoofer where it looks and sounds best without the hassle of a cable. Connect the wireless transmitter to your a/V receiver, PC, Mac, mobile device, TV or any product with a 3.5mm or RCA connector and send a signal to any powered speakers in your home. With setup in just minutes, you can immediately enjoy CD-quality sound from your patio, second audio Zone or anywhere.
- 4-Channel wireless audio transmitter/receiver system
- Enables easy wireless hookup for powered subwoofers & powered speakers
- Solves wiring problems quickly & easily. Note- for powered speaker hookup, you're A/V receiver must have variable pre-amp out RCA jacks)
- Works with a/V receivers, Mac, PC, mobile devices & all other products with 3.55mm or RCA connectors
- No front-to-back of room wires or cables
- External antennas enable extended 80ft unobstructed wireless range & up to 60ft obstructed
- Includes self-adhesive Velcro strips, transmitter, receiver, 2 external antennas, 2 USB AC power adapters, 2 USB cords, 2 RCA to RCA stereo patch cables, 2 RCA Y-Adapter cables & two 3.5mm stereo to RCA cables
Rockville RBG15S 1600w Active Powered PA Subwoofer w/DSP Limiter Pro/DJ, 15 inch (
Add serious low end to your gig with the Rockville Bass Gig RBG-15S powered subwoofer. This is an incredible sounding powered sub that features a 15" driver with up to 1600-watts of peak power for tremendous bass that can run all night without stopping. The subwoofer features a high temperature 4-layer 4 voice coil and is set in a 100oz magnet motor structure. We upgraded these from a 3" 70 oz magnet to 100 oz and 4". The sound quality was just so much better, that we had to make this upgrade. Most brands on the market have smaller coils and lighter magnets. They will not perform or sound as good as the RBG15S. The amplifier features an internal heat sink with a heat sensitive, variable speed, auto turn-on fan cooling system, so even when your music gets HOT ‐ your amp will stay cool. You can tailor your sound using the built-in DSP (Digital Signal Processor), which allows you to either add extended boost or extended low frequency enhancement. The DSP circuit also controls over-excursion, thermal, and clipping protection which will ensure you can pound your subs hours straight without any damage occurring. This sub is built to last for years and years of use. A 3 position Low Pass crossover filters out the highs to make your system sound its best whatever venue you're infer added convenience and easy set-up, the RBG15S units feature combo XLR ‐ &duo; TRS inputs with Level control and XLR thru puts to secondary units. Just connect your main mix outputs to the subwoofer, and then link your main speakers from the RBG15S! This sub features a heavy-duty pole-socket so you can mount your main speaker on top for easy setup and positioning and carry handles so you can easily transport it. Additional controls include a polarity switch, which allows you to invert the subwoofers polarity when installing the subwoofer away from the main speakers. This allows for near perfect time alignment of the subwoofer low-end frequencies to your main speakers.
- Rockville RBG15S 15" 1600 Watt Active Powered PA Subwoofer.
- 400 Watts RMS / 800 Watts Program / 1600 Watts Peak Power. 5" Woofer with 70oz Magnet and 3" Voice Coil.
- Frequency Response: (/-3dB) 29Hz - 150Hz. Maximum SPL @ 1w / 1m: 120dB Peak / 115dB Continuous.
- DSP Digital Signal Processor with Boost for Extended Low Frequency Control. Power-On and Signal Input LED Indicators.
- Signal Input LED Indicator. Clip Limiter Circuitry with LED Indicator. Balanced XLR TRS input jacks.
- Balanced XLR thru/output jacks for parallel connections. Passive heat sink with heat sensitive variable speed auto turn-on fan for cooling.
- Subwoofer Crossover 80Hz/100hz/120HZ Low Pass. Subwoofer Level Adjustment. Subwoofer Phase Control.
- Built-in pole mount socket. Built-in carrying handles. Custom metal grill. Durable black carpet with black metal corners.
- 7-layer Birch 5/8" plywood baffle construction. Aluminum former voice coils with copper winding.
- Dimensions: 23.25" x 20.75" x 19.75". Weight: 73Lbs.
- Fidget gadgets
- Gifts to get your best friend for her birthday
- Dinosaur gifts for toddlers
- Fingerless motorcycle gloves
- Cream to prevent stretch marks during pregnancy
- Cheap blender for green smoothies
- Rated cocktail shaker