BOSS Audio CH6CK Component Car Speakers - 350 Watts of Max Power and 175 Watts Per Set, Two 6.5 Inch Speakers/Crossovers/Tweeters, Full Range, 2 Way, Sold in Pairs, Easy Mounting
6-1/2-Inch Two-Way Component Speaker System
- CONE: Made From Polyurethane, The CH6CK 6.5 Inch Car Component Speakers Provide a Resilient And Durable Material That Can Offer Great Sound With The Advantage Of Long Lasting Speakers
- VOICE COIL: Our Voice Coils Are Able To Withstand High Temperatures Yet Maintain Its Strength And Fatigue Properties Giving Them The Advantage Of Longer Play Times With Lower Weights
- SURROUND: We Use Rubber In A Lot Of Our Speakers. It Has The Ability To Endure Much Punishment Without Any Sign Of Damage. It Compliments The Whole Structure Of The Speaker By Allowing Constant Abuse Where It Is Most Needed, Without The Wear And Tear
- TWEETER: A Piezoelectric Tweeter Is More Resistant To Overloads And Can Be Used Without A Crossover Due To Its' Electrical Property.
- WARRANTY: BOSS Audio Systems Provides a Powerful 3 Year Platinum Online Dealer Warranty So Long As The Purchase Is Made Through Amazon Dot Com
Sound Storm LOPRO10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles That Need Bass But Have Limited Space
Give your vehicle's audio system an upgrade with the SSL LoPro10 Class A/B 10"" Low Profile Amplified Subwoofer. This powerful Amplified Subwoofer features 1200 Watts Max Power with a MOSFET power supply to take your music to the next level. With High and Low Level Inputs it can be hooked up to just about any in-dash stereo. At a height of just 3"", it's perfect for fitting into tight spaces, including under the seat of many vehicles. Customize the sound with the Variable Low Pass Crossover, Bass Boost, Subsonic Filter, Phase Control and Remote Subwoofer Control. Gear up and get your music thumping with the Sound Storm LoPro10.
For further product details, please scroll down.
- BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
- LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
- VARIABLE BASS BOOST: Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it; RMS Power Handling: 600 Watts
- DIMENSIONS: 15.2 inches in Depth, 11.2 inches in Width and 2.8 inches in Height. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
- WARRANTY: BOSS Audio Systems provides a Powerful 3 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com
Pioneer A Series 6.5 320 Watts Max 3-Way Car Speakers Pair with Fiber Cone Midrange and 6-1/2 Multi-Fit Installation Adapters Included w/ FREE ALPHASONIK EARBUDS
Pioneer's next generation of TS-A series speakers offer improved bass and dynamic range, higher power handling and a new cosmetic design. The 6.5" A-Series 320-Watt 3-Way Speakers are designed to replace the vehicle's factory installed speakers and produce improved sound quality at exceptional value. The TS-A line includes a new highly rigid multilayer mica matrix cone structure for a wider dispersion of sound with deeper bass, and a new tweeter designed to deliver an improved range of mid to high frequencies and produce optimized sound at higher volumes.
- 320 Watts Max Power
- Multilayer Mica Matrix Cone Design for Optimum Sound Reproduction and Responsiveness
- Lightweight Elastic Polymer Surround
Pioneer DEH-150MP Car Audio CD MP3 Stereo Radio Player, Front Aux Input with JVC 6.5 Inch 2-WAY Car Audio Speaker (Black)
In-Dash AM/FM, CD, MP3 Receiver with Remote Single-line, multi-segmented LCD display with LED back light is 35 larger CEA-2006 compliant amplifier Power Output: Peak: 50 watts x 4 channels ; RMS: 14 watts x 4 channels. Theft-deterrent, detachable face plate with anti-dust design. Wireless remote control included. CD text information display MP3 ID3 Tag Display (Title/Artist/Album) 1-year Sonic Electronix Warranty Playback and Audio Features: Playback of CD, CD-R, CD-RW, MP3, WAV and WMA AM/FM tuner with 18FM/6AM presets. Advanced Sound Retriever for Compressed Audio Enhancement. Electronic Shock Protection (ESP) 5-band parametric equalizer with 7 selectable tone curves (5 Preset, 2 User) 24bit Digital Analog Converter (DAC) to enhance your MP3/WMA playback Built-in High-Pass and Low-Pass crossover filters Expandability Options: 1 Set of 2V preamp outputs (front and switchable rear/subwoofer) Front Auxiliary Input: 3.5 mm headphone jack allows connection to portable media devices such as MP3 players. Speaker Features: Pair of CSJ620 6.5" 2-Way Coaxial Speakers 300 Watts Peak Power/30 Watts RMS Frequency Response: 35-22,000 Hz Mica woofer cone Ferrite magnet Hybrid rubberized cloth surround Polyetherimide balanced tweeter Neodymium magnet (tweeter) Black ABS composite grills Top-Mount Depth: 1-23/32"
- App mode pandora radio app compatible
2-Way Custom Component Speaker System - 6.5 400 Watt Component with Electroplated Steel Basket, Butyl Rubber Surround & 40 Oz Magnet Structure - Wire Installation Hardware Set Included - Pyle PLG6C
Pyle Model : PLG6C
6.5'' 2-Way Component Speaker System
6.5'' 400 Watt 2-Way Custom Component System
Get in gear with the Pyle Gear series These speakers are designed to provide the best quality sound for the budget-minded enthusiast. You'll be blasting your tunes and rocking the block with this component speaker kit. It includes one pair of 6.5' mid-bass speakers, one pair of 0.5' tweeters, one pair of passive crossover devices, a wiring kit, grills, and installation hardware - it's a perfect way to upgrade and expand the range of your factory system. The mid-bass speakers pump with 400 watts of power and fit in most OEM locations. The 100-watt, 0.5' silk dome tweeters have three mounting options and a frequency response from 1.3 to 22 kHz. Use the passive crossover networks to separate the signal from your headunit between the mid-bass and tweeter speakers for a richer, more accurate sound. You'll hear everything you were meant to hear with Pyle Gear.
- 6.5" MID-BASS SPEAKERS: The 6.5-inch woofer features an eye-catching yellow color poly injection cone. Non-fatiguing butyl rubber surround keeps your speakers secure and ensures that the product will last for a long period of time
- HIGH-QUALITY SOUND: Listening to good music while on the road has never been this good. The component audio speaker has high-temperature ASV voice coil which provides the richest sound, ensuring low distortion and providing an open sound stage
- HEAVY DUTY COMPONENT: The 40 oz magnet structure, special electroplated steel basket, and 0.5" silk dome tweeter are what power these speakers and allow for a 90 Hz - 20 kHz frequency response. It features standard 6.5" size that fits OEM locations
- MULTIPLE MOUNTING OPTIONS: Allows 3 mounting options - flush, surface or angle. This 4 ohm component also features a mounting depth of 2.65", ensuring your speakers will stay in place
- WIRING KIT INCLUDED: This audio speaker compensates the undersized wire found in many of today's cars. Includes grills, wires and mounting hardware. Midrange tweeter helps to provide smooth & loud sound
- 400-watt 2-way custom component system includes pair of woofers, tweeters, and crossovers
- 6.5-inch woofers with yellow poly injection cones and butyl rubber surrounds
- 0.5-inch silk dome tweeters with neodymium magnets and multiple mounting options
- Pair of passive crossover networks with 12 dB/octave slope
- 50 Hz to 22 kHz overall frequency response
JBL GT7-6C 6.5" 2-Way GT7-Series Component Speaker System-Set of 2
6.5" 2-Way GT7-Series Component Speaker System. 4 ohms impedance. Frequency Response: 50-20,000 Hz. Top-mount Depth: 2 3/8". Sensitivity: 92dB. Grills included.
- 6.5" GT7 Series 2-Way Component Car Speakers
- Power Handling: Peak: 300 watts per pair / RMS: 100 watts per pair
- Polypropylene Plus One cone
- Foam surround
- 1-3/16" PEI edge driven dome tweeter
- Frequency Response50Hz - 20kHz
- Power Handling (Peak)150W
Dual Electronics BP1204 12 inch illumiNITE High Performance Studio Enclosed Car Subwoofers with 1,100 Watts of Peak Power
Dual Electronics BP1204 12 inch illumiNITE High Performance Studio Enclosed Subwoofers with 1,100 Watts of Peak Power is a force to be reckoned with. Your high performance subs were engineered specifically with you in mind. The specialized tuned port with computer aided design and 2.5 Voice Coils vastly increases output efficiency for your subwoofers providing you with consistent low sounding bass. Its computer-tuned acoustic chambers delivers up to 1,100 Watts of Peak Power, 600 Watts RMS at a 4 Ohm impedance and Frequency Range between 30Hz 200Hz for unmatched output efficiency that suffices even bass enthusiasts.
Your curved plexiglass viewing window and patent pending illumiNITE design is a showstopper by mesmerizing the senses with its intricate blue light display which allows for color coordinated installations. We designed your high performance subs to be installed easily by allowing accessible input terminal cups that connect to your amplifier in seconds. The built-in Ventilated Control Circuitry System helps keep your system cool during peak usage for maximum bass output and hours of nonstop music entertainment. Our engineers made sure that your BP1204 was built with sound MDF construction and a top grade in-line carpet that will eliminate the vast majority of enclosure movement for streamlined sound quality and unmatched sound superiority on the road.
The Brushed Aluminum injection molded and Low-Q optimized subwoofers with their 45-ounce magnets provide excellent sound control and are built to last.
Backed by our 1 Year Warranty that guarantees a hassle free experience with excellent customer service.
- INCREASED OUTPUT CAPABILITY - specialized tuned port with computer aided design and 2.5" Voice Coils vastly increases output efficiency for your subwoofers providing you with consistent low sounding bass
- DIGITALLY OPTIMIZED SUBWOOFERS - are carefully crafted for efficient and accurate bass, providing power handling up to 1100 Watts of Peak Power, 600 Watts RMS at a 4 Ohm impedance and Frequency Range between 30Hz - 200kHz for unrivaled sound superiority
- CURVED PLEXIGLASS VIEWING WINDOW - illumiNITE design with Brushed Aluminum subwoofer cones create a surreal viewing experience
- SOUND MDF CONSTRUCTION - and top grade in-line carpet eliminates the vast majority of enclosure movement for streamlined sound quality via both 12 inch subwoofers for unmatched sound superiority on the road
- 1 YEAR WARRANTY - guaranteed high quality and reliability with hassle-free parts and labor warranty with excellent customer service
- DIMENSIONS - 30" W X 14.4" D X 14.4" H. Built in crossovers for ease of installation
- while the Ventilated Control Circuitry System ensures system coolness during peak usage while delivering studio quality performance
MTX 12" 1200W Dual Loaded Car Audio Subwoofers with Box Enclosure Package
This is a complete package! Package includes, MTX loaded car subwoofer system with Mono amplifier and complete amplifier installation kit! The MTX TNE212D combines great subwoofer design with perfect enclosure design to deliver bass that far exceeds expectations. The unit is a dual 12" sealed enclosure that has a single terminal cup showing a final 2O load to any connected amplifier. The Terminator subwoofers used in the enclosure include polypropylene dustcaps that are durable allowing them to survive the rigors of most trunks and are lightweight allowing them to efficiently move using less power. Each subwoofer can handle 200 watts RMS power, resulting in a power level of 400 watts RMS/800 watts Peak for the entire enclosure. The subwoofers also incorporate Spider Plateau Venting, which is a mechanical cooling process that allows the subwoofer to continually refresh the air around the voice coil helping to dissipate the heat generated during extended play. The enclosure itself is made using extra strength 5/8" MDF (medium density fiberboard) which is the preferred material for subwoofer enclosures. Where other manufacturers only use a 1/2" board, the MTX 5/8" board is stronger ensuring that the enclosure can contain the massive low frequency sound waves generated by the subwoofers without problems. Thunder Bass, Hard hitting Dual 12 inch MTX subwoofers Designed For SPL, Rock your car and the neighborhood! Easy Installation, Mounts quickly in most trunks and SUVs We are an authorized MTX dealer!
- New MTX TNE212D 12" 1200W Car Subwoofer Enclosure
- 1200 Watt Max
- 400 Watt RMS
- Rubber Surround
GAMPRO Car Siren Horn,12V 80W 7 Tone Sound Car Siren Vehicle Horn with Mic PA Speaker System Emergency Sound Amplifier
Link of GAM-CSS-RVI: https://amzn.com/B01H1FX9MC
Link of GAM-KYQ-022: https://amzn.com/B017OYVL5M
Sound Sample of Gam-60-4C3 on YouTube: http://youtu.be/BtP1sfOH8Bs
GIFT: You may need to extend the wires while mounting this siren speaker. So EVERY CUSTOMER will get a FREE wire(about 5ft) and 6 Plastic zip ties as GIFTS
1. Color : black
2. Easy to install
3. 7 Siren sounds, Hooter/Ambulance/Traffic/Police/Fire alarm . etc
4. Powered by: vehicles' electricity - 12V Only
5. Microphone for PA system
6. Speaker is 18cm long and 11cm height
7. Input Current: 2.0-2.5A
8. 80W Speaker is about 130 decibels at full volume
1 X PA Mic
1 X Speaker
1 X Pack of installation kit
1 X Free wire
6 X Fixing straps
1 X Manual
1. This is not a replacement for professional equipment and should not be considered such.
2. It is not going to be as loud as 100 Sirens sold on the market.
3. Strictly for Non-Professional Use - This is not a professional product! The PA is not very loud on this - PA is the part where you would talk into.
4. Valued customer, please understand this product is designed for custom installation. It needs 12V Power delivered to 2 wires. You may have to extend the wire(included) between the speaker and the control module if you are mounting this in your engine bay. Considering the price, this product is a fantastic value, however please don't expect professional grade equipment at this price. Please check above installation guide before purchase. If you are installing this on your cigar plug in your vehicle, you may need to increase the fuse on your cigar outlet.
- 7 SIREN SOUNDS: GAMPRO car siren speaker can offer 7 loud and clear sounds, includes hooter, fire alarm, ambulance, traffic, police, etc. Please don't use siren when emergency situation happened.
- PA SYSTEM: GAMPRO car siren speaker are built in public-address system. You can talk to other people with this mic in your car. You can also have a joke with your friends, they will not know who is talking.
- Suitable for Any 12V Vehicle: GAMPRO car siren speaker can be installed in any vehicle with 12V DC Power. You can install it in Car, Truck, Jeep, RV, Boat, etc.
- MATERIAL: High quality ABS-plastic housing iron holder. PACKAGE INCLUDES: 1 x Speaker(with two 5.5ft wires ), 1 x PA mic, 1 x Manual, 1 x Pack of installation kit, 6 x Free plastic zip ties.
- 12-MONTH WARRANTY: Buy the GAMPRO car siren speaker without risk, if you have any problem with the product, just contact GAMPRO customer service, we will try our best to help you.
New BOSS CH6530 6.5" 300 Watt Boss CH4630 4x6" 250 Watt Car Audio Speakers
**Package Includes:** - 2 BOSS CH6530 3-Way Speakers - 2 BOSS CH4630 Speakers ---------------- These **BOSS CH6530** 6.5" 300W 3-Way CHAOS EXXTREME Car Audio Speakers can handle 300 Watts of MAX power per pair. The **Boss CH6530** speakers feature and aluminum voice coil, stamped steel basket, a poly-injection cone and a rubber surround. - 1" Polyimide Cone Midrange - Mounting Depth: 2.125" - Impedance: 4 ohms Each The **Boss CH4630** speakers each deliver 250 watts at max power, providing deep bass and loud crisp sound without any distortion. They each have 150 watts RMS power for loud clear audio, plus they have a mounting depth just over 1 1/2 inches. Each speaker features a red poly injected, 1 inch cone, with foam surrounding and a 1 inch, High-Temperature, Aluminum Voice coil. - Red poly-injection cone woofer - Butyl rubber surround - 1" Polyimide dome midrange !alt text1 1: http://www.vminnovations.com/sys/resource.ashx?guid=6088617e844b4420a69def16beba86bb @video(IqqQDZVcAYU)
- Brand New Boss CH6530 6.5" Boss CH4630 4x6" Car Speakers (Package)
- **Boss 6.5" Speakers:**
- Brand New Boss 6.5" 300 Watt 3-Way Speakers
- 300 Watt MAX
- Impedance: 4 ohms Each
- Face powder brand
- Drill wire brushes
- Fog lights for semi trucks
- Lightweight waterproof backpack
- Contour highlight stick
- What is the best shark vacuum
- Co2 detectors