Philips 9007 X-tremeVision Upgrade Headlight Bulb with up to 100 More Vision, 2 Pack
Boost your Vision with X-tremeVision! Philips X-tremeVision headlight bulbs offer up to 100 more vision (compared to a standard minimum legal requirements in low beam headlamp test results), for drivers who want to see farther. Based on a unique filament design and optimized geometry, X-tremeVision is engineered with state-of-the-art technology for ultimate performance and more light where it matters the most.
- Get up to 100 more vision on the road compared to a standard minimum legal requirements in low beam headlamp test results
- Choose Philips X-tremeVision headlights for maximum light output and ultimate performance
- Excellent for nighttime drivers and when often driving in rural areas or dimly lit streets
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Headlights dim over time.
- Headlight bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.
NIMTEK 50cc Scooter Carburetor GY6 Four Stroke with Jet Upgrades Scooter Moped ATV
Carburetor with accelerator pump for many 50cc GY6 4-stroke engines QMB139
Upgraded jets for better starting, idling and performance. 85 main, 32 pilot jet.
18mm ID (Intake side), 40mm OD air filter side
- Brand New High Quality Aftermarket Carburetor.
- Carburetor with accelerator pump for many 50cc GY6 4-stroke engines QMB139
- Upgraded jets for better starting, idling and performance. 85 main, 32 pilot jet.
- 18mm ID (Intake side), 40mm OD air filter side
(4WD Models Only) Approved Performance F16016 - Front & Rear Kit Performance Drilled/Slotted Brake Rotors and Carbon Fiber Pads
We make it easy to get all of the right parts the first time.
2004-2004 Ford F-150 Pickup 4WD New Model 6 Wheel Stud Models
2005-2008 Ford F-150 Pickup 4WD 6 Wheel Stud Models
2006-2008 Lincoln Mark LT 4WD 6 Wheel Stud Models
- Please verify that this fits your vehicle. The last image of this listing shows compatibility. If your vehicle is not listed(be sure that the fitment notes match) contact customer service before ordering.
- Complete Brake Job In Box Includes (2) Front Premium Performance Drilled & Slotted Disc Brake Rotors (2) Rear Premium Performance Drilled & Slotted Disc Brake Rotors (4) Front Premium Performance Carbon Fiber Ceramic Hybrid Disc Brake Pads (4) Rear Premium Performance Carbon Fiber Ceramic Hybrid Disc Brake Pads (2) Packets of Synthetic Moly Brake Grease.
- G3008 castings machined to O.E. specifications, and made to fit vehicle specific applications requiring NO modifications
- Cross Drilled holes promote air flow and help keep the brakes cool in aggressive driving conditions, while the slots continue past the rotors edge to disperse water and debris to guarantee smooth, quiet and consistent stopping power
- Approved Performance Carbon Fiber impregnated brake pads use CF3 technology, this formula uses no petroleum based adhesives to bond the friction material together which means that the dust created by normal braking will not stick to your wheels
BBR Tuning Billet Aluminum High Performance 2-Stroke Motorized Bicycle Engine Cylinder Head Gas Bike Racing Cylinder Head Upgrade
The BBR Tuning Billet Aluminium High Performance Head will give you performance without sacrificing style. Designed with billet aluminium , this head is made for performance engines as well as any non-performance engines. Built with a rounded and squared shape, this head cools your engine faster than standard heads while giving you 20-30 more power to your engine. This head might look small, but it packs a punch better than those round heads and most "ashtray" cylinder caps. If your engine wants more power, give it the BBR Tuning Billet Aluminium High Performance Head and you'll feel a big difference when you hit the throttle.
Designed for 66/80cc bicycle engine kits. Will fit on most engines including, Flying Horse, Mega Motors, Grubee, Stinger, and more!
- BOOSTS PERFORMANCE: The BBR Tuning Billet Aluminum High Performance Cylinder head cap will boost your power from 20-30 from stock. It's hemispherical dome raises your engines compression and ensure evenly distributed combustion resulting in a large explosion and better utilization of fuel.
- INCREASED COOLING: This cylinder head features extra large heat sinks constructed of aircraft grade aluminum which dissipates heat more evenly and cools your cylinder up to 50 better than stock. Not only do you get better performance and cooling from this cylinder, it also makes your bike look great with its shiny billet aluminum and stylish machining.
- EASY INSTALLATION: Installation is a breeze: simple remove your stock head cap, replace your head gasket, install your new head, torque down your head cap, and you're ready to ride
- UNIVERSAL FIT: Designed to work with most 66cc and 80cc 2-Stroke motorized bicycle engines.
- PACKAGE INCLUDES: 1x BBR Tuning Billet Aluminum High Performance 2-Stroke Motorized Bicycle Cylinder Head
Glixal ATMT1-008 Performance Big Bore Cylinder Kit GY6 80cc 47mm for 139QMB ATV Scooter Moped Go Kart
1.Brand New Products with High Quality
2.Upgrade 47mm 80cc Cylinder Kit for GY6 50cc Engine
3.This Parts Fit Most of Chinese Made Scooters and ATVs.Such as JONWAY,JMSTAR,ROKETA,SUNL,TANK,PEACE,TAOTAO
- 1.Inner Diameter of Cylinder: 47mm
- 2.Outer Diameter of Piston Pin: 13mm
- 3.High Quality Durable Piston Rings
- 4.Include Cylinder,Piston,Piston Ring,Piston Pin,Piston Pin Clip,Valve Oil Seal,Gaskets,Tensioner Gasket,Exhaust Gasket,Intake&Exhaust Studs,Exhaust Nut
- 5. High Performance Upgrade 47mm Cylinder Rebuild Kit for GY6 49cc 50cc 60cc 80cc engine
Traverse Ridge Racing Tesla Model 3 Performance Upgrade Wheel Adapter/Spacer for Aftermarket Wheels (Set of 4)
Do you want new wheels on your Model 3 with Performance Upgrade?
If you have done your research you know that your options are limited. Our custom made wheel spacers or hub adapters are made specifically for Model 3 Performance, allowing you to use any aftermarket wheel (although we are a bit partial to our unique True Turbine wheel found in our other listings...
See our product pics for detailed information on how the wheel spacers / hub adapters work and why you need them.
Due to the unique ridge found at the back of the hub on the Model 3 with the performance upgrade (equipped with red brake calipers), this wheel spacer / hub adapter is required or aftermarket wheels will not seat properly against the rotor housing, causing a very unsafe situation. The spacer was machined to fit around the larger portion of the hub (or ridge) and essentially eliminates it. When installed, the spacer gets sandwiched between the back of the wheel and the rotor housing, ensuring that your wheels fit tightly and squarely on your car. DO NOT attempt to mount our wheels or any other aftermarket wheels without the spacer, unless the wheels were specifically machined to account for the 3mm ridge on the hub.
LISTING IS FOR A SET OF FOUR (4) ADAPTERS / SPACERS
PLEASE NOTE: Wheel spacers are prohibited in a few states and some tire shops will not be willing to install them for you. Check with your local installers before ordering. Traverse Ridge Racing, LLC will not assume responsibility for the use or misuse of these wheel spacers.
- Set of four (4) hub adapters / wheel spacers
- Required on Model 3 Performance for aftermarket wheels
SYLVANIA - 9003 (HB2, H4) SilverStar zXe High Performance Halogen Headlight Bulb - Headlight & Fog Light, Bright White Light Output, HID Attitude, Xenon Fueled Technology (Contains 2 Bulbs)
SYLVANIA SilverStar zXe headlights are the newest halogen bulbs on the scene. Looking for the whitest, most stylized light for your vehicle? Our SilverStar zXe headlights are the whitest in our SilverStar high performance series. Style and performance in a single package.
BBR Tuning High Performance 2-Stroke Motorized Bicycle Super Magneto Upgrade Gas Powered Bike Electrical Ignition Upgrade
Tired of getting a weak, inconsistent spark? With the BBR Tuning High Performance 2-stroke Super Magneto your spark issues are soon a thing of the past. More powerful than your stock magneto, the Super Magneto will make sure the spark you get is strong and your CDI keeps getting that spark more consistently than ever. The magneto is the power source for your motor. While your stock magneto will work just fine on your 2-stroke bicycle, the BBR Tuning High Performance 2-stroke Super Magneto is wrapped with extra coiling to make sure your motor's got all the power it needs to start faster and run better than before. Could this magneto with a high performance CDI and you're looking at a motor that's ready to tear up the track. Don't worry, this magneto's as simple to install as ever: simply take off your magneto cover, remove the mounting screws and magneto from your motor, replace it with this Super Magneto, fasten, cover, wire black to black and red to blue, and you're ready to ride! So when you need a stronger spark, faster starts, a more consistent power to the rest of your engine, the BBR Tuning High Performance 2-stroke Super Magneto is the 2-stroke magneto you've been waiting for. Compatible with 2-stroke 48cc and 66/80cc 2-stroke bicycle engine kits
- BOOSTS SPARK: Tired of getting a weak, inconsistent spark? With the BBR Tuning High Performance 2-stroke Super Magneto your spark issues are soon a thing of the past. More powerful than your stock magneto, the Super Magneto will make sure the spark you get is strong and your CDI keeps getting that spark more consistently than ever.
- RELIABLE PERFORMANCE: While your stock magneto will work just fine on your 2-stroke bicycle, the BBR Tuning High Performance 2-stroke Super Magneto is wrapped with extra coiling to make sure your motor's got all the power it needs to start faster and run better than before
- EASY INSTALLATION: Don't worry, this magneto's as simple to install as ever: simply take off your magneto cover, remove the mounting screws and magneto from your motor, replace it with this Super Magneto, fasten, cover, wire black to black and red to blue, and you're ready to ride
- CONSISTENT POWER: So when you need a stronger spark, faster starts, a more consistent power to the rest of your engine, the BBR Tuning High Performance 2-stroke Super Magneto is the 2-stroke magneto you've been waiting for
- UNIVERSAL FIT: Compatible with most 48cc, 60cc, 66cc and 80cc 2-stroke bicycle engine kits
Powerstroke 7.3L GTP38 Turbo Bigger 66/88mm Billet Compressor Wheel DIY Upgrade Rebuild Kit
This is a GTP38 turbo upgrade kit with 66/88mm billet compressor wheel for performance use of 99.05-2003 Ford E&F Series Super Duty Pickups.
The compressor wheel is not only intended for anti-surge purpose, but also support huge power gains, with the expanded wheel size and aggressive blade design, it can provide 33 more airflow than factory 60/80mm cast compressor wheel to let your car more powerful.
Because of the bigger compressor wheel, the compressor housing has a 4" ported anti-surge inlet(the stock one is 3"), so we put a new 4" to 4" intake hose to fit that size.
The Thrust bearing in this kit is upgraded from stock 270 to 360 thrust bearing, which is very necessary for high boost and performance applications, not only because of the full circle lubrication, but also the more and better designed oil feed holes.
The Upgraded stepped gap piston ring also eliminates the oil leaking problem.
- You will get the following things from this kit:
- One Billet Compressor Wheel
- One Repair Kit
- One Compressor Housing&Backing Plate
- One Intake Hose with Clamp
Note: Professional Installation is highly Recommended.
Rebalance your core before install it.
- Upgrade 66/88mm Billet Compressor Wheel provides 33 more Airflow than stock 60/80mm wheel and solves the commen Surge Problem
- Upgrade from Stock 270 to 360 Thrust Bearing System for better Lubrication.
- Stepped Gap Piston Ring to eliminate the Problem of oil leaking.
- Bigger Compressor Housing with 4" Intake Hose, Easy Installation
- Perfect Upgrade Kit for 99.5-03 Powerstroke 7.3 Turbo
K&N 57-1514-1 Performance Air Intake System for Jeep Wrangler 4.0 L6 TJ 1997 - 2006
The 57 Series Generation II air intake, also referred to as an FIPK, is K&N's ultimate performance product. These performance intakes are designed to increase power by as much as 10. 57 Series FIPK's are CARB exempt, street legal in all 50 US states, come with K&N's Million Mile Limited Warranty and are guaranteed to increase power. K&N air intake systems replace your vehicle's restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This translates into more power and torque for your vehicle. The air filters on these kits are washable and reusable. Most of our air intake systems are easy to install using tools commonly available (see installation instructions).
- Estimated horsepower gain of 12.13 HP at 4623 RPM
- Designed to improve throttle response and engine sound
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- Replaces entire factory air intake system
- Easy to install, usually in 90 minutes or less
- Fastest cordless drill
- Dustbuster to buy
- Mac eyeshadows for dark skin
- Hood vent for kitchen
- Tangle free earbuds with mic
- Cordless electric leaf blower
- Boys swimwear