Small milling machine

Proxxon 37110 Micro Mill MF 70

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

MICRO Mill MF 70

Buy small milling machine from Amazon.com
  • Variable speed 5000-20000-Rpm with 1/8HP (100-Watts) motor; 110 to 120-Volt AC, 60 HZ
  • Table size 7-7/8-Inch by 2-3/4-Inch (200 by 700mm)
  • With X-Y travel, 5-17/64-Inch and 1-13/16-Inch vertical travel 2-3/4-Inch
  • 57/64 by 8-55/64-Inch (130 by 225 millimeter) weighs 15.5-Pound
Buy small milling machine from Amazon.com


Klutch Mini Milling Machine - 110V, 350 Watts, 3/4 HP

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

This Klutch Mini Milling Machine is a cast iron milling machine that runs vibration free for smooth operation. The 3/4 HP, 110V variable-speed motor with a 2-speed gearbox delivers 350 Watt power. Milling head and column tilts to 45 left or right for added versatility. Worktable L x W in. 3 5/8 x 15 3/8, Drilling Capacity in. 1/2, Dimensions L x W x H in. 20 1/2 x 20 1/16 x 29 15/16, Volts 110, Speed RPM Variable, Stand Included No, Light Included No, 360 Head Swivel No, HP 3/4, Chuck Size in. 1/2. 3 5/8in. x 15 3/8in. work table with 8 5/8in. longitudinal travel and 4in. cross travel 7in. headstock travel Coarse down feed control for drilling Fine down feed control for accurate tool height setting 1/2in. drilling capacity, 5/8in. end mill capacity and 1 3/16in. face mill capacity R8 spindle taper Delivers 100-2,500 RPM


Buy small milling machine from Amazon.com


WEN 33013 4.5A Variable Speed Single Phase Compact Benchtop Milling Machine with R8 Taper

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Remember when you could remove material evenly and precisely? Machine perfect channels and grooves into metal, wood, plastic and more with the WEN 4.5A Variable Speed Single Phase Compact Milling Machine. This versatile 13-inch swing tool helps machinists and woodworkers alike create flat surfaces, straight holes, angled edges, slots, pockets, surface contours and more. The R8 Taper allows for compatibility with a wide variety of cutters, mills, and bits, providing users a 1/2-inch drilling capacity, a 5/8 inch end mill capacity, and a 1-1/8 inch face mill capacity. Bevel the cutter head and column 45 degrees to either the left or the right. Variable speed operation goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting to meet the needs of a wide range of material types. Our compact yet powerful design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print. Move up to 11-13/16 inches along the X-axis, 5-1/8 inches along the Y-axis, and 7 inches along the Z-axis with tooled ruler markings around each hand wheel for precise and accurate cuts. Our benchtop design gives users a sturdy and reliable heavy-duty base with pre-drilled bolt holes for increased stability. A rubber cover runs from the table to the column to help catch chips and minimize clean-up. The included transparent shield combined with the emergency stop feature provide maximum user safety during operation. And, because its a WEN product, your milling machine comes backed by a two-year warranty, a nationwide network of skilled service technicians, and a robust inventory of replacement parts all to make sure you remember WEN.

Buy small milling machine from Amazon.com
  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty





Buy small milling machine from Amazon.com


Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Your Satisfaction is our Highest Priority, contact us firstly if you have any question

Miniature precision multifunction Milling Machine Bench drill Vise Fixture worktable X Y-axis adjustment Coordinate table

Feature:

Type : BG6300 working table

T solt : have three t solts

Solt size: 15mmx8mmx6mm

X axis travel : 200mm

Y axis travel : 50mm

Distance between grooves : 34mm

Working table size : 310mmx90mm

Height : 80mm (including two working clamp)

Mounting hole distance : two holes 93mm away from the nearest is the middle is 98mm,the distance is 112mm

Zero adjustment handwheel rotates a circle : 1.25mm.one lattice equal is 0.05mm

Apple to : Mini drill and drill bracket series and other suitable machine

Package include:

1 X BG6300 Milling Working Table

Buy small milling machine from Amazon.com
  • The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
  • The work table is composed of several adjustable dovetail slotaluminum alloy composition, can guarantee the minimumspace and ensure the accuracy
  • The working table comes with three T shaped groove, standard size is 15x8x6mm.
  • X¬†axis travel¬†:¬†200mm,Y¬†axis travel¬†:¬†50mm, Distance between grooves¬†:¬†34mm
  • Working table size¬†:¬†310mmx90mm, Height :¬†80mm (including two working clamp)






Buy small milling machine from Amazon.com


KKmoon Mini Metal Lathe DIY 6 in 1 Multi-functional Motorized Transformer Multipurpose Machine Jigsaw Grinder Driller Plastic Wood Lathe Drilling Sanding Turning Milling Sawing Machine Tool Kit

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Specifications:
Material: Aluminum Alloy ABS
Color: Black Red
Power: 48W
Motor Speed: 20000rpm
Plug Type: US Plug
Voltage: 100-240V 50/60Hz
Output: 12V 4A
Can Assemble Machine: Jigsaw, Grinder, Driller, Wood Lathe, Metal Lathe, Miller
6-in-1 Functions: Drilling, Sanding, Turning Lathe, Milling, Sawing, Wood Turning Lathe
Can Process Objects: Wood, Plastics, Soft Metal(Gold, Silver, Copper, Aluminium, etc.) Acrylic, PCB, etc.

Technique Data of Jigsaw:
Operating Space: 90 * 90mm / 3.54 * 3.54in
Maximum Cutting Saw Depth: 4mm Hardwood, 7mm Triply Wood, 18mm Softwood, 0.5mm Aluminium Flakes, 2mm Organic Glass

Technique Data of Grinder:
Operating Space: 120 * 100mm / 4.72 * 3.94in
Grinding Materials: Wood, Plastics, Soft Metal(Gold, Silver, Copper, Aluminium, etc.)

Technique Data of Driller:
Operating Space: 120 * 100mm / 4.72 * 3.94in
Slide Stroke: 30-50mm
Collets Size: 1-6mm 
Clamping Size of Vice Clamp: 0-35mm

Technique Data of Wood Lathe:
Maximum Processing Diameter: 45mm  
Processing Length: 135mm
Grinding Materials: Wood, Plastics


Technique Data of Metal Lathe:
Maximum Processing Diameter: 45mm  
Processing Length: 135mm
Grinding Materials: Soft Metal(Gold, Silver, Copper, Aluminium, etc.)

Technique Data of Miller:
Slide Stroke: 30-50mm
Collets Size: 1-6mm 
Clamping Size of Vice Clamp: 0-35mm
Grinding Materials: Wood, Plastics, Soft Metal(Gold, Silver, Copper, Aluminium, etc.)

Buy small milling machine from Amazon.com
  • Mini 6 in 1 lathe machine for DIY assembly of sawing machine, grinder, driller, wood lathe, metal lathe, miller.
  • Great handcraft tool kit for DIY, hobby, model making, crafts, students, small parts processing, etc.
  • Made of advanced aluminum alloy, durable and non-deformable for usage.
  • Come with a pair of protective glasses to protect your eyes when operating the machine.
  • 1 X Sawing Machine Base Bracket, 1 X Grinder Protection Cover, 2 X Right-angle Fixed Plate, 1 X Big Belt Cover Block, 8 X Copper 1-6mm Collets, 1 X Working Accessories, 1 X Driller Rocker Arm, 1 X Power Transformer, 1 X Short Machine Bed, 1 X Long Machine Bed, 1 X Abrasive Disc, 1 X Counter Shaft, 2 X Small Slider, 1 X 3-Jaw Chuck, 1 X Plain Vice, 1 X Big Slider, 1 X Tail Stock, 3 X Bracket¬†, 1 X Motor¬†,
Buy small milling machine from Amazon.com


JET JMD-18 350018 230-Volt 1 Phase Milling/Drilling Machine

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Milling/drilling machine has a 1-pc. cast iron column for added support, extra-large work table, positive quick-stop knob and easy-to-read internal depth gauge. Belt cover has quick-slide latch for faster belt adjustment to change spindle speeds. Heavy-duty tapered roller bearings support spindle for greater tolerance and more accurate drilling depth. Speed (RPM): 150-3,000, Volts: 115, Drilling Capacity (in.): 1 1/4, Speeds (qty.): 12, HP: 2, Chuck Size (in.): 1/2, Light Included: Yes, Draw Bar: Yes, Max. Spindle Distance (in.): 18, 360deg Head Swivel: Yes, Dimensions L x W x H (in.): 42 1/2 x 39 3/4 x 43 1/2

Buy small milling machine from Amazon.com
  • Hinged belt cover allows faster speed changing
  • 9-1/2-by-31-3/4-inch worktable
  • 2 hp, 1 phase, 230-volt only motor
  • Heavy-duty tapered roller bearins support the spindle
  • Stand not included


Buy small milling machine from Amazon.com


Lukcase Multifunction Worktable Milling Working Table Milling Machine Compound Drilling Slide Table For Bench Drill (Heavy-Sized)

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:


The table is suitable for Mini Drill and drill bracket series.
It can also apply to other suitable machine.
The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy
Table size: 365 200 mm. Weight: 6.8 kg
X axis distance is 350 mm. Y axis distance is 100 mm.
Hand Wheel Scale Per Ring is 3 mm.

Package includes:
1 Pc of Milling table of Heavy Version

Buy small milling machine from Amazon.com
  • The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine.
  • It can also apply to other suitable machine. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
  • Table size: 365 200 mm. Weight: 6.8 kg
  • X axis distance is 350 mm. Y axis distance is 100 mm. Hand Wheel Scale Per Ring is 3 mm.





Buy small milling machine from Amazon.com


3018 GRBL control DIY mini CNC Carving Milling Engraving machine working area 30x18x4.5cm 3 Axis Pcb Milling machine,Wood Router, v2.5

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Package include:
1set GBRL 3018 CNC Laser machine kit (without laser)
10 x 200.1mm drill bits
1 Set of allen wrench

1. Specification:
1.Working area : 30x18x4.5cm
2.Frame size: 40x33x24cm
3.Screw: Professional T8 screw, lead 4mm, double copper nuts eliminate the poor back
4.Stepper motor: 42 stepper motor
5.Voltage: 12V, phase current 1.3A, phase resistance 2.1 ohms, torque 0.25N.m
6.Spindle: 775 spindle motor (12-36V) 24V: 7000r / min, 36V: 9000r / min
7.Power: 24V 5.6A power adapter (input voltage 110-240V), simple and convenient
8. Gray Part Material: Plastic
9. Control software: Grbl Controller
10.Design software: All CAM (computer aided manufacturing) software can be
11.System requirements: windows XP SP3, win7. (32/64 can be). Linux
12.Interface: USB
13.Drill bits: tip 0.1mm ,20 degree , diameter 3.175mm
Lead screw with T8 trapezoidal lead. Double-headed lead 4mm, double nut spring back to eliminate poor

2. GRBL 0.9J,USB port cnc engraving machine control board, 3 axis control
Connection: USB (USB-CH340)
Software: GRBL controller,UniversalGcodeSender
Input voltage: 12-36V
Master chip: atmel 328P
(arduino nano)Stepper motor driver: A4988
Spindle drive chip: MOSFET (recommendation 1236V, current : within 10A )
Spindle PWM speed: Support
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)
Laser engraving: Support
Power Interface: 5.5-2.5mm DC interface

Main application:Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.

the user manual: https://drive.google.com/file/d/1Qua1m_1CxpIbmIHWSkUq-nkOLF1A_jV8/view?usp=sharing

Buy small milling machine from Amazon.com
  • Purchase 3018 milling engraving machine can get free the power supply
  • The machine for a full set of spare parts, shall be installed by the buyers,the package include the CD , with detailed user manual and free software,buyers don't need to worry about machine Assembly
  • We suggest cnc-based buyers to buy,This machine is not industrial grade level
  • Body used profiles and plastic, small size, light weight, USB interface, GRBL control system, learning, entry preferred. Can use carving knife, but also can use laser engraving.
  • this machine can be added laser head , Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.








Buy small milling machine from Amazon.com


MultifunctionWorktable Milling Working Cross Table Milling Machine Compound Drilling Slide Table For Bench Drill Adjustme X-Y (6350 SIZE)

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

Get the most value for your money with Milling Working Table !
The miniature precision multifunction Milling Machine Bench drill Fixture worktable X Y-axis adjustment working table 6350,
which can be applied to mini drill and drill bracket series or other suitable machines.
6350 is upgraded version of 6330,The base replace aluminum to iron .And the size ,weight is much more than 6300.
Specification:
X axis travel : 180mm
Y axis travel : 50mm
Distance between grooves : 34mm
Working table size : 350mmx100mm
Hand wheel with adjustable scale:A ring=3mm,
Package include:
1 * 6350 Milling Working Table , 1* accessories box, 1* manual

Buy small milling machine from Amazon.com
  • Mini multifunctional working table 6350,The table is suitable for mini drill and drill bracket series. It can also be applied to other suitable machines.
  • The work table is composed of several adjustable dovetail slot aluminum alloy composition, can guarantee the minimum space and ensure the accuracy.
  • Table size: 350 100 mm. Weight: 6.8 kg
  • Adjustment in X direction: 180 mm. Adjustment in Y direction: 50 mmDistance between grooves : 34mm
  • Hand wheel with adjustable scale: A ring = 3 mm.





Buy small milling machine from Amazon.com


Grizzly G0705 - Mill/Drill with Stand 29" x 8" Table

Buy small milling machine
Check Price on Amazon
Buy small milling machine from Amazon.com

Description:

This heavy-duty Mill/Drill has a 2 HP motor and enough table space to make quick work of just about any machining job you can throw at it. Priced so competitively compared to other brands you can use the savings for the G1076 1/2" Clamping Kit or even our G7155 6" machining vise. Of course with the R-8 spindle tooling up is a snap and with the cabinet in the stand you'll have the convenience of storing everything right where you need it most. Features: Fine down feed is engaged by clutch-type mechanism Easy-to-use depth stop Heavy-duty 12-speed tapered roller bearing spindle Forward/Reversing switch with emergency stop Stand with chip tray and cabinet Specifications: Motor: 2 HP 110V/220V single-phase Spindle taper: R-8 Spindle travel: 4-11/16" Swing: 15-1/2" Max. distance spindle to table: 17-5/16" Column size: 4-1/2" Collars calibrated: 0.002" T-Slots: 3 @ 2-1/2" centers 5/8" wide Table size: 8-1/4" x 28-3/4" Table travel : 19-11/16" Table travel : 7-1/2" Drilling capacity: 1-3/16" Number of speeds: 12 Range of speeds: 140 219 263 317 413 475 819 1075 1238 1450 1770 2436 RPM Approximate shipping weight: 750-Pound.

Buy small milling machine from Amazon.com
  • This heavy-duty Mill/Drill has a 2 HP motor and enough table space to make quick work of just about any machining job you can throw at it
  • Priced so competitively compared to other brands you can use the savings for the G1076 1/2-Inch
  • Distance spindle to table: 17-5/16-Inch Column size: 4-1/2-Inch Collars calibrated: 0
Buy small milling machine from Amazon.com


Small milling machine