Knee mill

OTMT Belt Drive Mill/Drill Machine - Model: OT25020

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

This small mill/drill will get you big results. It comes with an R8 spindle just like the big knee mills. It has a work table of 6.3" x 20.47" for milling. For expanded functionality, the mill/drill comes with two types of feeds. It has a coarse feed for effective drilling and a fine feed that is ideal for milling or boring. It also has a reverse function so you can tap holes. The 110 Volt, 3/4 HP motor effectively handles many types of jobs. Table DimensionsDecimal Inch 20.47" x 6.30" (520mm x 160mm). Distance From Spindle Nose To Table: 17.13" (435mm). Drilling Capacity_Decimal Inch: 0.78" (20mm). End Milling Capacity: 0.78" (20mm). Face Milling Capacity: 2.48" (63mm). Includes: Drawbar, Drill chuck and arbor, Wrench. Minimum Distance From Spindle Axis Top Column: 7.15" (181.5mm). Swivel Angle Of Headstock: 360.

Buy knee mill from Amazon.com
  • R8 spindle taper.
  • Pre-wired for worklight.
  • Great for a variety of drilling, face milling and end milling applications
  • T Slot: 0.64"
  • Speed Range: 1202,640 RPM






Buy knee mill from Amazon.com


Happybuy Power Feed X-Axis 150 Lbs Torque 0-200 RPM Power Table for Bridgeport Type Milling Machines

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Power Feed X-Axis 150 Lbs Torque 0-200 RPM Power Table for Bridgeport Type Milling Machines

Our Brand New AS-250-150 X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8" Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Feature

X-axis power feed for Bridgeport type milling machines

Reversible and auto shut-off at end of cut

150 Lbs. torque

Variable speeds

Longer lifespan

Effortless operation

Limit switch for sensitive stop

No loss of dial or hand crank

Noiseless direction changes

Better surface smoothness

Small volume and easy installation

Excellent speed control in the entire range

Power table feed won't vibrate or strain in low speed

Direction control knob for easy and rapid operation

Safety feature to protect transmission gear and electronic components

Specifications

Type: X-axis

Model: AS-250-150

Voltage: 110 V, 60 Hz

Torque: 150 lbs

Rotate speed: 0-200 rpm

Package size

Length: 33 cm (13 inch)

Width: 20 cm (7.9 inch)

Height: 18 cm (7 inch)

Gross weight: 6.5 kg(14.3 lb)

Package Content

1 x AS-250-150 X-Axis Power Feed for Milling Machine

1 x Set of Necessary Accessories

1 x Product Manual

Buy knee mill from Amazon.com
  • Type: X-axis; Torque: 150 LBS; Voltage: 110 V
  • Small volume and easy installation,noiseless direction changes
  • Power table feed won't vibrate or strain in low speed
  • Direction control knob for easy and rapid operation
  • Safe design helps to protect transmission gear and electronic components; two gears of this power table feed will not mesh and wear at the same spot, maximizing durability and longevity







Buy knee mill from Amazon.com


PM-935TS 9"x35" HIGH PRECISION Knee Type Milling Machine, Made in Taiwan,

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Specifications: Spindle Taper: R-8 Diameter of Quill: 3-3/8 Number of Spindle Speeds: Range of Spindle Speeds (RPM): 90-2720 Spindle Travel (in): 5 Collet Capacity: R8 Head Movement: 90 degrees R&L, Forward and back, Max Travel of Ram (in): 12-" Max Distance Spindle to Table (in): 17 Max Distance Spindle to Column (in): 15-3/4 Max Longitudinal Table Travel (in): 24" Max Cross Table Travel (in): 12" Max Knee Table Travel (in): 16 Size of Table: 9 x 35 Number of T-Slots: 3 T-Slots Size (in): 5/8 x7-7/8 x 35-3/4 T-Slot Centers (in): 2-1/2 Motor (TEFC): 3 Ph 230V 3 Phase Operation Floor Space Required (L x W x H/in): 55 x 48 x 78 High" Net Weight (lbs.): 1544 lbs

Buy knee mill from Amazon.com
  • VERY HIGH PRECISION MACHINE
  • MADE IN TAIWAN
  • HIGHEST QUALITY MACHINE OUT THERE
  • 5 YEAR WARRANTY


Buy knee mill from Amazon.com


NEW Replacement Bridgeport Polished Chrome Knee Crank complete with Chrome revolving spinner

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

With revolving chrome plated steel handle. Bridgeport Milling Machine Knee Crank Handle. Fits Bridgeport series #1 and clones. Scroll down for comments on this crank. A A A fit Bridgeport well",

Buy knee mill from Amazon.com
  • Replacement Bridgeport Polished Chrome Knee Crank complete with Chrome revolving spinner

Buy knee mill from Amazon.com


SHZOND Power Table Feed X-Axis 150 LBS Torque Power Feed 200 RPM Adjustable Rotate Speed for Bridgeport and Similar Vertical Milling Machine (X-Axis Torque 150LBS)

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Power Table Feed X-Axis 150 LBS Torque Power Feed 200 RPM Adjustable Rotate Speed for Bridgeport and Similar Vertical Milling Machine

The power table feed kit is for bridgeport and similar knee type milling machines. These will fit almost any vertical knee type mill out there with the 5/8" shaft end, Including but not limited to Bridgeport,Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc.

Item Parameter

Power Table Feed Voltage: 110V, 60Hz,90W

Type: X-axis

Rotate speed: 0-200 RPM

Torque: 150 LBS

Features

Small volume and easy installation

Excellent speed control in the entire range

Power table feed won't vibrate or strain in low speed

Direction control knob for easy and rapid operation

Safety feature to protect transmission gear and electronic components

Maintenance

1. Gear cover must be open every 6 month to check whether lubrication for spiral gear is sufficient. Graphite type lubrication is suggested rather than silicon type.

2. Carbon brush cap should be open every 6 month to check if the brush has wore out. Brush should be replace immediately if its length is under 0.2inch (front and back brush should be replaced together).

Package Content

AS-250-150 X-Axis power feed for milling machine x 1

Set of necessary accessories x 1

Product manual x 1

Buy knee mill from Amazon.com
  • Power Table Feed Voltage: 110V, 60Hz.Type: X-axis.Model: AS-250-150
  • Power Feed rotate speed: 0-200 RPM.Adjustable speed.Torque: 150 LBS
  • Excellent speed control in the entire range.The speed can be adjust according to operator's requirement
  • Power table feed won't vibrate or strain in low speed.Direction control knob for easy and rapid operation
  • The power feed kit is for bridgeport and similar knee type milling machines. These will fit almost any vertical knee type mill out there with the 5/8" shaft end







Buy knee mill from Amazon.com


1/2" Shank Knee Feed Adapter for Power Drill (3129-0015)

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Works with 1/2" power drill speeds up quill (knee) operation function as a power feed Fits most mill with 5/8" diameter hub Heavy duty made, hardened steel Flats cut on shaft for stronger power drill grip.

Buy knee mill from Amazon.com
  • .630 ID. Suitable for shafts with 9 splines.
  • Works with 1/2" power drill. Speeds up quill (knee) function as a power feed.
  • Fits most mills with 5/8" diameter hubs. Heavy duty.
  • Made of hardened steel.
  • Flats cut on shaft for stronger power drill grip.


Buy knee mill from Amazon.com


Mophorn Power Feed Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill Fits Bridgeport Acer (450 in-lb X-Axis Torque)

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Al-310S X-Axis Torque 450 in-lb Power Feed Milling Machine 200PRM Power Table Feed Mill

AL-310S X-Axis Power Feed Kit is for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8" Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First...etc. The gear ratio between transmission plastic gear and motor shaft gear is not a whole number. The two gears will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.

Feature

Type: X traverse

Model: Al-310S

Voltage: 110V, 50/60Hz

Rotate speed: 0-200 RPM

Max torque: 450 in-lb

Max feed rate: 650mm/min

Max return speed: 850mm/min

Effortless operation

Noiseless direction changes

Better surface smoothness

Small volume and easy installation

Excellent speed control in the entire range

Power table feed won't vibrate or strain in low speed

Direction control knob for easy and rapid operation

Safety feature to protect transmission gear and electronic components

Warning

1. To stop jog operating, you must first turn "FEED KNOB" to "0"(OFF) position. Then move "JOG SWITCH" to "FEED" position.

2. Be sure to follow the procedure for jog operation to avoid any damage caused by wrong movement.

Package Content

1 x Power Feed For Milling Machine

8 x Adjustable Pad

2 x Tiavel Stop Assembly

1 x Adapter

1 x Bevel Gear

1 x Dial Nut

1 x Locking Nut

1 x Product Manual

Buy knee mill from Amazon.com
  • Model: Al-310S; Type: X traverse; Voltage: 110V, 50/60Hz
  • Rotate speed: 0-200 RPM; Max torque: 450 in-lb; Max feed rate: 650mm/min; Max return speed: 850mm/min
  • Small volume and easy installation power feed, jog function operates at any feed speed; Excellent speed control in the entire range
  • Noiseless direction changes, better surface smoothness and power table feed won't vibrate or strain in low speed
  • Safety feature to protect transmission gear and electronic components, as to meet the requirements of ergonomics.The two gears of this power table feed will not mesh and wear at the same spot, this not only increases durability and longevity but even reduces noise over time.








Buy knee mill from Amazon.com


iMeshbean X Axis Power Feed Milling Machine Fits Bridgeport/Other Knee Type Mill Combo Kit

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Specifications:

Size: 74mm x 87mm x 26.8mm

Color: White

Power: AC 110V  50/60Hz

Speed Range: 0-120rpm

Max.Speed: 160rpm

Torque: 15.5Nm

Noise: <68dB

Buy knee mill from Amazon.com
  • This set includes everything you should need to install this power feed, including the power feed unit, table mounting bracket, drive gear, shims, safety stop, and hardware.
  • These use 110V, Single Phase Power, just a standard 110/120V outlet is needed.
  • New X Axis Power Feed for Bridgeport and Similar Knee Type Milling Machines. These will fit almost any vertical knee type mill out there with the 5/8" Shaft End, Including but not limited to Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, Enco, Turn Pro, Vectrax, Acra, Birmingham, Accu, First, and many, many more. As long as it is the Bridgeport Type Machine, it should fit.
  • Package Included:1 x Milling machine power feeder








Buy knee mill from Amazon.com


Jet 690093 JTM-4VS Mill, 3-Axis Newall DP700 DRO (Knee), X Y Z-Axis Powerfeed

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Meehanite casting Precision bored and honed milling head Large diameter quill is chromed High precision Class 7 spindle bearings Chrome plated motor shaft has lower bearing support

Buy knee mill from Amazon.com
  • Authorized Distributor Includes All Documentation and Support.
Buy knee mill from Amazon.com


Freud 1-11/16" (Dia.) Premier Adjustable Rail & Stile Bit with 1/2" Shank (Shaker) (99-762)

Buy knee mill
Check Price on Amazon
Buy knee mill from Amazon.com

Description:

Create extended tenons for extra door joint strength (patented solutions)

Buy knee mill from Amazon.com
  • Overall Dia. (D) 1-11/16", 1/2" Shank
  • Adjust groove width to suit different panel thicknesses for rattle free plywood panels or solid wood raised panels
  • Choose from a variety of material thicknesses (5/8 to 1-1/4")
  • Add an optional cutter to your its to create glass panel or screen doors
  • Add optional cutters to create double sided profiles in thicker stock material







Buy knee mill from Amazon.com


Knee mill