Wires needed for subwoofer and amp

Surge Installer Series Amp Installation Kit (8 Gauge, 1,000 Watts)

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

Surge Installer Series Amplifier Kits come completely finished with everything needed to correctly install a mobile audio amplifier. High quality fuse blocks, cables, wire, terminals and hardware are all included to ensure that every installation will perform the way it was designed.

Buy wires needed for subwoofer and amp from Amazon.com
  • 8 Gauge, 1,000w
  • Clear Blue Flexible Pac 18ft Power Cable.6 feet split-loom tube
  • Clear Black Flexible Pac 3ft Ground Cable
  • Platinum-plated 80a Anl Fuse Holder
  • Includes Complete Accessories & Everything Needed For Amp Installation
Buy wires needed for subwoofer and amp from Amazon.com


Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

Rockville RW10CA 10" 800 Watts Peak/200 Watts RMS Slim Powered/Active Sealed Car Subwoofer With Bass Remote. Amplifier will not power up: Check to make sure you have a good ground connection, check that the Remote Input (Turn-On) has at least 5VDC, check that there is battery power on the () terminal, check that there is at least 12v, check all fuse, replace if necessary, make sure that the Protection LED not illuminated. If it is lit, shut off the amplifier briefly, and then repower it.

Buy wires needed for subwoofer and amp from Amazon.com
  • Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
  • 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
  • Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
  • Thermal Protection Circuit, Short Protection Circuit.
  • Overload Protection Circuit. Phase Switch: 0 or 180.
  • Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 18dB @ 45Hz.
  • Subwoofer Level Remote Control. Built in Subsonic Filter @ 29Hz.
  • Maximum Power RMS: 200 Watts. Impedance: 2 Ohm. Dimensions: 12.4 x 13.4 x 2.7 (L x W X H) Inches.
  • Frequency Response: 20Hz - 150Hz. Sensitivity: 90dB @ 1w / 1m.



Buy wires needed for subwoofer and amp from Amazon.com


InstallGear 4 AWG Gauge Gold Ring Set Screw Battery Ring Terminals (4 Pack)

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

4 Gauge input
Gold plated for maximum conductivity
Set screw style to ensure tight wire fit
Red/Black gear logo to differentiate between positive and negative
3/8" wire input and 5/16" ring hole size
Includes: (4) 4 Gauge terminals (as pictured)

Buy wires needed for subwoofer and amp from Amazon.com
  • 4 Gauge input - (4) 4 Gauge terminals (as pictured)
  • Gold plated for maximum conductivity
  • Set screw style to ensure tight wire fit
  • Red/Black gear logo to differentiate between positive and negative
  • 3/8" wire input and 5/16" ring hole size

Buy wires needed for subwoofer and amp from Amazon.com


Polk Audio PSW10 10" Powered Subwoofer - Featuring High Current Amp and Low-Pass Filter Up to 100 Watts Big Bass at a Great Value Easy integration Home Theater Systems

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

PSW10 fills in the bottom end of your home theater system. Relieve your main speakers from performing bass duty and let them work on the mids and highs. PSW10 is a great addition to any subwooferless system and will bring your movie watching experience to the next level. All woofers feature a floor coupled downward firing port. This configuration brings you maximum bass impact while keeping the front of the cabinet as low profile as possible. All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industrys most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime. The voltage of the item is Standard US Voltage / 120 volts.

Buy wires needed for subwoofer and amp from Amazon.com
  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME - Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion. PSW Series subwoofers blend perfectly with systems composed of other Polk loudspeakers, especially TSi, RM and R/T/M Series speakers
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS - Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for a multiple subwoofers, make this sub cohesive and complete





Buy wires needed for subwoofer and amp from Amazon.com


Add An Amp Amplifier Adapter Interface to Factory OEM Car Stereo Radio System for select Toyota Scion Subaru Vehicles- Add Subwoofer Bass Amp etc.- No Factory Premium Amp- Vehicles listed below

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output. Not compatible with factory amplified stereo systems. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Connection is done at back of radio. Compatible vehicles: 1989 - 1992 Geo Prizm, 2013 - 2016 Scion FR-S, 2012 - 2015 Scion iQ, 2005 - 2016 Scion tC, 2004 - 2006 Scion xA, 2004 - 2015 Scion xB, 2008 - 2014 Scion xD, 2013 - 2018 Subaru BRZ, 2016-2018 Subau Crosstrek, 2016-2018 Subaru Forester, 2015 - 2019 Subaru Impreza, 2015 - 2018 Subaru Outback, 2015 - 2016 Subaru XV Crosstrek, 1988 - 2017 Toyota 4-Runner, 1987 - 2017 Toyota Camry, 1999 - 2009 Toyota Camry Solara, 1986 - 2006 Toyota Celica, 1987 - 2019 Toyota Corolla, 1987 - 1992 Toyota Cressida, 2000 - 2006 Toyota Echo, 2007 - 2014 Toyota FJ Cruiser, 2001 - 2016 Toyota Highlander, 1987 - 2002 Toyota Land Cruiser, 2005 - 2010 Toyota Matrix, 1987 - 1995 Toyota MR2, 2000 - 2006 Toyota MR2 Spyder, 1992 - 1997 Toyota Paseo, 1987 - 1995 Toyota Pickup, 1991 - 1997 Toyota Previa, 2001 - 2018 Toyota Prius, 1996 - 2016 Toyota RAV4, 2001 - 2016 Toyota Sequoia, 1998 - 2016 Toyota Sienna, 1986 - 1998 Toyota Supra, 1993 - 1998 Toyota T-100, 1995 - 2016 Toyota Tacoma, 1987 - 1998 Toyota Tercel, 2000 - 2018 Toyota Tundra, 1987 - 1990 Toyota Van, 2009 - 2015 Toyota Venza, 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Toyota Yaris

Buy wires needed for subwoofer and amp from Amazon.com
  • Use this adapter to make your installation of an amplifier to the factory system faster with a cleaner install. Use this plug and play adapter so you don't have to cut or splice into the factory wiring. Provides one pair stereo rca output and a power wire for the remote amplifier turn on connection. Adjustable left and right gain output.
  • VERY IMPORTANT----PLEASE READ BEFORE PURCHASE---- Not compatible with factory amplified stereo systems like JBL, Bose, etc. Only works with factory non-amplified systems (no JBL/Synthesis, Bose, etc.). Connection is done at back of radio.
  • Compatible Vehicles: 1989 - 1992 Geo Prizm, 2013 - 2016 Scion FR-S, 2012 - 2015 Scion iQ, 2005 - 2016 Scion tC, 2004 - 2006 Scion xA, 2004 - 2015 Scion xB, 2008 - 2014 Scion xD, 2013 - 2018 Subaru BRZ, 2016-2018 Subau Crosstrek, 2016-2018 Subaru Forester, 2015 - 2019 Subaru Impreza, 2015 - 2018 Subaru Outback, 2015 - 2016 Subaru XV Crosstrek, 1988 - 2017 Toyota 4-Runner, 1987 - 2017 Toyota Camry, 1999 - 2009 Toyota Camry Solara, 1986 - 2006 Toyota Celica, 1987 - 2019 Toyota Corolla,
  • 1987 - 1992 Toyota Cressida, 2000 - 2006 Toyota Echo, 2007 - 2014 Toyota FJ Cruiser, 2001 - 2016 Toyota Highlander, 1987 - 2002 Toyota Land Cruiser, 2005 - 2010 Toyota Matrix, 1987 - 1995 Toyota MR2, 2000 - 2006 Toyota MR2 Spyder, 1992 - 1997 Toyota Paseo, 1987 - 1995 Toyota Pickup, 1991 - 1997 Toyota Previa, 2001 - 2018 Toyota Prius, 1996 - 2016 Toyota RAV4, 2001 - 2016 Toyota Sequoia, 1998 - 2016 Toyota Sienna, 1986 - 1998 Toyota Supra, 1993 - 1998 Toyota T-100, 1995 - 2016 Toyota Tacoma,
  • 1987 - 1998 Toyota Tercel, 2000 - 2018 Toyota Tundra, 1987 - 1990 Toyota Van, 2009 - 2015 Toyota Venza, 2007 - 2018 Toyota Yaris
Buy wires needed for subwoofer and amp from Amazon.com


Kenwood P-WD250MRW 10-Inch Marine Subwoofer and Amplifier Package

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

Prepare for adventure on the open water with a 10" Marine Subwoofer & Amp Package. Including a mono amp & a 10" subwoofer with dual voice coils, this package features RCA speaker-level inputs and vented voice coil. The conformal-coated PCB and 200W peak power provide users with a reliable listening experience.

Buy wires needed for subwoofer and amp from Amazon.com
  • Kac-210mr Mono Amp:
  • 200w Max
  • 80hz Low-pass Filter (12db/octave)
  • Package includes KFC-W250MRW marine subwoofer and KAC-201MR amplifier
  • 200 watts maximum power output
  • Dual 1.5-ohm voice coils
  • Pearl mica polypropylene woofer with rubber surround
  • Power handling: 50-200 watts RMS








Buy wires needed for subwoofer and amp from Amazon.com


100ft 18 Gauge Speaker Wire - Copper Cable in Spool for Connecting Audio Stereo to Amplifier, Surround Sound System, TV Home Theater and Car Stereo - RSW18100

Buy wires needed for subwoofer and amp
Check Price on Amazon
Buy wires needed for subwoofer and amp from Amazon.com

Description:

Pyramid Model : RSW18100

18 Gauge 100 ft. Spool of High Quality Speaker Zip Wire

  • 18 Gauge 100 ft. Spool of High Quality Speaker Zip Wire

  • Pyramid offers a new line of speaker wires in its finest to accommodate DIY stereo to amplifier installation needs. It is 18-gauge to offer just enough resistance and electrical flow without the risk of overheating. The wire is surrounded by a plastic jacket for insulation and undistorted signal. Theres even a red mark to distinguish polarity easily. For convenience and dispensing, the 100 feet long wire is neatly wrapped around a plastic spool.

    Buy wires needed for subwoofer and amp from Amazon.com
    • 18 GAUGE THICKNESS: This 18-gauge copper speaker wire offers very easily connection for speakers to amplifiers or receivers. The thickness is just enough for resistance and electrical flow without the risk of overheating
    • CUT AS DESIRED: The wire can be cut as desired for specific installation needs. If the plastic jacket is removed, the wire can be left bare or use wire crimp accessories to connect to stereo and speakers
    • UNDISTORTED SIGNAL: Made with plastic jacket surrounding the speaker wire to help deliver high-quality undistorted signals to and from all of connected audio equipment. This also helps with insulation
    • POLARITY MARK: There's a red mark outlined on one side of the cable wire. Its purpose is to easily distinguish the polarity and help properly set up any audio stereo, surround sound system, TV home theater and even a car
    • 100FT CONVENIENT DISPENSE: This very long 100ft speaker wire is neatly wrapped around a hard plastic spool for easy and convenient dispensing. It can be used without hassle and instantly too

    Buy wires needed for subwoofer and amp from Amazon.com


    Rockville USS10 10" 800w Slim Under-Seat Powered Car/Truck Subwoofer SubAmp Kit

    Buy wires needed for subwoofer and amp
    Check Price on Amazon
    Buy wires needed for subwoofer and amp from Amazon.com

    Description:

    The USS10 is an all in one solution to give you great sounding bass in your vehicle without taking up a ton of space. This sub enclosure is only 2.9" thick so that it can easily fit under your seat. The amplifier is built in, so installation and wiring is easy and clean. This is a true all in one subwoofer system with the sub in the enclosure, and a top of the line amp built in.

    Features:

    Rockville USS10 800 Watt 10" Slim Car Subwoofer
    800 Watts Peak / 200 Watts RMS
    PWM MOSFET Power Supply
    Low Level RCA Input
    High Level Inputs with Auto Turn-On Technology
    Adjustable Input Sensitivity
    Soft Delayed Remote Turn-On
    Thermal Protection Circuit, Short Protection Circuit
    Green Power/Red Protect LED
    Phase Switch : 0 or 180
    Low Pass Filter : 50Hz - 150Hz
    Bass Boost : 0 - 12dB @ 45Hz
    Subsonic Filter : 20Hz - 50Hz
    THD < 0.15
    Subwoofer Level Remote Control
    Fuse Rating : Single 25A
    Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit
    (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable
    17' 10 Gauge Translucent Blue SuperFlex Power Cables
    17 18 Gauge Blue Remote Cable
    17 16 Gauge Clear Speaker Wire
    3' 10 Gauge Clear SuperFlex Ground Wire
    Gold Plated AGU Heat Resistant Fuse Holder
    40 Amp ATU Inline Fuse
    7 Split Tube Loom
    Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets 
    Soft abrasion proof insulating jacket allows for 100 improved flexibility
    PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

    Buy wires needed for subwoofer and amp from Amazon.com
    • Rockville USS10 800 Watt 10" Slim Car Subwoofer. 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity.
    • Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED. Phase Switch : 0 or 180. Low Pass Filter : 50Hz - 150Hz. Bass Boost : 0 - 12dB @ 45Hz. Subsonic Filter : 20Hz - 50Hz. THD < 0.15. Subwoofer Level Remote Control. Fuse Rating : Single 25A. ¬†
    • We wanted to truly make installation a breeze so we designed this unit with the user in mind from start to finish. We added high level inputs so you can install this to an aftermarket or factory system. The high level input allows you to install this even if you have no preamp outputs available.
    • Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable.
    • 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets¬†. Soft abrasion proof insulating jacket allows for 100 improved flexibility . PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F. . ¬†








    Buy wires needed for subwoofer and amp from Amazon.com


    Rockville RWS12CA Slim 1200 Watt 12" Powered Car Subwoofer Enclosure Wire Kit

    Buy wires needed for subwoofer and amp
    Check Price on Amazon
    Buy wires needed for subwoofer and amp from Amazon.com

    Description:

    Rockville has developed and perfected a smart, integrated solution for adding bass to any vehicle's audio system. The Rockville slim powered subwoofer combine subwoofers with matching enclosures and amplifiers for optimal bass performance.

    Features:

    Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure
    3D Molded Acrylic Dust Cap
    Expanded & Rolled Steal Basket
    High Density Laminated Foam Surround
    Vented Core Magnet Motor Structure
    2" High Temperature Aluminum Voice Coil
    8mm Washer & Yoke Plates
    13.6mm Peak-to-Peak X-Max
    70oz. Magnet Motor Structure
    Super Slim Sealed MDF Enclosure Design
    Aviation Grade Black Tweet Carpet with Embroidered Logo
    Black Texture Synthetic Leather Front Panel
    Dimensions: 24" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth
    Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit
    (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable
    Gold Plated AGU Heat Resistant Fuse Holder
    60 Amp AGU Gold Plated Fuse
    7 Split Tube Loom
    Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
    Soft abrasion proof insulating jacket allows for 100 improved flexibility
    PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

    Buy wires needed for subwoofer and amp from Amazon.com
    • Rockville RWS12CA Slim 1200 Watt 12" Amplified Powered Car Subwoofer Enclosure. 1200 Watts Peak power output. 400 Watts RMS CEA rated. 12" Super Slim Subwoofer. Ultra Stiff Composite Pulp Cone with Kevlar Reinforcement. 3D Molded Acrylic Dust Cap. Expanded & Rolled Steal Basket. High Density Laminated Foam Surround. High Power Strontium Magnet with Ultra Saturated High BL Motor Structure
    • Vented Core Magnet Motor Structure. 2" High Temperature Aluminum Voice Coil. 8mm Washer & Yoke Plates. 13.6mm Peak-to-Peak X-Max. 70oz. Magnet Motor Structure. Super Slim Sealed MDF Enclosure Design. Aviation Grade Black Tweet Carpet with Embroidered Logo. Black Texture Synthetic Leather Front Panel. Impedance: 4-ohms. Frequency response: 38Hz-500Hz. SPL @ 1w/1m: 96dB. Dimensions: 24" Length x 15" Height 4.37" Top Depth x 6.65" Bottom depth
    • Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Clear SuperFlex Ground Wire
    • Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
    • Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F








    Buy wires needed for subwoofer and amp from Amazon.com


    SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

    Buy wires needed for subwoofer and amp
    Check Price on Amazon
    Buy wires needed for subwoofer and amp from Amazon.com

    Description:

    General Features:  2300 Watts Peak Power Rating Complete 4 Gauge Amp Install Kit Heat Resistant Wire Jacket Premium Heat Durability In-Line AGU Fuse Holder Triple Shielded RCA Interconnect Cable Premium Grade Cables   What's Included:  4 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet 4 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer  1 Year Manufacture's Warranty Please Note:  Bulk Packaged. Not For Resale. WIRE IS NOT AWG (AMERICAN WIRE GAUGE). SET TO INTERNATIONAL STANDARDS. 

    Buy wires needed for subwoofer and amp from Amazon.com
    • 4 Gauge Red CCA (Copper Clad Aluminum) Power Wire: 17 Feet / 4 Gauge Black CCA (Copper Clad Aluminum) Ground Wire: 3 Feet
    • Black/White Triple Shielded Twisted Pair RCA Interconnect: 17 Feet
    • 16 Gauge Brown/Silver Speaker Wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet
    • Inline AGU Fuse Holder w/ 80 Amp AGU Fuse / Protective Black Wire Loom
    • Installation Accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included









    Buy wires needed for subwoofer and amp from Amazon.com


    Wires needed for subwoofer and amp