Drill hole through glass

BLENDX Diamond Hole Saws Kit -Tile and Glass Hole Saws Cutting Drill Bits for Bottle, Ceramics, Porcelain 1/4" - 2" (6-50mm) - 10 Pack

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

BLENDX Diamond Drill Bits:
Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass.

Description:
Material: steel
Good Performance and long life.
Excellent for making clean and accurate hole on glass and tile.
Works better with a electric drill (Excluding in the item).
Size(outside diameter): 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm.
Total length: about 5.2cm
Applicable Industry: Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing.

Use note:

1. Start your hole diagonally, make a round trace and then hold drill straight.
2. Always use lubrication (water), otherwise the diamond core drill will burn.

Package Includes:
10pcs * Diamond Coated Drill Bit

Buy drill hole through glass from Amazon.com
  • Diamond hole saw / core drill style bit.
  • 10 Sizes: 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm
  • Application: Drill Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone
  • SPEED KILLS: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
  • Warrnings: Not for use on Concrete or for depths beyond about 1/2"; Enough water is MUST HAVE for lubrication and cooling when drilling





Buy drill hole through glass from Amazon.com


Neiko 00823A Diamond Grit Hole Saw Drill Bit Set, 5 Piece 5/32

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Neiko 5-piece 5/32 to 1/2-inch diamond dust hole saw set. 1/4-inch shank size, saw sizes: 5/32, 1/4, 5/16, 3/8 and 1/2-inch. Heavy duty hole saws plated with nickel with diamond coating gives superior performance on ceramic tile and similar material.

Buy drill hole through glass from Amazon.com
  • Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws
  • Side holes allow for easy slug removal after drilling
  • Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics
  • Nickel plating on these bits maximizes your tool's life with great resistance to corrosion
  • Sizes include: 5/32", ", 5/16", 3/8", and " with a cutting depth of "and " shank





Buy drill hole through glass from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets

10 Popular Sizes: 1/4 to 2 - Elegant storage case.

High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2

Popular 10 Sizes - Great Value

No need for Center Pilot Drills

Please Do NOT Use Dry

Maximum 3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guides

Buy drill hole through glass from Amazon.com
  • Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
  • Best value set in durable zipper case. Great gift idea for any DIY lover.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
  • Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.





Buy drill hole through glass from Amazon.com


Diamond Hole Saw - 15 pcs Diamond Drill Bit Set Extractor Remover Tools for Glass, Ceramics, Porcelain, Cermic Tile (1/4"-2")

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

High Rigidity Diamond

This tile hole saw are made of industrial grade carbon steel with nickel-plated coated body that resist corrosion. Thicken corundum coating on the tops offers superior cutting strength for maximum drilling outcomes.

Extraordinarily Sharp

Each hole drill bit was processed by a smooth and exact finish that lower the incision resistance and drill pressure, increase the sharpness and the use of water lubrication. Excellent for making clean and precise hole on glass or ceramic and considerably extending drill bit life.

Large Clearance Hole

These ceramic drill bits along with large clearance hole facilitate the entrance of cooling water and escape of chips. Making the drilling process more easy and relax.

Widely Application

There are 15 different sizes included with this glass drill set to meet various demands. Perfect for drilling glass, tile bottles, blocks jars, fiber glass porcelain tile ceramic, vitrified, brick and stone.

15 Sizes

Each drill bit set includes: 0.24", 0.32", 0.4", 0.48", 0.55",0.63", 0.11", 0.79", 0.87", 0.98", 1.02",1.11", 1.18", 1.57", 1.97"

Total length: about 2".

Package Contains

15Pcs* Diamond Coated Drill Bit

Attention:

Please keep the speed within 800-1000 per minute, low drill pressure and increased use of water lubrication will extend drill bit life.
And please keep adding water when the diamond drill bits are working on the glass or ceramics.

Buy drill hole through glass from Amazon.com
  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life.
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier.
  • 【WIDE USAGE 15 different drill bits included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone.
  • 18-WARRANTY】Unconditional 18-month warranty on the diamond hole saw drill bit.







Buy drill hole through glass from Amazon.com


4 1/2 Inch Diamond Hole Saw Diamond Tipped Porcelain Tile Ceramic Glass 4.5 Inch Hole Saw Drill Bit Standard Shank Easy To Use by DRILAX

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Rare Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 1/4" in depth.

Shank size is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guide

Buy drill hole through glass from Amazon.com
  • 4 1/2" Diamond Coated Hole Saw Drill Bit. You will get a perfect 4.5 inch hole through some really tough material.
  • Right size for drilling a hole through tiles for new toilet. Cuts Through Ceramic, Porcelain, Glass, Marble, Granite
  • Wet Type. Do not use dry. Pour water orĀ built a dam around the cutting area with plumbers putty and fill it with water
  • Drills 1 inch deep.
  • There is no need for a Pilot Drill Bit.Ā  Pilots are not safe for glass.









Buy drill hole through glass from Amazon.com


Tacklife AHS02C Diamond Drill Bits Hole Saw Drill Bits Hollow Extractor Remover Set Tools with 10 Packs, Diamond Coating, Carbon Steel for Glass, Ceramics, Porcelain, Ceramic Tile, Marble 6-50mm

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.

Features
1.Diamond Drill Bits Tools are suitable for Drilling Glass,Tile Bottles, Blocks Jars, Fiberglass
Porcelain Tile Ceramic, Slate Mable, Granite Light Stone, etc
2.Pack of 10pcs for your options.
3.High precision and especially impact resistance.


Specifications
Material: High quality carbon steel, Uniform diamond coating.
Color: Silver.
Cutting Depth: 1/2''(12.7 mm).
Diameter: 6mm,8mm,10mm,14mm, 16mm,18mm,22mm,35mm,40mm,50mm(10pcs).
Perfect for : Lithium Drill, AC Drill, Hammer Drill, Drill Press and so on.


Package content:
1 x Tacklife Diamond Drill Bits
1 x Kraft Paper Package
1 x User Manual
1 x 24 month Warranty


How to drill correctly:
1.Firstly, mark the point where you want to drill the hole;
2.Next, fix the drill at the angle of 45to make a drilling trace at a high rotating speed;and add water during the drilling process;
3.Then drill vertically from the other side of the drilling trace at a slow speed to prevent breakthrough.


Notes
1.Please not for use on concrete or for depths beyond about 1/2 ''(12.7mm).
2.please make sure that water must be added during drilling to prevent drill burning.
3.Lower drill speed, its inner pressure and improve the use of water lubrication to protect drill bits considerably.

Buy drill hole through glass from Amazon.com
  • DIAMOND COATING & NIKELP LATING SURFACE - Diamond coating enhances the drilling speed, which makes the bit more sharp; and the nickel plating surface can extend the service life and enhance the surface corrosion resistance
  • CARBON STEEL -the drill bits are made of carbon steel, and solidified by enhanced electroplating, together with perfect combination of diamond coating and carbon steel, making it conducive to grip drills (These drill bits do not have center pilot drills)
  • SIDE OPENING &LASER MARKING- with the side flute hole design, the bit can remove the waste to keep the drill bit clean;with laser marking, the size mark will be more clear and lasting than others, and not easy to wear
  • 10 SIZES - 10 Sizes: 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm, 40mm, 50mm, it is perfect for drill glass, tile bottles,blocks jars, fiberglass porcelain tile ceramic, slate Mable, granite light stone
  • WHAT YOU GET - Tacklife AHS02C Diamond Drill Bits, Kraft Paper Package, User Manual, 24 months Warranty








Buy drill hole through glass from Amazon.com


Diamond Drill Bit Set, DRILLPRO 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm - 30mm

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Diamond Drill Bit Set, Drillpro 10 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm -- 30mm

Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass.

Features:

- This is a brand new product
- This diamond bit core drilling removes a complete circle glass, tiles, marble, granite, ceramic or other material and only needs water for lubrication
- Can be used with a standard electric drill (not included)
- Easy to use, high quality, good performance, long life
- Excellent for making clean and accurate hole on glass, tile and marble
- Always use lubricant (water), otherwise the diamond core drill will burn
- Start the hole diagonally, make a round trace and then hold drill drittoSpecifica

Specifications:

Model: 10 Pcs 6mm -- 30mm

Size:
6mm / 12:23 ", 8mm / 0.31", 10mm / 0.39 "to 12mm / 0:47", 14mm / 0:55 ", 16mm / 0.62" 18mm / 0.7 ", 20mm / 0.78", 22mm / 0.86 ", 30mm / 1.17"

Note:

If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much. You're drill bit should never be hot to the touch, not even warm.
- Slowest speed
- Coolant
- Minimum pressure

The general rule is the smaller the diameter of your drill bit, the faster drill speed you can use. The harder your material, the slower drill speed you should use.
Packaged included:
10pcs Diamond Coated Hole Saw Drill Bits

Buy drill hole through glass from Amazon.com
  • SMALL RESISTANCE: Small incision resistance, opening speed is quickly, easy removal of chips and other advantages.Also help to open accurately. Large chip holes to ensure that when the punching smooth, punching accurate.
  • DURABLE: Nickel-plated with a diamond dust coating offers superior performance and cutting strength.Extended service life.This diamond drill bits are high quality and good performance that excellent for making clean and accurate hole.
  • IDEAL FOR: This diamond coated core drill bit removes a complete circle from glass, marble, tiles,granite, ceramic or other.Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
  • TIP: Can be used with a standard electric drill (not included), Always use lubrication (water), otherwise the diamond core drill will burn. Warnings: Not for use on Concrete or for depths beyond about 1/2"; Water is required for lubrication when drilling.
  • 10 SIZES: Total 10 different sizes (6mm,8mm,10mm,12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 30mm).Different sizes meet your different needs,help you in different places.







Buy drill hole through glass from Amazon.com


JINGLING 75mm 3" inch Diamond Coated Tool Drill Bit Hole Saw for Glass Tile Ceramic Marble Color Silver

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

75mm 3" inch Diamond Coated Drill Bit Hole Saw Glass Tile Ceramic Marble Granite
Product Name: 3" inch Diamond tip drill bit, 75 mm Glass hole saw bit, 75mm Glass drill bit
Product Description:
Hole Diameter: 75mm (3" inch)
Shank Diameter: 10mm (3/8")
Total Length: 55mm (2-3/16")
Drill depth: 26mm depth
Quantity: 1 Piece
Features:
Brand new & high quality
Easy to use, good performance and long life
Excellent for making clean and accurate hole on glass, tile, stone, granite and marble
Works better with an electric drill (Excluding in this item)
Use with water as a lubricant
Drilling speed: drill a hole in seconds
Quick Tips
1. Please add water for coolant and drill slowly
2. Start drill at 45 degree to surface and align to 90 degree as hole forms
3. Never use drills while machine is in hammer action
4. Holes require no futher work as cutting is clean
How to use a hand drill to drill holes in the tile?
Step 1. The bit on the tile 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the tile finally
Welcome to Visit Our Store:
www.amazon.com/shops/DiamondTools30

Buy drill hole through glass from Amazon.com
  • Product Name: 75mm Diamond tip drill bit, 75 mm Glass hole saw bit, 3 inch Glass drill bit
  • Hole Diameter: 75mm (3"); Shank Diameter: 10mm (3/8"); Total Length: 55mm
  • Suitable for use in drill hole on glass, tile, ceramic, stone, marble or granite
  • The hole does not need further work because the cut is clean
  • Start drill at 45 degree to surface and align to 90 degree as hole forms









Buy drill hole through glass from Amazon.com


Drilax 5 Pcs Diamond Drill Bit Set 3/4", 1", 1-1/4", 1-1/2", 1-3/4" - Wet Cutting Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Bottles, Lot 5 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucet Drilax052045

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

This is a great value set of 5 pieces: 3/4" (0.75 inch), 1 inch, 1 1/4" (1.25 inches), 1 1/2" (1.5 inches), 1 3/4" (1.75 inches)

Great Value

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1" in depth.

Shank sizes vary but the largest shank is 3/8" - common electric or rechargable drillers can be used.

Drilax diamond coated drill bits work great on a wide array materials such as Ceramic and Porcelain Tiles (both wall and floor), Glass Slabs, Fish Tanks, Aquariums, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Stucco, Rock slabs, etc.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE - PERFECT FOR DIY
Center pilot drill bits are for wood, metal, etc.; Drilax diamond drill bits do not require a pilot drill. Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Drilax has a variable diameter drill bit guide available on Amazon. This drill bit guide will secure on the surface and position the diamond drill bit.

Buy drill hole through glass from Amazon.com
  • PREMIUM QUALITY, LONG LASTING, TALL (DEEPER CUTS) Diamond Hole Saw Drill Bit Tool Set in Elegant PU Zipper Storage Case. High Density Poly Insert Included. You can use it as a guide to keep the hole saw in position.
  • BUY AS A SET and SAVE OVER 80 Percent on MOST POPULAR 5 Sizes: 3/4, 1, 1-1/4, 1-1/2, 1-3/4 - Having these sizes available will help you cover almost all of your applications.
  • SPECIAL FEATURE : INCREASED DEPTH of CUT - These hole saws are 30 Percent TALLER (deeper) than most competitors. You can drill through thicker materials with our tools. 1-3/8 inch counter-tops are no problem. Shank size is 3/8 inch for common drills (corded electric, cordless rechargeable, upright, other rotary tools)
  • EXCELLENT RESULTS in Granite, Ceramic & Porcelain Tiles, Glass, Marble, Slate, and many types of Stones.
  • DRILAX BUILT QUALITY - WE ARE HERE TO HELP. Shank sizes vary, maximum shank is 3/8" - suitable for all common electric drillers.







Buy drill hole through glass from Amazon.com


Diamond Drill Bits, LepoHome 15 PCS Hollow Core Drill Bit Set for Ceramic, Glass, Porcelain Tile Diamond Hole Saw Tile Set Glass Drill Bit, 1/4 to 2 Inch

Buy drill hole through glass
Check Price on Amazon
Buy drill hole through glass from Amazon.com

Description:

Diamond Drill Bit Set, 15 PCS Glass Hole Saw for Tiles Glass Ceramic Marble Bottles DIY,6mm -- 30mm

Features:
Good performance:diamond dust coating offers superior performance and cutting strength.
Wide application of the Tile Hole Saw: coated core drill bit removes a complete circle from glass, tiles, marble, granite, ceramic or other materials and only needs water for lubrication.
15 SIZES: No matter which size hole you want, it can always drill a perfect hole for you.

Specifications:
Material: high quality steel, diamond dust coating
Color: Silver
Size: 6 - 50mm / 0.23"-1.97"
(6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 26mm, 28mm, 30mm, 40mm, 50mm)
Quantity: 15 pcs

Note:
If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much.
You're drill bit should never be hot to the touch, not even warm.
Slowest speed
Always use lubrication (water)
Minimum pressure

Package Included: 15 x Tile Hole Saw

Buy drill hole through glass from Amazon.com
  • This Tile Hole Saw have 15 Sizes(Diameter): 6mm(1/4"), 8mm(5/16"), 10mm(3/8"), 12mm(1/2"), 14mm(9/16"), 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 26mm(1-1/32"), 28mm(1-3/32"), 35mm(1-2/5"), 40mm(1-1/2"), 50mm(2"). Satisfy most of your different needs.
  • Rustless & Durable: This diamond drill bits are made of high strength Carbon Steel with smooth nickel plating surface to extend the service life.
  • Quick, Sharp & Smooth Cut: Each diamond hole saw was coated with high quality Diamond to enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges In Seconds. Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably.
  • Application: Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone (especially for glass AND tile). Not for use on Concrete or for depths beyond about 1/2". Will work with all electric drills.
  • Attention: Please keep the speed in 800-1000 per minute, keep adding water to keep the drill cool, strictly prohibit from dry drilling.








Buy drill hole through glass from Amazon.com


Drill hole through glass