Rockville RWK4CU 4 AWG Gauge 100 Copper Complete Amp Installation Wire Kit OFC
er cable. Rockvilles engineering team over-built and designed the cables using thousands of strands of only true 100 oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces surface skin impedance loss so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100 copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100 Pure Copper RCA Cables
4 Gauge Power Amplifier Installation Kit
Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
Made from silver-tinned 100 virgin copper for a pure uninterrupted transfer of power and signal
The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
Strand Count: 1862
- Looking for a wire kit that has 100 true specifications? A wire kit that uses 100 copper 4-gauge cable? Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit.
- The power and ground cables aptly named "Mega Power Cable" is a no compromise power cable. Rockville's engineering team over-built and designed the cables using thousands of strands of only true 100 oxygen-free, silver-tinned copper strands.
- The use of a proprietary special twisting process reduces "surface skin impedance loss" so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet!
- The 100 copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility.
- Features:..Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100 Pure Copper RCA Cables.4 Gauge Power Amplifier Installation Kit.Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts.
- This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
- Made from silver-tinned 100 virgin copper for a pure uninterrupted transfer of power and signal.The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems.Strand Count: 1862.BC-5W2 Compliant.
- This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.
- The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy.
BOSS Audio KIT10 4 Gauge Amplifier Installation Wiring Kit A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers
BOSS Audio KIT10 4 Gauge Amplifier Installation Wiring Kit Power Cable, AGU Fuse, Fuse Holder, Ground Cable, Remote Turn-on Wire, Speaker Wire, RCA Interconnect, Split Loon Tubing, Wire Ties, Rubber Grommets, Gold-plated Ring Terminals, Gold-plated Speaker Terminal
- 20 Foot / 4 Gauge Red Power Cable, High Quality Gold Plated Competition AGU Fuse
- Gold Plated AGU In-line Fuse Holder, 3 Foot / 4 Gauge Black Ground Cable
- 16 Foot / 18 Gauge Blue Remote Turn-On Wire, 30 Foot 16 Gauge Speaker Wire
- 17 Foot High Performance RCA Interconnect Cable, 6 Foot Split Loom Tubing
- (20) 4" Wire Ties, (4) Rubber Grommets
- 5/16" Gold-Plated Ring Terminals, 1/4" Gold-Plated Ring Terminal, (4) Gold-Plated Speaker Terminals
Surge Installer Series Amp Installation Kit (8 Gauge, 1,000 Watts)
Surge Installer Series Amplifier Kits come completely finished with everything needed to correctly install a mobile audio amplifier. High quality fuse blocks, cables, wire, terminals and hardware are all included to ensure that every installation will perform the way it was designed.
- 8 Gauge, 1,000w
- Clear Blue Flexible Pac 18ft Power Cable.6 feet split-loom tube
- Clear Black Flexible Pac 3ft Ground Cable
- Platinum-plated 80a Anl Fuse Holder
- Includes Complete Accessories & Everything Needed For Amp Installation
InstallGear 4 Gauge Complete Amp Kit Amplifier Installation Wiring Wire
17ft Red Soft Touch 4 Gauge CCA Power Cable
3ft Black Soft Touch 4 Gauge CCA Ground Cable
17ft Soft Touch 2-Channel RCA Cable
17ft Soft Touch CCA Speaker Wire
17ft Remote Wire
6ft Split Loom
ANL Fuse Holder
100 Amp ANL Fuse
(4) 4 Gauge Crimp Ring Terminals
CCA Copper (Copper Clad Aluminum)
- 17ft Red Soft Touch 4 Gauge CCA Power Cable
- 3ft Black Soft Touch 4 Gauge CCA Ground Cable
- 17ft Soft Touch 2-Channel RCA Cable
- 17ft Soft Touch CCA Speaker Wire
- ANL Fuse Holder with 100A Fuse
Crunch PX-1000.2 2 Channel 1000 Watt Amp A/B Car Stereo Amplifier Wiring Kit
This **Crunch PX 1000.2 2 Channel Amplifier** is a perfect entry level amplifier for your car audio needs. It has high quality circuit and hardware designs along with exclusive technologies to improve sound quality and minimize distortion. Crunch POWERX incorporates full Class A/B technology in stereo and four channel amplifiers along with Class D in the mono. Class A/B sounds better, but the PC boards require a bit more space that in other circuit topologies. With Crunch POWERX we have trimmed away some of the more esoteric features to deliver a great amplifier that sound like you would expect Crunch to sound. The POWERX line also includes Crunch technology like QTD (Quick Thermal Dispersion) Technology which puts more aluminum on the heatsink than a normal amplifier. QTD assures the amplifiers make huge power while running very cool with nearly undetectable musical distortions. This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car. The amp kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, (20) 4" wire ties, (3) rubber grommets, a #10 ring terminal, a 5/16" ring terminal, and a 1/4" ring terminal.
- Crunch PX 1000.2 2 Channel Car Amplifier
- 2 Ohms: 2 x 500 watts
- 4 Ohms: 2 x 250 watts
- Mono Bridged @ 4 Ohms: 1 x 1000 watts
KnuKonceptz KCA Complete 4 Gauge Amp Installation Wiring Kit
The KCA Kable (Kolossus Copper Aluminum) is the next generation of our Copper Clad Aluminum (CCA) power and ground cables. The new KCA 4 Gauge uses 29. 44mm2 of Copper Clad Aluminum (CCA) to transfer current from your battery to amplifier. Copper Clad Aluminum (CCA) is made up of 90 Aluminum and 10 Copper. The KCA 4 Gauge Kable used throughout this kit offers incredible flexibility and a rugged PVC outer jacket that is impervious to grease and oil. The PVC outer jacket can withstand extreme temperatures (-40 to 105 C). Kit Includes -18 & ; 4 AWG Blue KCA Kable (CCA) Power Wire -3 & ; 4 AWG Black KCA Kable (CCA) Ground Wire -Inline fuse holder with 80A fuse -5 Meter Bassik Twisted Pair OFC RCA Cable -20 Feet TCA 14 AWG CCA speaker wire -5 Meter Blue Remote / Turn one wire -2 gold plated 4 gauge ring terminals, 2 gold plated 4 gauge spade terminals -grommets and wire ties Beware of "1600 Watt" amp kits that include a 50 or 60A fuse. Its physically impossible for these kits to support this load (refer to our comparison photo) How many watts can this amp kit handle? At KnuKonceptz, we do not use "watts" to rate our amp kits. This is a very inaccurate method to determine what the proper gauge wire required for your amp installation. Many amp manufactures do not represent the output of their product accurately in watts. Please refer to your amplifier & fuse rating, this is a number a manufacture can not fake, well they could but it would put their product in harms way! Add up the fuses on the end of your amp (two 30A fuses = 60A total draw) If this number is under 80A, this kit will fit your application. If over 80A, a larger gauge wire would be required or use our Kolossus Flex 4 gauge amp installation kit. Do not use on loads over 100A Visit our website to see a complete head to head amp kit review from top sellers on vs KnuKonceptz.
- 18 Feet 4 Gauge Ultra Flex Blue KCA Power Wire
- 3 Feet 4 Gauge Ultra Flex Black KCA Ground Wire
- One inline fuse holder with 80A AGU Fuse
- One 17 Foot Bassik Twisted Pair RCA Cable made from Oxygen Free Copper (OFC)
- 20 Feet TCA 14 Gauge CCA Speaker Wire
Car Audio Cable Wiring Kit - 20ft 8 Gauge Powered 1200 Watt Complete Amplifier Hookup for Battery, Head Unit & Stereo Speaker Installation Sound System - Pyle PLAM14
Pyle Model : PLAM14
8-Gauge Amp & Speakers Installation Kit
20ft 8 Gauge 1000 Watts Amplifier Hookup For Battery Head Unit & Speakers Installation Kit
This Pyle Link kit has everything you need to get started installing a new head unit and speakers in your car! Comes with a variety of wires: a 20 ft. 8-gauge red power wire, 4 ft. 8-gauge black ground wire, 20 ft. 16-gauge blue remote turn-on wire, 20 ft. 12-gauge stereo speaker wire, 20 ft. stereo RCA audio cable (male-to-male) and a 6 ft. black split loom cable conduit. Also includes 2 8G ring terminals, 2 8G spade terminals, 5 14-16G spade terminals, 3 butt connectors, 20 cable ties, and 1 black grommet.
- COMPLETE AMPLIFIER KIT: Pyle car audio wiring kit has power wire, terminals, fuse holders, speaker wire, and grommet. They're all high resistance to moisture and has all you need for battery head unit and sound system
- CABLES AND WIRE: Pyle link kit has 20 ft. 8-gauge red power wire, 4 ft. 8-gauge black ground wire, 20 ft. 16-gauge blue remote turn-on wire, 20 ft. 12-gauge stereo speaker wire, 20 ft. stereo RCA audio cable and a 6 ft. black split loom cable conduit
- TERMINALS AND CONNECTORS: Pyle audio wiring kit has 2 8G ring and spade terminals and 5 14-16G spade terminals. It also includes 3 butt connectors, 20 cable ties, and 1 black grommet.
- MARINE GRADE WIRE: Pyle link kit is marine grade wire that can be trusted leaving with no spark and bad ground wiring. They're all packed up with AGU type 60A gold plated fuse. This is perfect installation in car, vehicle, boat and outdoor amplifier
- 1200W POWER RATING: This kit is an ideal for high power protection and sure to complete your amplified vehicle-powered sound system. It gets current from your battery to your amplifier that increases audio purity
- Kit includes 20 8-gauge red power wire, 4 8-gauge black ground wire
- 20 16-gauge blue remote turn-on, 20 12-gauge speaker wire, 20 right angle RCA interconnect audio cable conduit.
- 6 black split loom cable conduit, AGU type 60A gold plated fuse
- Water-resistant in-line fuse holder
- 2 ring terminals\
Complete 1000W Gravity 8 Gauge Amplifier Installation Wiring Kit Amp PK1 8 Ga Red - for Installer and DIY Hobbyist - Perfect for Car/Truck/Motorcycle/RV/ATV
- High Quality Thick 17 Feet FT 8 Gauge GA Power Cable
- Premium 3 Feet FT 8 Gauge GA Ground Cable / Inline AGU Fuse Holder & 40A and 60A Fuse Included!
- True Sound 17 Feet FT Double Shielded RCA Cable
- High Quality 17 Feet FT / 18 GA Turn-On Cable & 20 Feet FT / 16 GA Speaker Wire
- All Accessories / Terminal Included! Perfect for Any Installer Shop, great for Car / Truck / Motorcycle / RV / ATV
Belva Professional Grade Complete 4 Gauge 2-Channel Copper-Clad Amp Wiring Kit Black with 2-Channel RCA Interconnects BAK42 (RED)
The Belva 4 Gauge Kit for Monoblock Amps!
If you need an amp kit at a great price then the Belva BAK42BK Complete 4 Gauge 2-Channel Amp Wiring Kit is for you. Belva uses Premium Powerflex power and ground wire that provides optimal power transfer and is made from Copper-Clad Aluminum. To provide signal from your head unit to your amp is the 2-Channel Helical Twist Construction Audio Interconnect RCA cables that minimizes noise and interference. The last key component is an In-line Mini-ANL Fuse holder with a 80 amp Mini-ANL fuse that offers ideal protection for high-powered systems. The BAK42BK is designed specifically for car audio systems up to 1000 watts RMS.Premium Powerflex wire
Copper-Clad Aluminum Wire
1-year Manufacturer's Warranty
Ground Wire Length 3 feet
Power Wire Length 17 feet
Includes 20 feet Speaker Wire
Primary Color: BLACK
- Complete 4 Gauge 2-Channel Amp Wiring Kit - includes everything needed to install one amplifier
- Designed specifically for car audio systems up to 1000 watts RMS
- In-line Mini-ANL Fuse holder with 80 amp Mini-ANL fuse offers ideal protection for high powered systems
- Made from 30 copper and 70 aluminum gives better power and signal transfer without interruption
- Premium powerplex power and ground wire which significantly give optimal power transfer
Carwires AIK-PS4000 4 Gauge Car Amplifier Wiring Kit
The Car wires AIK-PS4000 4 gauge car amplifier wiring kit includes all the wiring necessary to send audio and power to your car amplifier. All the wires in this kit meet or exceed the American Wire Gauge specifications and requirements. This kit is designed to work with amplifiers with a fuse rating up to 100 amperes. If youre ready to install like a pro, the included 15-step installation guide will take you from to start to finish!
- Amplifier Wiring Kit, designed for systems up to 1000 Watts Max Power
- FULL spec cable - meets or exceeds AWG (American Wire Gauge) standards
- (1) 17-foot 4-gauge power wire, (1) 30 inch 4-gauge ground wire
- (1) 17-foot twisted-pair audio cable, (1) 17-foot 18-gauge remote turn-on lead
- In-line AGU waterproof fuse holder with 100-amp fuse
- Kit includes assortment of wire termination hardware and cable ties
- (1) 4-AWG 5/16" Ring Terminal, (1) 4-AWG 3/8" Ring Terminal
- (2) 4-AWG Spade Terminals, (6) 4" Wire Ties
- 15-Step "Do it Yourself" Installation Guide
- Zero turn mower for hills
- The best wallets
- Car speaker brand
- Makeup for beginners
- Zero turn lawn mower for the money
- Corn for popcorn
- Dac for pc