How to install subs in car

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

Rockford Fosgate performance in a small package - this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Remote PLC (Punch Level Control) 0 /180 Phase Switch Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Standard Warranty

Buy how to install subs in car from Amazon.com
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz /-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with 18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system


Buy how to install subs in car from Amazon.com


Rockville dB55 4000w Peak / 980w RMS @ 2 Ohm CEA Compliant Mono Car Amplifier, Loud!

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

The dB55 is a 5 channel high power amplifier with 4,000 watts peak output, 2,000 watts RMS output, and 980 watts CEA-2006 rated power. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, and mute and delay soft start technology. The dB55 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

The dB amps by Rockville use the top parts and components recommended by Rockvilles very own engineer. These amps are the best sounding out of any series we have ever created. They perform more efficiently resulting in even dB of sound. We created them to be 2 ohm stable just like the worlds most famous amps by Rockford Fosgate, Kicker, etc. If you compare our amp to the most famous amps you will find our amp can compete and, in my opinion, surpass the performance of anything in its class.

Buy how to install subs in car from Amazon.com
  • Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner's manual. Mounting Screws. Warranty.
  • Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings. 2 Ohm: 120 Watts x 4 500 Watts x 1 <1 THDN. 4 Ohm: 80 Watts x 4 300 Watts x 1 <1 THDN.
  • RMS Power Ratings: 2 Ohm 240 Watts x 4 1000 Watts x 1. 4 Ohm: 160 Watts x 4 600 Watts x 1. 2 Ohm 480 Watts x 4 2000 Watts x 1. 4 Ohm: 320 Watts x 4 1200 Watts x 1.
  • High-Speed MOSFET Power Supply. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Low Pass Filter: (CH1-CH4)40Hz -4KHz /(CH5)50Hz -250Hz. High Pass Filter: 15Hz - 4KHz. Subsonic Filter: 15Hz - 55Hz.
  • Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >[email protected] 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9 x 2.4 x 18.6.








Buy how to install subs in car from Amazon.com


Rockville dB13 3000 Watt Peak / 750w RMS @ 2 Ohm CEA Compliant Mono Car Amplifier

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

The dB13 is a class D monoblock high power amplifier with 3,000 watts peak output, 1,500 watts RMS output, and 750 watts CEA-2006 rated power. All of the mono amplifiers in the dB series are 2 ohm stable. They are all CEA-2006 compliant, which makes it easy to compare this amplifier to other CEA compliant amps on the market. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. So we provided 3 ratings for all of our car amplifiers. We provided a CEA compliant rating, which you should use to compare this amplifier to other premium brands that make CEA compliant products such as Kicker, Rockford Fosgate, Kenwood, Pioneer, etc. We also supplied an RMS rating that is not CEA compliant, but has become standard in the industry. You should use this rating when comparing with ratings from brands such as Hifonics, Earthquake, DB Drive, etc. Lastly, we also supply a peak rating which almost all brands in the industry provide. This peak power is the amount of power the amp puts out at the loudest moments during a particular song.

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 . The dB13 features a Maxi fuse with a rating of 80 Amps. Although we rate these conservatively at 750 watts CEA @ 2 ohms, this amplifier puts out more power than this!

This amp has a fully adjustable 12dB/Octave crossover with differential circuitry. Other features include a subsonic filter, a fully adjustable bass equalizer, mute and delay soft start technology, a phase control switch, and a dashboard subwoofer control for added convenience. The dB13 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free music playback at all levels.

Buy how to install subs in car from Amazon.com
  • Includes:Amplifier, Bass Remote, Birth sheet with tested power. Owner's manual. Mounting Screws. Warranty.
  • Rockville dB13 3000 Watt/1500w RMS Mono Class D 2 Ohm Amplifier. CEA Compliant Power Ratings (Rated at less than 1 distortion). 2 Ohm: 750 Watts x 1 Channel <1 THDN. 4 Ohm: 450 Watts x 1 Channel <1 THDN.
  • RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc.). 2 Ohm: 1500 Watts x 1 Channel. 4 Ohm: 900 Watts x 1 Channel. 2 Ohm: 3000 Watts x 1 Channel. 4 Ohm: 1800 Watts x 1 Channel.
  • High-Speed MOSFET Power Supply. Optical Coupler Class "D" Technology. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Full IC-Controlled Protection Circuitry.
  • Minimum THD at Rated Power: <0.1. S / N Ratio: >90dB. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Frequency Response: 15Hz - 250Hz. Damping Factor: >150 @ 100Hz. 80 Amp Maxi Fuse. Dimensions: (W x H x L) 9 x 2.4 x 14.7.








Buy how to install subs in car from Amazon.com


Rockford Fosgate TMS69BL14 Power Harley-Davidson Rear Audio Kit (2014)

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

If you need more than just two speakers and want to really feel your music while riding then check out our add-on bag lid audio solution. Centered around our TMS69 6x9" speaker this kit is designed to work with your existing OEM bag lids. This means no extra parts to purchase or custom paint schemes to match. Easy to install using our included cutting template and two-piece mounting system you can quickly add on to an existing or new fairing audio kit using with the included plug and play harness. The harness plugs right into either our Power or Punch small chassis 4-channel amplifiers.

Buy how to install subs in car from Amazon.com
  • If you need more than just two speakers and want to really feel your music while riding then check out our add-on bag lid audio solution, the TMS69BL14, designed for 2014 factory Harley-Davidson hardshell bag lids
  • Add rear audio to your existing HD14-TKIT, with the TMS69BL14 rear audio kit, that is easy to install using our included cutting template and two-piece mounting system with the included plug and play harness
  • Also includes a pair of TMS69 Power Element Ready 6x9" full range speakers featuring 100 Watts RMS power and all installation hardware
  • These speakers are Element Ready, protecting against dust, UV, temperature, water, corrosion & vibration
  • Note: You will need to flash your factory radio to use this kit








Buy how to install subs in car from Amazon.com


Pioneer TS-WX130DA 160W Max Single 8" x 5-1/4" Sealed Under Seat Car Audio Subwoofer Enclosure w/ Built-In Amplifier Wired remote included / FREE ALPHASONIK EARBUDS

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

General Features: 160W Max Single 8" x 5-1/4" Sealed Under Seat Subwoofer Enclosure with Amplifier Power Handling: Peak: 160W RMS: 50W Total Final Impedance: 4ohms Preloaded with a single 8" x 5-1/4" Subwoofer Built-in Class D amplifier Wired remote included Sealed under seat enclosure Enclosure Dimensions: 7-7/8" D x 11" W x 2-3/4" H Authorized Internet Dealer 1-year Manufacturer's Warranty Subwoofer Features: Aluminum cone Heat resistant voice coil Frequency Response: 40 - 160 Sensitivity: 95dB Amplifier Features (IF POWERED): Class D amplifier Selectable bass modes: Deep or Dynamic Wired remote knob included Bullet

Buy how to install subs in car from Amazon.com
  • Extremely compact, yet powerful subwoofer system
  • 160 watt Built-in MOSFET amplifier
  • Wired remote to control gain, phase, and LPF
  • Enclosure size: (WxDxH): 11"x 7-7/8" x 2-3/4"
Buy how to install subs in car from Amazon.com


VicTsing Upgraded Bluetooth FM Transmitter for Car, Power Off Switch, Music Player Support USB Flash Drive/Micro SD Card/AUX Input, Wireless Radio Transmitter with 1.44'' Display,USB Charger - Gray

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

VicTsing Bluetooth FM Transmitter - 2017 New Model:

With 2 USB Ports and Multiple Play Modes,Flexible Rotations and Convenient Power On/Off Function,our car Bluetooth FM transmitter enables you to enjoy your favorite music and take hands-free calls for pleasurable driving experience!

Power On / Off
It will power on after you plugging the transmitter into the car cigarette socket.It will power off after you long pressing the power button for about 3 seconds. And long press the power button for about 3 seconds to turn it on. Make it more user-friendly.

Always the Perfect Viewing Angle
270-degree rotatable LCD display screen together with flexible gooseneck can be adjusted to suitable viewing angle conveniently.

Wide Compatibility
The FM transmitter works perfectly with most Bluetooth-enabled devices like iPhone 7 Plus/6/6S/6 Plus/5S/5C/5/4s, HTC and etc. With 3.5mm audio cable, the car FM transmitter also works with non-Bluetooth devices like MP3 player,old speakers and so on.

Effortless Operation
Simply plug the FM transmitter in the car cigarette socket,tune your car FM radio frequency to a blank station, and then tune the FM transmitter to the same frequency with your car FM radio. Connect cellphone with FM transmitter via Bluetooth or 3.5mm audio cable. Easy to control music, calls, FM frequency and volume via the respective buttons on it.

Specifications:
Bluetooth Version: V3.0 EDR
Effective Range: 5 meters
FM Frequency: 87.5MHz - 108.0MHZ
Audio Input/Output: 3.5mm audio interface
USB Charging Port: 5V/2.1A and 5V/1A

Package Included:
Car Bluetooth FM Transmitter 1
3.5mm Audio Cable 1
User Manual 1

Buy how to install subs in car from Amazon.com
  • Power On/Off and Dual-USB Ports Support.One Button to Power off,no need to worry about draining battery. Saves your effort of plugging or unplugging every time you start and go off your car. Equipped with 2 USB ports, One USB port is for car charge, maximum output is 5V/2.1A. Other USB Port Can Read USB Sticks (The top one) which can stream music.
  • Upgrade Model With 4 Music Play Modes: Firstly, the FM transmitter can play music from Bluetooth-enabled device to car stereo via FM signal. Secondly, It can stream music from TF card or U disk with a capacity of up to 32G. Additionally, it can transmit music from MP3 player, old speaker and tablet to the car stereo system via the provided 3.5mm audio cable if the device do not support Bluetooth function.
  • Goose-neck and Large 1.44" LCD Display Screen: You can rotate the LCD display screen in 270-degree and tilt the goose-neck for optimal viewing comfort. 1.44in LCD display screen clearly shows car voltage when plugged in, phone number for incoming call and song name when stream music from U disk or TF card.
  • Hands-free Calling and Memory Function. Built-in microphone, this V3.0 Bluetooth FM transmitter enables you to answer, hang up, reject a call or redial the last number with ease. Furthermore, the transmitter will automatically connect to its last paired Bluetooth device when powers on next time.
  • Universal Compatibility: VicTsing Bluetooth Transmitter perfectly works with Bluetooth enabled devices like iPhone, iPad, iPod touch, Smartphones,or other audio player devices via the provided 3.5mm audio cable such as MP3,MP4 Player and Bluetooth-enabled devices like iPhone 8,iPhone 8 plus, iPhone X, iPhone 7 Plus/6/6S/6 Plus/5S/5C/5/4s, HTC and etc






Buy how to install subs in car from Amazon.com


Rockford Fosgate P1683 Punch 6"x8" 3-Way Full Range Speaker (Pair)

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

Rockford 6x8" 65W RMX 130W PK 3WAY COA

Buy how to install subs in car from Amazon.com
  • FlexFit basket design
  • OEM adapter plate included
  • PEI dome tweeter
  • Nominal Impedance (Ohms):4-Ohm
  • 6-by-8-inch three-way speaker with 130 watts maximum power handling (65 watts RMS)
  • Mineral-filled & polypropylene injection molded cone with butyl rubber surround
  • PEI dome tweeter with built-in crossover
  • Flex Fit basket allows for variable adjustments to the mounting position
  • 65Hz - 24kHz frequency response; 90dB sensitivity

Buy how to install subs in car from Amazon.com


Power Home HiFi Stereo Amplifier - 90 Watt Portable Dual Channel Surround Sound Audio Receiver w/ 12V Adapter - For Subwoofer Speaker, MP3, iPad, iPhone, Car, Marine Boat, PA System - Pyle PFA300

Buy how to install subs in car
Check Price on Amazon
Buy how to install subs in car from Amazon.com

Description:

Pyle Model : PFA300

90 Watt Class-T Hi-Fi Stereo Amplifier

90 Watt Class-T Hi-Fi Stereo Amplifier with AC Adapter Included

  • 12V AC/DC Adapter
  • Class-T Circuit Design
  • Microphone Input Jack
  • Speaker Impedance: 2-8
  • 3.5mm iPod/MP3 Input Jack
  • Signal to Noise Ratio: >80dB
  • Total Output Power: 90 Watt
  • Input Power: DC 9 14.4V 2A
  • Total harmonic distortion: <0.4
  • Frequency response: 20Hz-20kHz
  • Short Cut, Overload & Overheat Protection
  • Dimensions: 6.02'' x 4.96'' x 1.5''

  • The PFA300 is a class-T digital amplifier with up to 90 watts of power. Use it in your car, your boat, your RV, your golf cart, your home anywhere you need a great amplifier with low distortion and acoustically accurate reproduction of music. Adjust the bass and treble to your liking, or bypass the included EQ. Takes 3.5mm stereo jack input or stereo RCA. 2-8 ohm speaker impedance compatible. Includes a 12 V DC adaptor.

    Buy how to install subs in car from Amazon.com
    • 90 WATT POWER: The Pyle Dual Channel HiFi Audio Amplifier gives your entertainment or PA system a boost! Offers low distortion & acoustically accurate audio reproduction. Supports speakers w/ 2-8 ohm impedance allows you to enjoy high-quality audio
    • CUSTOMIZABLE SOUND: It features tone & direct switch which allows adjustment of how much bass & treble get through to be amplified. By switching to direct the filters are removed from circuit & the signal coming in is amplified w/o any filtering
    • SUPPORTS MULTIPLE DEVICES:The professional class-T amp support various external devices. Connect android phone, iPhone, iPod & MP3 to the 3.5mm jack input & enjoy surround acoustic audio w/ the speaker. It also has microphone & AUX input for karaoke
    • EQ CONTROLS: This multi-purpose portable 2-channel compact home digital stereo receiver box features crisp buttons & rotary knob controls for audio adjustment. It also features a blue LED illuminated volume knob which also serves as a power indicator
    • BUILT-IN SAFETY FEATURES: Equipped w/ shortcut, overload & overheat protection to keep this amp & connected devices functioning properly & safely. The built-in loudspeaker protection circuit protects your speakers from high volume bursts of audio
    • WORRY-FREE SHOPPING: With the Pyle PFA300 updated version, we are confident of the quality of our product, therefore, we offer a 30-day money-back guarantee, no questions asked




    Buy how to install subs in car from Amazon.com


    Jusinhel Magnet Gun Mount for Truck Car Rubber Coated Concealed Magnetic Gun Holster with Strong Separated Adhesive and Screws Magnetic Holder for Handgun Shotgun with 35 Lb Rating

    Buy how to install subs in car
    Check Price on Amazon
    Buy how to install subs in car from Amazon.com

    Description:

    Now, here is the new generation of Jusinhel Gun Magnet, revolutionized the way you mount and store your firearms, for easy and allowing you to quick draw, easy retrieval of handguns, rifles and magazines.

    Easy and secure installation
    1. Unique design of high quality double side adhesive. Large weights can be suspended, you not need worry to destroy your precious car, bed, or desk
    2. Two Kinds of screws specification can be chosen, Plastic expansion bolt make install easy

    Highest Quality
    1. High grade Neodymium magnets rated at 35 lbs.
    2. Abrasion resistant soft thick high quality rubber coating cover protecting your firearms from any scratching.
    3. Provides a strong grip while also keeping your firearm straight,provent falling,moving or spinning.
    4. It has a large surface area for better grip with easy removal

    Specification
    Product Dimensions:3.8"L x 1.43"W x 0.4"H
    Product net weight:3.7oz

    Package Included:
    1 x Jusinhel Gun magnet
    3 x Super Double side adhesive
    4 x 1/2 inch screws
    4 x 1-1/4 inch screws
    4 x Plastic expansion bolt

    Fir for all firearm types and brands
    Available for Handguns, Rifles, Shotguns, Pistols, Revolvers and More;
    Smith & Wesson, Ruger, Springfield, Sig Sauer, Glock,
    Colt, Kel Tec, Heckler & Koch USP, Browning, Walther,
    Taurus, Remington, Beretta 92FS, Rossi .38 Special and More;

    Warranty
    45 days money-back and 12 Month Warranty, worry-free guarantee!

    Notice:
    1. Do not use it in a 176F or above temperature because the magnet will demagnetize.
    2. Firearms can be dangerous and should be kept out of reach of children.
    3. It is suggested to mount an unloaded gun or lock the safety.

    Buy how to install subs in car from Amazon.com
    • HIGH QUALITY MATERIAL: 35 Lbs rated,this gun magnet made of actual neodymium precious metal alloy and real rubber coating,hold your firearms in place and protecting from scratching, falling, moving or spinning.
    • EASY TO INSTALL: With screws and double side adhesive in package, two way can install your gun magent.High quality double side adhesive keep your gun hold in place you want without destroy anything.
    • WIDELY USED:This magnet gun holder fit for all most brands and firearm types,Available for Handguns, Rifles, Shotguns, Pistols, Revolvers and More;Install in anyplace you want, Car, Truck, Wall, Vault, Bedside, Doorway, Desk, Table, Safe.
    • PERFECT SIZE: Compact 3.8"L x 1.43"W x 0.4"H design is for easy hiding and concealed placement,you can install gun magnet in car,truck,under desk or bedside.
    • WHAT YOU GET:Jusinhel Gun Magnet holder,2 kinds of screws(4 pack for each),3 pieces seperated double side adhesive,free 12 Month Warranty and friendly customer service.








    Buy how to install subs in car from Amazon.com


    Kenwood DDX25BT 6.2" 2-Din in-Dash DVD Monitor Bluetooth Receiver Sirius/MP3/WMA

    Buy how to install subs in car
    Check Price on Amazon
    Buy how to install subs in car from Amazon.com

    Description:

    General Features
    6.2 inch Wide VGA Color LCD Display with LED Backlight
    Clear Resistive Panel
    Touch Panel Control
    White Key Illumination
    Background Customize
    Multi-Language Menu & Tag (22 Languages includin English, Spanish and French)

    Audio/Video Features
    Maximum Output Power : 50W x 4 (MOSFET Power IC)
    3 Preouts (2.5V)
    1 Rear Video Output (RCA)
    1Video Input for Rear View Camera
    Parking Guide Line
    13 Band Graphic Equalizer
    System E's (Built-in HPF & LPF)
    Loudness
    Installer & Backup Memory (Store & Backup Audio/Video Settings)

    DVD/CD Features
    DVD Video/R/RW Playback, MPEG 1/2 Video Playback
    VCD Compatible, MP3 / WMA / AAC / CD-R / -RW Playback
    CD Text Ready, Repeat / Random Play
    24 Bit D/A Converter

    Tuner Features
    Sirius XM Ready
    FM / AM 20 Station Presets (FM x 15, AM x 5)
    RBDS with Radio Text Plus
    AME (Automatic Memory Entry), Up/Down Seek Tuning

    USB Features
    USB Interface x 1 (Rear)
    MP3 / WMA / AAC / WAV / FLAC Playback, MPEG 1/2 Video / JPEG Playback
    iPhone/iPod USB Direct Connection with Optional Cable *1
    iPhone App Mode
    Pandora / iHeart Radio / Spotify App Ready (iPhone App)
    Android Music Play Back
    Android Rapid Charge

    *1: KCA-IP102 / KCA-IP103 (1 Wire) for iPod Music, KCA-IP202 (2 Wire) for iPod Music & Video

    External Media Control Features
    Built-in Bluetooth
    (Hands-Free Profile / Audio Profile (A2DP) (AAC) / SPP)
    Bluetooth Auto Pairing for iPhone, Android
    Dual Phone Connection
    Wireless Music Browsing
    Pandora / iHeart Radio/ Spotify App Ready (Android and iPhone App)
    OEM Remote Control Interface

    Buy how to install subs in car from Amazon.com
    • 6.2 inch Wide VGA Color LCD Display with LED Backlight
    • Built-in Bluetooth technology for hands-free talking and audio streaming
    • Power Output: Peak: 50 watts x 4 channels / RMS: 22 watts x 4 channels
    • Compatible with Apple iPhone 6/6 and iOS 8 software
    • Rear RCA Video Output: Used for connection to separate monitors and other devices



    Buy how to install subs in car from Amazon.com


    How to install subs in car