Alpine class d amp

Alpine MRV-M1200 Monoblock 1200 Watts RMS Class D Amplifier

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

ALPINE MRV-M1200 AMP 1 CHANNEL 2400 WATTS MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER NEW

Buy alpine class d amp from Amazon.com
  • Amplifier Type: Class-D (Digital) Channel Design: 1 Channel (Mono) Power Supply Design: DC-DC PWM Power Supply: MOSFET Pre-Amp Stage: Discrete Final Outputs: Power MOSFET Crossover: Variable Lowpass Filter
  • Gain Control: Continuously Adjustable Gain Control Remote Turn On: Remote Sensing Function (for Speaker Level Input) Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection Board Circuitry: S.T.A.R. Circuit RCA Output: Non-Fading Pre-Amp Output (4 Volts)
  • Speaker-Level Inputs: 4-channel Speaker Level Inputs Power Indicator: Top Mounted Blue LED Power Indicator Thermal Control: Multi-stage Power Limits Power Requirements: 14.4 V.DC (11-16V allowable) Input Sensitivity (RCA Input): 0.15 - 4.0 V Input Sensitivity (Speaker Level Input): 0.4 - 10 V Input Impedance: >10k ohms
  • Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz Damping Factor (10W into 4 Ohms at 100Hz): >750 Signal to Noise (1W into 4 Ohms): >85 dB Signal to Noise (Rated Power into 4 Ohms): >105 dB Preamp Output: 4.0V Max. Remote Level: -20 to 0 dB
  • RMS Power Ratings: Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1 THDN) Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1 THDN) Max Power Output Ratings: Total Max Power: 2400 W Dimensions: Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in Heat Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in








Buy alpine class d amp from Amazon.com


Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier Amp Kit

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

Features:

Alpine MRV-M500 500 Watt Mono Block Class D Car Amplifier
Fourth Generation V-Power Series
500 Watt x 1 Channel At 2 Ohm
300 Watt x 1 Channel At 4-Ohm
Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
EQ (Equalizer): 0 to 12dB, fc=50Hz
Power Requirements: 14.4 V.DC (11-16V allowable)
Input Sensitivity (RCA Input): 0.15 - 4.0 V
Input Sensitivity (Speaker Level Input): 0.4 - 10 V
Input Impedance: >10k ohms
Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
Damping Factor (10W into 4 Ohms at 100Hz): >500
Signal to Noise (1W into 4 Ohms): >85 dB
Signal to Noise (Rated Power into 4 Ohms): >105 dB
Remote Level: -20 to 0 dB
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Bass Control: Remote Bass Control (RUX-KNOB) Ready
Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
Low-impedance Possibility:Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: LED Power Indicator
Thermal Control: Multi-stage Power Limits
Bridgeable Amplifier
Includes Birthsheet For Power Verification
40 Smaller Chassis Design With Same Power
Class D Digital Amplifier
Snap-On Terminal Covers For Clean Install
Dual Internal Error Correction Tech
Compatible With RUX-KNOB for Bass Adjustment
Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit

Buy alpine class d amp from Amazon.com
  • 500 Watt Mono Block Class D Car Amplifier. Fourth Generation V-Power Series. 500 Watt x 1 Channel At 2 Ohm. 300 Watt x 1 Channel At 4-Ohm. Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct. EQ (Equalizer): 0 to 12dB, fc=50Hz. Power Requirements: 14.4 V.DC (11-16V allowable). Input Sensitivity (RCA Input): 0.15 - 4.0 V. Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms. Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. Damping Factor (10W into 4 Ohms at 100Hz): >500. Signal to Noise (1W into 4 Ohms): >85 dB. Signal to Noise (Rated Power into 4 Ohms): >105 dB. Remote Level: -20 to 0 dB. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Mounting Screw Terminals. Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono). Power Supply Design: DC-DC PWM Power Supply. Power Supply: MOSFET. Pre-Amp Stage: Discrete. Final Outputs: Power MOSFET. Crossover: Variable Lowpass Filter. Gain Control: Continuously Adjustable Gain Control. Bass EQ: Bass EQ Function. Bass Control: Remote Bass Control (RUX-KNOB) Ready. Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F


Buy alpine class d amp from Amazon.com


MRV-M500 - Alpine Monoblock 500W RMS V Power Series Car Amplifier

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

V-Power Series Class D Monoblock Digital Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. Max power output: 500 watts x 1 chan. Integrated wire and mounting screw terminals S.T.A.R. circuitry LED power (blue) and protect (red) indicators Variable Bass Boost (0 to 12 dB bass boost at 50 Hz) Soft start turn-on 4 or 2 channel operation 4-channel speaker-level inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink Input sensitivity: 0.4V - 10V Non-fading pre-amp output Variable low-pass filter (50-400 Hz, 24 dB/octave) CEA-2006 compliant amplifier

Buy alpine class d amp from Amazon.com
  • MRV-M500 - Alpine Monoblock 500W RMS Amplifier
  • Evolution to Class D digital platform
  • New snap-on terminal covers for easy installation
  • Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
  • Dimensions (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''


Buy alpine class d amp from Amazon.com


Alpine PK BBX-T600 BBX Series 600W 2-Ohm Stable 2 Channel Class A/B Amplifier w/Amp Kit

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com
Buy alpine class d amp from Amazon.com
  • Package: Alpine BBX-T600 4 Gauge Amp Kit
  • BBX-BT600: 600W Max (280W RMS) BBX Series 2-ohm Stable 2 Channel Class A/B Amplifier
  • RMS Power Rating: 4 Ohms: 50 Watts x 2 Channel, 2 Ohms: 70 Watts x 2 Channel, 1 ohm: N/A, Bridged 4 Ohms: 130 Watts x 1 Channel
  • Input sensitivity: .2V - 8V / Frequency Response: 5 - 50000 Hz / Total Harmonic Distortion (THD): <1 / Signal to Noise Ratio: 95dB
  • Variable high-pass filter: 80 - 1200 Hz / Variable low-pass filter: 50 - 500 Hz / Variable Bass Boost: 0 to 12 dB bass boost / Fuse Rating: 20A x 1




Buy alpine class d amp from Amazon.com


Alpine BBX-T600 140 Watt 2-Channel Amplifier

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

Alpine BBX-T600 2-Channel 140W RMS BBX-Series Amplifier

Buy alpine class d amp from Amazon.com
  • Features: Class-A/B 2-ohm Stable 2-Channel Amplifier. RMS Power Rating: 4 ohms: 50 watts x 2 chan. 2 ohms: 70 watts x 2 chan. 1 ohm: ------------N/A------------ Bridged, 4 ohms: 140 watts x 1 chan. Total power output: 600 watts. Pulse Width Modulated MOSFET power supply, LED power (green) and protect (red) indicators, Soft start turn-on, 2 or mono channel operation, 1 pair of preamp outputs to connect multiple amplifiers, 3-way protection circuitry (thermal, overload, and speaker short p







Buy alpine class d amp from Amazon.com


Alpine MRV-M1200 Mono 1200w RMS 2-Ohm Car Audio Stereo AmplifierAmp KitRemote

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

Raising The Bar
The new V-Power products are now Class D digital amplifiers, resulting in a huge efficiency gain versus their predecessors without draining your battery or your pockets. Class-D provides continuous clean power to your speakers, operating at 80 efficiency far greater than conventional Class A or B amplifiers. Translation: Enjoy cleaner bass, even during extreme power demands.

Features:

Alpine MRV-M1200 Mono 1200 Watt RMS 2-Ohm Car Audio Stereo AmplifierRemoteĀ 
Damping Factor (10W into 4 Ohms at 100Hz): >750
Signal to Noise (1W into 4 Ohms): >85 dB
Signal to Noise (Rated Power into 4 Ohms): >105 dB
Preamp Output: 4.0V Max.
Remote Level: -20 to 0 dB
Weight: 1.8 kg
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Bass Control: Remote Bass Control (RUX-KNOB) Ready
Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
Low-impedance Possibility:
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
RCA Output: Non-Fading Pre-Amp Output (4 Volts)
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: Top Mounted Blue LED Power Indicator
Thermal Control: Multi-stage Power Limits

Buy alpine class d amp from Amazon.com
  • Alpine MRV-M1200 Mono 1200 Watt RMS 2-Ohm Car Audio Stereo AmplifierRemote. CEA-2006 Power Rating: 600W RMS x 1 (4-ohm, 14.4V at <1 THDN). Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1 THDN). Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1 THDN). Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.. EQ (Equalizer): 0 to 12dB, fc=50Hz. Foot Print (WxHxD) mm: 342 x 55 x 219 mm.
  • Foot Print (WxHxD) in: 13-1/2'' x 2-1/4'' x 8-5/8''. Power Requirements: 14.4 V.DC (11-16V allowable). Input Sensitivity (RCA Input): 0.15 - 4.0 V. Input Sensitivity (Speaker Level Input): 0.4 - 10 V. Input Impedance: >10k ohms. Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. THDN (10W into 4 Ohms): 0.02 . THDN (10W into 2 Ohms): 0.03 . THDN (Rated Power into 4 Ohms): 0.2 .
  • THDN (Rated Power into 2 Ohms): 0.3 . Damping Factor (10W into 4 Ohms at 100Hz): >750. Signal to Noise (1W into 4 Ohms): >85 dB. Signal to Noise (Rated Power into 4 Ohms): >105 dB. Preamp Output: 4.0V Max.. Remote Level: -20 to 0 dB. Weight: 1.8 kg. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals. Amplifier Type: Class-D (Digital). Channel Design: 1 Channel (Mono).
  • Rockville RWK21 2 Gauge Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17' 2 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 4 Gauge Clear SuperFlex Ground Wire.
  • Gold Plated ANL Heat Resistant Fuse Holder. 150 Amp ANL Gold Plated Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F








Buy alpine class d amp from Amazon.com


Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

Rockford Fosgate performance in a small package - this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Remote PLC (Punch Level Control) 0 /180 Phase Switch Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Standard Warranty

Buy alpine class d amp from Amazon.com
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz /-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with 18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system


Buy alpine class d amp from Amazon.com


pkg Alpine MRV-M500 Monoblock 500W RMS MRV-F300 4-Channel 300W RMS Amplifiers

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com
Buy alpine class d amp from Amazon.com
  • MRV-M500 - Alpine 1-Channel 500W RMS 1000W Max V Power Series Car Amplifier
  • Dimensions: 6-1/2'' x 2-3/16'' x 7-7/8''
  • MRV-F300 - Alpine 4-Channel 300W RMS 600W Max V Power Series Car Amplifier
  • Dimensions: Dimensions: 7-7/8"W x 2-3/16"H x 7-7/8"D


Buy alpine class d amp from Amazon.com


Alpine MRD-M605 V12 Digital Mono Amplifier

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

Alpine MRD-M605 900 Watt (peak at 2 ohm) V12 Digital Mono Amplifier

Buy alpine class d amp from Amazon.com
  • Advanced Class-D Mono Amplifier
  • Digital Information Center
  • MOSFET Power Supply
Buy alpine class d amp from Amazon.com


Alpine MRV-F300 4-Channel Car Amplifier, 50 Watts RMS x 4

Buy alpine class d amp
Check Price on Amazon
Buy alpine class d amp from Amazon.com

Description:

75W RMS x 4 (2, 14.4V, 1 THDN) 50W RMS x 4 (4, 14.4V, 1 THDN) Same power in a 40 smaller chassis Evolution to Class D digital platform New snap-on terminal covers for easy installation

Buy alpine class d amp from Amazon.com
  • 75W RMS X 4 (2, 14.4V, 1 THDN)
  • 50W RMS X 4 (4, 14.4V, 1 THDN)
  • Same Power In A 40 Smaller Chassis
  • Evolution To Class D Digital Platform
Buy alpine class d amp from Amazon.com


Alpine class d amp