Bench drill press for the money

SKIL 3320-01 3.2 Amp 10-Inch Drill Press

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Skil 3320-02 10" Drill PressSkil Benchtop Power Tools are Quality Tools at a Great Price!Skil 3320-02 10" Drill Press Features: 3.2 amp motor LaserX2 2 Beam Laser System Depth Adjustment System Variable Speed-570-3,050 RPM 0-45 degrees left and right tilting work surfaceSkil 3320-02 10" Drill Press Specifications: Includes 10-in Drill Press with Laser Cast Iron Base and Work Table (2) AA Batteries Chuck Key

Buy bench drill press for the money from Amazon.com
  • 1/2-Inch keyed chuck. Bump-off switch for added safety
  • 5 Speeds - 570 - 3,050 RPM
  • Adjustable depth stop for accurate measurements and repetitive drilling
  • 0-45 Degree Left/Right Tilting Work Surface
  • Laser X2 2-beam laser for precise hole alignment


Buy bench drill press for the money from Amazon.com


Armor-Tool 3DP-70 Auto Adjust Drill Press/Bench Clamp, 3"

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Auto adjust drill Press clamp - features best automatic adjusting technology. Provides strong or light consistent tip clamping pressure and you have a free hand to hold the material. No spinning tip.

Buy bench drill press for the money from Amazon.com
  • Auto adjust drill press Clamps allow fast one hand clamping on drill press, machine tops or benches - 3" jaw.
  • Use mounting ring for bottom mount on drill press, or use 5/16 *18 button head T bolt for bench mounts
  • Features armor's "best in Class" auto adjust technology - set the pressure, and change material size without readjusting Clamp.
  • 25-400Lbs of consistent tip pressure over the 2.5" jaw opening range
  • Comfortable soft grip


Buy bench drill press for the money from Amazon.com


BUCKTOOL Drill Press 10 inch 5 Speed Laser Track Guided Bench

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Are you looking for a Drill Press? BUCKTOOL Drill Press meets your requirement!

This drill press has 10-inch swing, 5-speed. 2/3Hp motor is powerful enough to drill through aluminum, wood, plastics and metal. Laser alignment system, lock on your drill points can save your time to make on the material. 3 Bulbs LED light makes work safer in the dark place

Compare to hand held drill, this bench top drill press can drill hole more convenient and precise. Powerful 6.2Amp induction motor with deep ball bearings, makes your job much easy.

2-inch spindles travel and the '' chuck with JT33 spindle taper can handle most of the hobby jobs in wood working even metal working.

Worktable can bevel 45 left and right so you can have right angles consistently. The head table and base was made of cast iron. The base contains predrilled holes for mounting onto a bench or work stand. The slot on table can mount clamps and vises.

Product detail:

120V, 60hZ , 6.2Amp induction motor
5 Speed 610-2800
1/2 "" Chuck194
Table size: 7.646.5inch;  
Base Size: 13.4X8.19inch;
Spindle Travel 1.97inch;  
Drill Capacity: 1/2""13mm);
Column dia: 1.89 inch

Warranty

Please rest assured purchase, our drill press meets CSA standards and we can offer 1-year warranty. Please feel free to connect us if you have any problem about our products.

If you need more information, please search "Bucktool" in Youtube, you can subscribe us to get recent news.

Buy bench drill press for the money from Amazon.com
  • Includes: drill press, laser, LED light 1/2" keyed chuck & key, tools for assembly
  • 5 Speed design : adjustable drill speed from 610 to 2800 RPM
  • Built-in laser provides precise prediction of drilling location, with LED light. Beveling worktable can bevel 45 left and right, height adjusts by rack gear. It is easy and safe
  • 10-inch swing diameter, durable 6.2 AMP, 2/3 HP induction motor provides ample torque and power. The platform size is 191*165mm
  • This Drill Press meets CSA standards. We offer 1-year warranty






Buy bench drill press for the money from Amazon.com


Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

It's a drill press, tool holder and flex shaft holder all in one. Drill accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches.

Buy bench drill press for the money from Amazon.com
  • Articulating Drill Press- Drills Perpendicular and Angled Holes in 15-degree Increments, up to 90 Degrees Horizontal
  • Tool Holder- Holds Tool at 90 Degrees Horizontal for Tasks Such as Polishing Metal Objects, Sanding Different Shapes and Grinding Metal Piece. Drill Depth- 2 Inches
  • Flex Shaft Tool Stand- Allows Telescopic Adjustment to Any Height Between 16 and 29 Inches, Crow's Nest Provides On-board Storage for Drill Bits, Wrenches, and Other Dremel Accessories
  • Cord Management Clips - for Safe Storage of Power Cords, Inch/Metric Marking on Base - For Accurate Drilling of Workpiece, Depth Markings with Depth Stop - for Consistent Depth, Sturdy Metal Base with 4 Clamping Points - to Securely Hold the Station
  • Compatible with Dremel Rotary Tool models 100, 200, 275, 285, 300, 395, 398, 400, 800, 3000, 4000, 4200, 8100, 8200, 8220





Buy bench drill press for the money from Amazon.com


Proxxon 38128 TBM Bench Drill Machine

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Bench Drill Press TBM 115

Buy bench drill press for the money from Amazon.com
  • 110-120V, 65HZ, 85W comes with 6 steel collets size 1/32, 1/16, 5/64, 3/32, 7/64 and 1/8 inches (1.0, 1.5, 2.0, 2.4, 3.0, 3.2 millimeter)
  • Recommend clamp work pieces with Proxxon Machine Vise number 28132 or 24260
  • Convert this machine into a high precision machining center with use of 24256 Proxxon KT 70 Micro Compound Table
  • Optional Proxxon Original German Rohm Chuck umber 28122 available
Buy bench drill press for the money from Amazon.com


Shop Fox W1668 3/4 HP Bench-Top Oscillating Drill Press

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Shop Fox offers a broad assortment of drill presses to suit every needfrom small hobby shops to professional machine shops. Our unique oscillating models provide the convenience of two machines in half the space, and Our Radial drill presses offer unmatched versatility. For the best selection of features, performance, and value, Look no further than Shop Fox.

Buy bench drill press for the money from Amazon.com
  • Motor: 3/4 HP, 110-Volt, 1,725 RPM, Spindle Speeds 250-3050 RPM
  • Drill chuck: 5/8-Inch
  • Spindle travel: 3-1/4-Inch
  • Swing: 13-1/4-Inch
  • Includes a 3-piece spindle sander drum kit with a mandrel and 80 grit sanding paper to fit the 1-Inch, 1-1/2-Inch and 2-Inch drums.








Buy bench drill press for the money from Amazon.com


Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 each 3/8" Hold Downs and 2 Zero Clearance Table Inserts. Secures to Most Any Style or Size Drill Press

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today. The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter. That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top. Once attached the table can be moved or removed if necessary. The Fulton Drill Press Table is truly one of those items that every drill press owner should have!

Buy bench drill press for the money from Amazon.com
  • Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
  • The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits. Two tracks run front to back for jigs and fixtures and they accept any 3/8" hex head bolt.
  • Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter. That feature alone separates the Fulton Drill Press Table from the others
  • Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter.
  • That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.







Buy bench drill press for the money from Amazon.com


SE 3-Speed Mini Drill Press Bench

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

SE is proud to present our 3-Speed Mini Bench Drill. You can drill precise holes with this product. It is easier to use and more accurate than handheld drills. It is useful for craftsmen, hobbyists, jewelers, mechanics, and woodworkers for home and workshops.

Features of our 3-Speed Mini Bench Drill include:
(1) Working area dimensions: 6-9/16 x 6-9/16
(2) Base dimensions: 6-5/8 x 6-5/8
(3) Max drill height: 7-1/2
(4) Max drill capacity: 6 mm
(5) Spindle travel: 1
(6) Voltage: 110V/60Hz
(7) Wattage: 100W
(8) 3 Variable speeds: 0 to 5,000 per min. 0 to 6,500 per min. 0 to 8,500 per min.
(9) 3 wrenches
(10) 6 mm chuck key

Important: Avoid getting counterfeit items. Genuine SE products come with our SE logo on the packaging. SE products are quality items for extremely reasonable prices.

SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness this SE 3-Speed Mini Bench Drill has to offer.

SE is a registered trademark protected by US Trademark Law.

Buy bench drill press for the money from Amazon.com
  • Work area dimensions: 6-9/16" x 6-9/16"
  • Base dimensions: 6-5/8" x 6-5/8"
  • Max drill height: 7-1/2"; Max drill capacity: 6 mm
  • 3 Variable speeds per minute: 5000, 6500, 8000
  • Comes with 3 wrenches and 6 mm chuck key





Buy bench drill press for the money from Amazon.com


WEN 4208 8 in. 5-Speed Drill Press

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Remember when power tools were actually powerful? WENs 8-inch swing, 5-speed drill press is small but powerful enough to drill through metal, wood, plastics, and other materials. Max drill capacity is 1/2 in 1 thick cast iron. When you need accurate, repeatable holes, this tool will do the job more conveniently and precisely than a hand held drill. The perfect size for the shop and portable enough to take to the job. Constructed with a rigid frame consisting of cast iron: head, table, and base ensuring accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The chuck with JT33 spindle taper gives you versatility with a variety of bits. Worktable bevels 45 left and right for those tricky operations for the perfect right angles consistently. The base contains predrilled holes for mounting onto a bench or work stand. The slotted table allows for mounting clamps and vises for effective workholding. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill holes in any material with ease? Remember WEN.

Buy bench drill press for the money from Amazon.com
  • Includes a 1/2-inch keyed chuck and onboard key storage
  • Operates at 5 different speeds: 740, 1100, 1530, 2100, 3140 RPM
  • Spindle travels up to 2 inches with easy to read, locking linear depth stops for accurate and repeatable drilling operations
  • Durable 1/3 HP induction motor develops ample torque and power
  • 6-1/2 x 6-1/2" worktable is height adjustable and bevels up to 45 degrees left & right
  • Swing: 8 inch. Motor: 120V, 60Hz. Horsepower: 1/3 HP.




Buy bench drill press for the money from Amazon.com


WEN 4214 12-Inch Variable Speed Drill Press

Buy bench drill press for the money
Check Price on Amazon
Buy bench drill press for the money from Amazon.com

Description:

Remember when power tools were actually powerful? WENs 12-inch swing, variable speed drill press with laser centering device, is a powerhouse for your shop. Packed with features that youll find in larger more industrial type drill presses. This bench-top, cast iron drill press has the power to drill through metal, wood and other materials. Max drill capacity is 5/8 in 1 thick cast iron. The variable speed feature allows you to target in the exact speed (infinitely from 580-3200 RPM) that works for your project. While you are working you simply move a lever and adjust the speed as needed. No pulleys and belts to change! Our design uses a mechanical variable speed which allows for the same power and torque through the entire speed range. A digital readout powered by LEDs displays the running speed. Constructed with a rigid frame consisting of cast iron: head, table, and base, ensures accurate holes. Its powerful induction motor features ball bearings for an extended life and it all comes together with smooth and balanced performance even at high speeds. The 5/8 chuck with MT2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. Worktable bevels 45 left and right for those tricky operations for the perfect right angles consistently. Base has predrilled holes for mounting onto a bench or work stand. Slotted table allows for mounting clamps and vises for effective mounting. The X-pattern laser locks-on to your drill points saving on guesswork and sparing expensive materials. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc. Since 1951, WEN has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Remember when you could drill with laser precision? Remember WEN. DO NOT use power tools in the presence of flammable liquids or gases

Buy bench drill press for the money from Amazon.com
  • Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed.
  • Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations
  • Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III
  • 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right; From the Tip of thechuck to the table lowered of the table 12 3/4"
  • Includes drill press, mechanical variable speed, laser, table roller extension, 5/8" keyed chuck & key, tools for assembly




Buy bench drill press for the money from Amazon.com


Bench drill press for the money