Cutting hole in glass

Hole Pro X-305 1-7/8" to 12" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Adjustable hole cutter kit

One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.

Twin blades with infinite adjustment 1-7/8" to 12" for faster cutting of recessed light cans and most ceiling speakers with perfect balance.

Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides

No need for balance bars which can break off

Kit includes
-Pro grade adjustable hole cutter
-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings
-Sturdy Carry Case
-Replaceable blade sets of BOTH HSS (located in the upper right hand corner of the carry case) for wood, plastics, acoustic tile, tongue & groove, laminates, rubber AND TUNGSTEN CARBIDE blades (installed in the hole cutter) for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
-hex wrenches

The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.

Please visit www.holepro.com for product videos and details about our products.

Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint exists

Cut holes in plywood up to 8" in diameter with 18 volt cordless drill

Like all Hole Pro Power Series kits the safety dust shield (14" OD) can be used with the Hole Pro XL-Arbor kit (HP1168 -NOT INCLUDED) to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as the adjustable hole cutters

5 year warranty against defects (except when used in commercial drill presses).

Do NOT USE with STUD DRILLS

NOT MADE FOR USE WITHOUT PILOT BIT

Buy cutting hole in glass from Amazon.com
  • Twin blades for faster/smoother cutting, strong shield traps dust & controls cutting depth
  • User replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
  • Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
  • 14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
  • Complete kit - add your 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut







Buy cutting hole in glass from Amazon.com


BLENDX Diamond Hole Saws Kit -Tile and Glass Hole Saws Cutting Drill Bits for Bottle, Ceramics, Porcelain 1/4" - 2" (6-50mm) - 10 Pack

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

BLENDX Diamond Drill Bits:
Diamond Drill Bits, are also know as Diamond Core Drill Bits, Diamond Hole Saws or Bonded Diamond Drill Bits. They are often called Glass Drill or Tile Drill, but they are much more versatile since they are used to drill glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone, and fiberglass.

Description:
Material: steel
Good Performance and long life.
Excellent for making clean and accurate hole on glass and tile.
Works better with a electric drill (Excluding in the item).
Size(outside diameter): 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm.
Total length: about 5.2cm
Applicable Industry: Suitable for Stone, Tiles, Ceramics, Glass and Granite, etc Processing.

Use note:

1. Start your hole diagonally, make a round trace and then hold drill straight.
2. Always use lubrication (water), otherwise the diamond core drill will burn.

Package Includes:
10pcs * Diamond Coated Drill Bit

Buy cutting hole in glass from Amazon.com
  • Diamond hole saw / core drill style bit.
  • 10 Sizes: 6mm, 8mm, 10mm, 14mm, 16mm, 18mm, 22mm, 35mm. 40mm, 50mm
  • Application: Drill Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone
  • SPEED KILLS: Reduced drill speeds, low drill pressure and increased use of water lubrication will extend drill bit life considerably
  • Warrnings: Not for use on Concrete or for depths beyond about 1/2"; Enough water is MUST HAVE for lubrication and cooling when drilling





Buy cutting hole in glass from Amazon.com


4 1/2 Inch Diamond Hole Saw Diamond Tipped Porcelain Tile Ceramic Glass 4.5 Inch Hole Saw Drill Bit Standard Shank Easy To Use by DRILAX

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Rare Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 1/4" in depth.

Shank size is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guide

Buy cutting hole in glass from Amazon.com
  • 4 1/2" Diamond Coated Hole Saw Drill Bit. You will get a perfect 4.5 inch hole through some really tough material.
  • Right size for drilling a hole through tiles for new toilet. Cuts Through Ceramic, Porcelain, Glass, Marble, Granite
  • Wet Type. Do not use dry. Pour water orĀ built a dam around the cutting area with plumbers putty and fill it with water
  • Drills 1 inch deep.
  • There is no need for a Pilot Drill Bit.Ā  Pilots are not safe for glass.









Buy cutting hole in glass from Amazon.com


1-1/2" 38.4 mm DiamondSure Diamond Drill Bit Hole Saw for Glass, Tile, Granite, Ceramic, Stone, Porcelain

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

* DiamondSure bonded diamond core drill bits cut through materials where other bits fail. They are designed to drill in the hardest surfaces or the most delicate and fragile. * DiamondSure bits can be used in any standard variable speed drill. They are electroplated, blonded and designed for drilling to depths of about 1/2" in ceramic tile, porcelain tile, glass block, slate, marble, quartz, granite, limestone and more! Not designed for use on concrete, masonry, metal or for use with impact hammer drills.

Buy cutting hole in glass from Amazon.com
  • DiamondSure bonded diamond core drill bits cut through materials where other bits fail.
  • They are electroplated
  • Not designed for use on concrete, masonry, metal or for use with impact hammer drills.




Buy cutting hole in glass from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set Hole Saws for Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool Ceramic, Porcelain Tiles, Glass, Marble, Granite Hole Sizes 1/4", 3/8", 1/2" (0.5 Inch) , 3/4" , 1", 1 1/4", 1 3/8", 1 1/2", 1 3/4", 2"

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Drilax Diamond Drill Bit - Hole Saw Set of 10 Pieces All Popular Sizes from 1/4 to 2 Inch for Wet Cutting Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles, Quartz Sinks, Lot 10 Diamond Coated Core Hole Saws- Kitchen, Bathroom, Shower, Faucets

10 Popular Sizes: 1/4 to 2 - Elegant storage case.

High Quality Diamond Drilling Tool Set of 10 Different Sizes: 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2

Popular 10 Sizes - Great Value

No need for Center Pilot Drills

Please Do NOT Use Dry

Maximum 3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guides

Buy cutting hole in glass from Amazon.com
  • Diamond Drill Bit Tools 10 pcs Set 1/4, 3/8, 1/2, 3/4, 1, 1 1/4, 1 3/8, 1 1/2, 1 3/4, 2
  • Best value set in durable zipper case. Great gift idea for any DIY lover.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Diamond Coated Tools will work best if you use water to keep the tools cool. Pleasedo NOT run dry.
  • Shank size is 3/8 - suitable for all common electric drillers. Max depth 1 inch.





Buy cutting hole in glass from Amazon.com


Hole Saw Set,7Pcs Diamond Drill Bits with Hole Saw Guide Jig Fixture, 1/1.2/1.6/2.4/2.8/3.15 inch Coated Core Drill Bits, Adjustable Hole Saw Centering Locator Suction Holder for Glass,Ceramics,Tile

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Diamond Hole Saws:
Material: high quality steel, diamond dust coating
Color: Silver
Size: 26-80mm/1"-3.15" 26mm(1 inch), 30mm(1.18 inch), 40mm(1.5 inch), 50mm(2 inch),60mm(2.36 inch),70mm(2.76 inch) 80mm(3.15 inch)
Quantity: 7 pcs

Hole Saw Guide:
Material: rubber base plastic shell steel
Minimum Drill Bit Dimension: 1/8"
Maximum Hole Saw Dimension: 3-1/4"

Two Fixing Modes Available:
Mode 1, Adjustable Plate Obverse Side: You can fix your hole saw with 4 bearing balls,for sizes up to 3-1/4 inches
Mode 2, Adjustable Plate Reverse Side: Place the plate reversely then remove one bearing ball to the bearing hole, you can fix your hole saw with 3 bearing balls,for sizes up to 1-3/4 inches

Warnings:
1.If you smell burning, back off! Either your speed is too high or the pressure you're applying is too much.You're drill bit should never be hot to the touch, not even warm.
2.Not for use on Concrete or for depths beyond about 1/2".
3.Water is required for lubrication when drilling.

Package Includes:
1 Pcs Hole Saw Guide Jig Fixture
7 Pcs Diamond Coated Drill Bit

Buy cutting hole in glass from Amazon.com
  • 7 Sizes Diamond hole saw : 26mm,30mm,40mm, 50mm,60mm,70mm,80mm,made of high strength carbon steel makes these diamond drill bits durable.
  • The diamond hole saws coated with high quality diamond,enhance the drilling speed and creates a sharp, high precision and smooth cut with no broken edges in seconds.
  • Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws.
  • Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes on tile, glass, marble, countertop, granite, etc.
  • Drilling holes for Glass, Tile Bottles, Blocks Jars, Fiber Glass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone






Buy cutting hole in glass from Amazon.com


16 pcs Diamond Hole Saw Drill Bits Rotary Hole Saw Drill Bit Glass and Tile Hollow Core Drill Bits Extractor Remover Tools for Marble Glass Ceramics Porcelain Granite Stone HKD04-US

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Specifications:

Material: high quality steel
16 Sizes :
6mm/0.23"
8mm/0.31"
10mm/0.39"
12mm/0.47"
14mm/0.55"
16mm/0.62"
18mm/0.7"
22mm/0.86 "
35mm/1.37"
40mm/1.57"
45mm/1.77"
50mm/1.96"

HOW TO USE

Step1:Use pen to mark start of hole,Please always remember to use water for lubrication, or the diamond core drill will burn.
Step2:Angle drill 45 degrees to start hole with a slowly speeds
Step3: Please cut a small mark first to locate the center,then you can cut the material vertically.

Note:Slowest Speed & Minimum Pressure & Adding Water for Lubrication

Buy cutting hole in glass from Amazon.com
  • Made of high-strength steel and high-quality corundum powder, and fine workmanship; durable, high precision machining, smooth appearance, heavy quality.
  • 16 pieces a set diamond drill bits, hole saw core drill style bit. 16 Sizes: 6mm 8mm 10mm 12mm 14mm 16mm 18mm 20mm 22mm 25mm 28mm 30mm 35mm 40mm 45mm 50mm
  • Versatile Applications: This Set Diamond Hole Saw bits with 16 different sizes which allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass.This diamond coated core drill bit removes a complete circle from glass, tiles, marble, granite.
  • Practical and Useful: Suitable for Lithium Drill, AC Drill, Hammer Drill, Drill Press and so on,it could cut the glass,ceramics,ceramic tile,slate,marble etc easily and quickly
  • PLEASE ATTENTION: Please keep adding water to keep the drill cool, speed under in 800-1000 per minute ,strictly PROHIBIT dry drilling!



Buy cutting hole in glass from Amazon.com


Drilax 10 Pcs Diamond Drill Bit Set 5/32", 3/16", 1/4", 5/16", 3/8", 1/2" , 5/8" , 3/4" , 7/8" , 1" In Inch Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles Lot Coated Bits DIY Kitchen, Bathroom, Shower, Lamps 100425

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 in depth.

Shank sizes vary smallest 5/32" and the largest shank is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

You may want to invest in a Drilax Drill Bit Guide with support bearings, suction base and integrated coolant hole

Buy cutting hole in glass from Amazon.com
  • GREAT SET with 10 Mostly Used Sizes: from 5/32" in to 1 inch
  • HUGE COST SAVINGS compared to big box stores. Use with standard electric or battery drillers.
  • There is no need for a center pilot drill. These tools do not have center pilot drills. Use a guide
  • Tiles, Glass, Fish Tanks, Marble, Granite, Ceramic, Porcelain, Bottles
  • FOR ALL DRILLS - HAND - PORTABLE - UPRIGHT - Shank sizes vary, maximum shank is 3/8








Buy cutting hole in glass from Amazon.com


Drilax 3-1/8" Diamond Drill Bit Hole Saw Ceramic Porcelain Tile Glass Marble Granite Quartz Cutting Coated Circular Saw Tip Wet Drilling Core Grit 3 1/8 Inches in (Larger Than 3") Drilax010080

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

Rare Size - Great Value

This Tool Does NOT Have Center Pilot Drill

Do NOT Use Dry

3/8 inch Shank Size

Can be used with Handheld or Upright Drillers

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 " in depth.

Shank size is 3/8" - common electric or rechargeable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Amazon sells DRILAX Diamond Hole Saw Guide

Buy cutting hole in glass from Amazon.com
  • Diamond Coated Drilling Holesaw Tool 3 1/8" - Slightly Larger Than 3 inches
  • Cuts Through Ceramic and Porcelain Tile - Glass, Marble, Granite
  • Use with Any Electric Drill - Diamond Circular Hole Saw for Floor Drain, Shower, Shower Mixing Valve, Shower Drain Installation
  • Drills 1 inch deep - Wet Type - Do not use dry - No Pilot Drill Bit - Pilots are not required
  • Circular Shank 3/8" - Can be used with Drilax Diamond Hole Saw Guide
Buy cutting hole in glass from Amazon.com


Drilax 2-1/2 Diamond Drill Bit Hole Saw for Ceramic, Porcelain Tiles, Glass, Fish Tanks, Marble, Granite, Quartz Diamond Coated Circular Saw - Kitchen, Bathroom, Shower, Faucet Wet Drilling Tool 2.5 Inches in Drilax010065

Buy cutting hole in glass
Check Price on Amazon
Buy cutting hole in glass from Amazon.com

Description:

The diamond particule coating on DRILAX hole saws give superior performance and lifetime. Please note our tools do not need center pilot holes. Center pilot hole drills are mostly for wood, metal, etc.

Drilax tools can drill 1 1/4" in depth.

Shank size is 3/8" - common electric or rechargable drillers can be used.

Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry. Here is how you could use water to keep the tool cool:
a- You can build a mini water dam around the hole with plumbers putty.
b- You can choose to spray water on the drill bit.
c- Or you can use running water to cool the drill bit.
EASY TO USE
Center pilot drill bits are for wood, metal, etc.; Here is how you can keep the drill bit on target:
a- You can make your own guide out of plywood - plastic or even a card board. All you need is to keep the drill bit in place until it makes the initial marks.
b- You can start drilling at an angle, with the edge of the drill bit making a C slot and then getting the drill bit up to vertical.
c- You can manually guide the drill bit with wet sponge.

Please use protective gear.

Buy cutting hole in glass from Amazon.com
  • Durable Diamond Drilling Holesaw Tool 2 1/2" - 2.5 inches
  • Over 80 cost savings compared to big box stores. Use with standard electric or battery drillers.
  • There is no need for a center pilot drill. These tools do not have center pilot drills.
  • Do NOT run dry. Diamond Coated Tools will work best if you use water to keep the tools cool.
  • Shank sizes vary, maximum shank is 3/8" - suitable for all common electric drillers.


Buy cutting hole in glass from Amazon.com


Cutting hole in glass