Goliath welded steel Christmas Tree Stand for Trees 5 to 12 Foot
Goliath welded steel Christmas Tree Stand For Trees 5 to 12 Foot 7 inch max Trunk size 28 inch Leg Span .9 gallon water capacity 4 steel support screws with steel end caps Powder Coated Steel Lifetime Warranty Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Don't settle for a weak undersized plastic Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy! We ship via UPS Ground out of Chicago 1 to 4 days to the lower 48 states.
- For Trees up to 12 Foot, 7 inch max Trunk size, 28 inch Leg Span, .9 gallon water capacity, 4 steel support screws with steel end caps, Powder Coated Steel, Lifetime Warranty
Krinner Tree Genie Tree Genie XXL Christmas Tree Stand, Green
Krinner's Christmas Tree Genie XXL comes with the greatest KRINNER inventions. No assembly required - no screws to tighten. The tree stand is equipped with the inventor's original single cable operation and a fully automatic water level indicator that takes the guessing out of watering your tree. Just place your tree in the opened stand on the spike, hold it straight and pump the foot pedal until the claws firmly hold the trunk. Done! Made in Bavaria - for a fool proof Christmas! You will find all technical details, more information and downloads on Krinner's website: www.krinnerusa.com.
- Simply pump the foot pedal Set up your Christmas tree in less than a minute! No assembly required, no screws to tighten!
- 20" (52cm) diameter extra-large tree stand, base weight 18 lbs. (8kg).
- Secures any tree up to 12 feet tall and trunks with 7 inches in diameter.
- Retains 2.5 gallons (11L) of water with automatic water level indicator.
- Made in Germany
Goliath welded steel Christmas Tree Stand for Trees 8 to 16 Foot
Goliath welded steel Christmas Tree Stand For Trees 8 to 16 Foot 9 inch max Trunk size 42 inch Leg Span 1.8 gallon water capacity 4 steel support screws with steel end caps Powder Coated Steel Lifetime Warranty Tired of your Christmas Tree falling over and Breaking your priceless family Christmas Tree Ornaments? Don't settle for a weak undersized plastic Christmas Tree Stand. Buy a GOLIATH Christmas Tree Stand! Made from heavy duty powder coated steel and backed by a lifetime warranty, GOLIATH Tree Stands are truly the last Christmas Tree Stand you will every buy!
- For Trees up to 16 Foot, 9 inch max Trunk size, 42 inch Leg Span, 1.8 gallon water capacity, 4 steel support screws with steel end caps, Powder Coated Steel, Lifetime Warranty
JACK-POST Welded Steel Christmas Tree Stand, For Trees Up to 12-Feet, 1.7-Gallon Water Capacity
Jack-post Corporation is an industry leader in manufacturing outdoor furniture and Christmas tree stands, founded in 1964.
- Fits up to 12' tree with 7" trunk
- 29.75" leg span
- 1.7 gallon water capacity
- 4 T-nut tipped eye bolt welded tubular steel Christmas Tree Stand. Use for up to a12-foot tree, 6.25-inch trunk, 4-legs with a 29.75-inch base. Easy to fill 1.7-gallon oversized water bowl.
- 4 eye-bolts hold tree trunk securely. Steel spike base for stability. Tubular steel legs will not flex under the load of heavy trees. Corrosion-resistant 'gold tone' zinc-dichromate hardware.
- U.S. Patent U.S. D 451, 8395
- Powder coated finish resists corrosion and adds durability
- Four heavy duty eyebolts hold tree in place
Jack Post Heavy Duty Iron Mountain Christmas Tree Stand - for Real Live Trees Up to 12' Tall
Avoid a Christmas tree disaster by using this strong and sturdy stand. Outperforms any other Christmas tree stand on the market. Accommodates live trees up to 12 feet tall. Features:. Can be used for trees that have up to 7" diameter trunks. Easy fill bowl holds 1.6 gallons (6.4 Liters) of water. 3/8 heavy duty eyebolts hold tree in place. 10" (25.4 cm) leg span. No tools needed for assembly. Heavy gauge welded steel will not crack or split. Textured powder coat finish, resists corrosion, adds durability Dimensions: 25"W x 11"H. Material(s): metal
- Heavy Duty Iron Mountain Christmas Tree Stand - For Real Live Trees Up To 12' Tall
- Perfect for trees up to 12 feet tall
- Can be used for trees that have up to 7" diameter trunks
- No tools needed for assembly
Heavy Duty 8 Brace Christmas Tree Stand. This New and Improved Stand For Big Chrsitmas Trees!
Large Heavy Duty 8 Brace Standtastic Adjustable Christmas Tree Stand is designed to hold big Christmas Trees in homes with high ceiling, churches, offices, country clubs and other places where stability and reliability are required. All Brace Mounts, Brackets, Braces, screws and hardware are supplied. You will need a ratchet, a 7/16 and a 9/16 socket, screwdriver, drill and 3/8th bit. You will supply a 4'x4' sheet of " plywood or 1/2" plywood doubled with a piece of 2x4 that has a 1" hole drilled through firmly attached in the middle of the plywood sheet. A lag bolt is screwed into the bottom center of the trunk to leaving a 1" Peg assembly. The Peg assembly will be inserted into the 1" hole in the 2x4 to keep the tree centered on the plywood. The Brace Mounts are screwed to the plywood to provide the connection points for the Braces. The Braces will swivel up to the tree and attach using wood screws. You must supply your water container. For a water container you can recycle a 10" tall bucket like the one used for paint and pool chemicals or use a 16"x16" wide and 12" tall plastic storage box. The lag bolt and seals compress against the tree trunk to form the leak proof seal. We provide the neoprene seals necessary to make a leak proof connection between the tree and water container. The weight of the tree will rest on the Peg assembly against the Plywood while the water container is fixed above the plywood on the Peg assembly. If the Christmas tree needs straightening simply loosen all of the Brackets at the Mounts using the 7/16 socket and gently slide to straighten and tighten.
- Click on Safe Christmas Products to see our 91 Positive Customer Rating.
- New & Improved Lifetime Heavy Duty Stand For Big Christmas Trees up to 16' Tall.
- All of the Weight of Heavy Trees Rest on Steel Center Pin, Not the Plastic Bowl. Double Neoprene Seals Insure Leakproof Connection to the Tree.
- Using Your Plastic Container or Paint Bucket Saves You the 20-30 cost of a Container & Shipping a Box of Mostly Air.
- Orders by 3 PM CST Mon-Fri Ships Same Day. USPS Priority Express Next Day to Most Locations for 35.
Handythings Christmas Tree Stand, for Trees Up to 8-Feet, 1.3-Gallon Water Capacity
This Jack-Post Christmas Tree Stand is a large capacity tree stand for trees up to 8-feet tall and up to 6-inch trunk diameter. Made of plastic, this tree stands holds 1-gallon of water (without the tree), has a spill-catcher edge and is 19.5-inches in diameter. Stabilizing spike. Eye-bolts thread steel nuts for strength and smooth operation. Corrosion resistant 'gold tone' zinc-dichromate hardware. Made to last! 5-year limited warranty.
- Medium, 5 Eye-Bolt, 1.3 Gal Tree Stand
- 8' Tree, 6" Trunk, 19" Base
- 5.5" Bare trunk needed, steel spike base plate
- Color label, master carton
Good Tidings C148E Stand Express Tree with Ratcheting Fastener System, 10-Foot Black
CNCC148E Features: -Tree stand.-Keep your holiday tree stable this season.-Unique design saves more bottom branches.-E-Z Fill extra large water reservoir with spill guard feature.-Easily accommodates crooked, uneven, and irregular tree trucks.-Elevated center on bottom of stand never touches floor.-Improved patented reservoir with spill guard can hold up to 8 quarts of water.-Prevents rocking and condensation.-Only 4.5" clear trunk. Dimensions: -Overall dimensions: 8" H x 20" W x 20" D.
- 10-inch tree stand
- Suitable for trees up to 10-feet tall with a 7-inch diameter trunk
- Improved patented reservoir with spill guard can hold up to 8 quarts of water
- Only 4.5-inch of clear trunk required
Cinco C-148E Express Tree Stand For Up To 10' Trees, Medium
For real trees up to 10 foot (3.05 meter) tall. The push-pull ratchet mechanism makes set-up and take-down easier than ever. Three strong galvanized pins in the center of the stand's base help to lock and centralize the tree before final adjustment. A clean leather cloth finish is used on the Express stands together with a deep spill guard and reinforced screw holes.
- Stand Size: Medium
- For real trees up to 10ft (3.05 m) tall
- Trunk diameter 7" (17.78 cm)
- 2 Gallon (7.57 lts) water reservoir
13' - 20' Christmas Tree Stand
12XTS Features: -Supports trunks up to 12'' in diameter.-Supports trees from 13' to 20' tall.-Holds up to 4 gallons of water.-Unique T-bolt handles for easy tightening, straightening and easy set up.-Bowl weighs 44 lbs.-Legs weigh 22 lbs. Color/Finish: -Regal red color. Assembly Instructions: -*Note* This stand requires some assembly. Dimensions: -Shipping Box Dimensions: (Box #1) 15'' W x 15'' D x 11'' H (Box #2) 36'' W x 4'' D x 4'' H.
- Package Quantity: 1
- Excellent Quality.
- Great Gift Idea.
- Satisfaction Ensured.
- Produced with the highest grade materials
- Iced coffee concentrate
- Hdmi 4k cable
- Flip out radio
- How to lock a trailer hitch
- Running shoes india
- The best vinyl machine
- Lego kits