300 watt rms amplifier

Rockford Fosgate R500X1D Prime 1-Channel Class D Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.

Rockford Fosgate performance in a small package - this Prime Series R500X1D mono amp can drive a sub with up to 500 watts RMS, so you can really feel your bass rockin'. You can use the low-pass filter and Rockford Fosgate's famous Punch boost to get the best possible bass from the sub and enclosure in your vehicle. A phase switch gets your subs firing along with your other speakers for maximum impact, while the speaker-level inputs let you hook this amp up to almost any system, even a factory stereo.

Remote PLC (Punch Level Control) 0 /180 Phase Switch Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on 1 Year Standard Warranty

Buy 300 watt rms amplifier from Amazon.com
  • 300 Watts x 1 @ 4-Ohms, 500 Watts x 1 @ 2-Ohms, Frequency 20Hz to 250Hz /-1dB
  • Onboard 12dB/octave LP/HP/AP crossover & Infrasonic filter. Power Wire Gauge- 4 AWG. Power Input Connector-Screw Terminal. Suggested Alternator-75 A
  • On-board Punch EQ with 18dB boost at 45Hz. Input Sensitivity: 150 mV to 4 V
  • Cast Aluminum Heatsink with Stealth top mounted control panel
  • Includes wired remote (Punch Level Control). High efficiency amplifier design that reduces current consumption from the charging system


Buy 300 watt rms amplifier from Amazon.com


Monoprice 300-Watt (150w RMS x2) Studio Audio Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Add 300 watts of clean and stable power to your studio rack using this 300-Watt Studio Audio Amplifier from Monoprice!

This rack-mountable switching Class D amplifier packs 300 watts of power into a compact form factor, which takes up only 1U of rack space. It can be used as a stereo amplifier or can be bridged for mono mode.

In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load. When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load. Additionally, it is stable when using reactive or mismatched loads, so for example, you can connect a 2-ohm speaker to one channel and an 8-ohm speaker to the other without any problems.

It features an extremely flat 20Hz 20kHz (0, -1dB) frequency response with less than 0.05 THDN and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection. It also features power on/off muting function to prevent popping in the speakers when power is turned on or off. There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.

Features:
Class D amplifier
High current switching power for high power output, low noise, and low distortion
Extremely flat 20Hz 20kHz (0, -1dB) frequency response with less than 0.05 THDN
Balanced 1/4" TRS and XLR inputs
Unbalanced 1/4" TS and NL4 speaker twist speaker outputs
Built-in optional limiter helps prevent clipping
Short circuit, open circuit, thermal, ultrasonic, and RF protection
Stable with reactive and mismatched loads
Power on/off muting function
Separate gain controls for each channel
Signal and clipping LEDs for each channel
Power and protection LEDs
Bridgeable for high-power mono operation
1U height
Includes rack mount ears

Buy 300 watt rms amplifier from Amazon.com
  • In stereo mode it produces 150 watts per channel RMS (300 watts per channel peak) into a 4-ohm load or 100 watts per channel RMS (200 watts per channel peak) into an 8-ohm load.
  • When driving a 2-ohm load, it can produce 250 watts per channel RMS (500 watts per channel peak). When bridged for mono mode, the amplifier produces 500 watts RMS (1000 watts peak) into a 4-ohm load and 360 watts RMS (720 watts peak) into an 8-ohm load.
  • It features an extremely flat 20Hz 20kHz (0, -1dB) frequency response with less than 0.05 THDN and more than 96dB signal-to-noise ratio. Built-in protection circuitry includes full short circuit, open circuit, thermal, ultrasonic, and RF protection.
  • It also features power on/off muting function to prevent popping in the speakers when power is turned on or off.
  • There is also a selectable limiter, which serves as a brick wall on volume to prevent high volume levels from driving the amplifier into clipping, which can cause speaker damage.




Buy 300 watt rms amplifier from Amazon.com


Kicker 43CXA3001 600 Watt MONO Class D Power Car Audio Amplifier Amp CXA300.1

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Mono Subwoofer Amplifier 150 Watts RMS x 1 at 4 ohms 300 Watts RMS x 1 at 2 ohms KickEQ BOOST CEA-2006 compliant Class D amp technology Variable Low-Pass Filter (50-200 Hz, 12 dB/octave) Fixed Subsonic Filter (25 Hz, 24 dB/octave) Variable Bass Boost (0-12 dB at 40 Hz) Frequency Response: 20-200 Hz Preamp Inputs and Outputs Speaker-Level Inputs (speaker wire to RCA adapters required) Balanced Differential Inputs Reduce Noise and Interference Includes Hardware for Vertical Mounting

Buy 300 watt rms amplifier from Amazon.com
  • 150 Watts RMS X 1 At 4 Ohms / 300 Watts RMS X 1 At 2 Ohms
  • KickEQ BOOST
  • Class D Amp Technology
  • Balanced Differential Inputs Reduce Noise And Interference





Buy 300 watt rms amplifier from Amazon.com


Rockford Fosgate P300X1 Punch 300 Watt Full-Range Mono Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.

Buy 300 watt rms amplifier from Amazon.com
  • 200 Watts x 1 @ 4-Ohm / 300 Watts x 1 @ 2-Ohm
  • Works with factory installed & aftermarket source units
  • Onboard 12dB/octave LP/HP/AP crossover
  • On-board Punch EQ with 18dB boost at 45Hz
  • Cast Aluminum Heatsink with Stealth top mounted control panel



Buy 300 watt rms amplifier from Amazon.com


Kicker 43CXA3001 Sub Amplifier CXA300.1 Mono Amp 300W (Renewed)

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Features:

  • Kicker CX Series CXA300.1
  • Class-D 2-Ohm Stable Monoblock Amplifier
  • RMS Power Rating:
    • 4 ohms: 150 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
  • Total power output: 600 watts
  • Pulse Width Modulated MOSFET power supply
  • Kicker CXARC wired remote bass level control available and sold separately
  • LED power (green) and protect (red) indicators
  • Soft start turn-on
  • Mono channel operation
  • Speaker-level (high-level) inputs via RCA
    • Requires Kicker KISL, available and sold separately
  • Preamp RCA outputs to daisy chain multiple amps
  • 3-way protection circuitry (thermal, overload, and speaker short protection)
  • Dual speaker terminals simplify the hookup of multiple speakers
  • Input sensitivity:
    • Low level: 125mV-5V
    • High level: 250mV-10V
  • Frequency Response: 25 - 200Hz
  • Signal to Noise Ration: >95dB
  • Variable Low-Pass Crossover: 50 - 200Hz 12dB/octave
  • Variable Bass Boost: 0 to 12 dB bass boost at 40 Hz
  • Fixed Subsonic Filter @ 25hz, 24db/octave
  • Dimensions: 7-3/16"W x 8-1/8"L x 2-3/8"H

Buy 300 watt rms amplifier from Amazon.com
  • This Certified Refurbished product is tested and certified to look and work like new. The refurbishing process includes functionality testing, basic cleaning, inspection, and repackaging. The product ships with all relevant accessories, a minimum 90-day warranty, and may arrive in a generic box. Only select sellers who maintain a high performance bar may offer Certified Refurbished products on Amazon.com
  • Kicker 43CXA3001 Sub Amplifier CXA300.1 Mono Amp 300W



Buy 300 watt rms amplifier from Amazon.com


Rockville RXD-M1 2000 Watt/1000w RMS Mono Class D 1 Ohm Amplifier Car Audio Amp

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Rockville  RXD-M1 2000 Watt/1000 Watt RMS Mono Class D 1 Ohm Car Stereo Phenom Amplifier With Distortion Free Music Playback

Buy 300 watt rms amplifier from Amazon.com
  • Rockville RXD-M1 2000 Watt/1000 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier With Optical Coupler Technology.
  • CEA Compliant Power Ratings: 1 Ohm: 500 Watts x 1 Channel <1 THDN. 2 Ohm 350 Watts x 1 Channel <1 THDN. 4 Ohm: 250 Watts x 1 Channel <1 THDN).
  • RMS Power Ratings: 1 Ohm: 1000 Watts x 1 Channel. 2 Ohm 700 Watts x 1 Channel. 4 Ohm: 500 Watts x 1 Channel.
  • Peak: 1 Ohm: 2000 Watts x 1 Channel. 2 Ohm 1400 Watts x 1 Channel. 4 Ohm: 1000 Watts x 1 Channel.
  • High-Speed MOSFET Power Supply. Optical Coupler Class "D" Technology. Studio-Grade Bipolar Output Stage Transistors.
  • Now exclusively with "Professional Peak Limiter Circuitry" which guarantees distortion free musical playback at all levels.
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control Switch.
  • Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System.
  • RCA Preamp Line Output. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: 100dB.
  • Frequency Response: 10Hz - 500KHz. Damping Factor: > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions: (W x H x L) 8.5" x 1.8" x 12.5".




Buy 300 watt rms amplifier from Amazon.com


Kicker 43CXA6001 Mono Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Mono Subwoofer Amplifier 300 Watts RMS x 1 at 4 ohms 600 Watts RMS x 1 at 2 ohms KickEQ BOOST CEA-2006 compliant Class D amp technology Variable Low-Pass Filter (50-200 Hz, 12 dB/octave) Fixed Subsonic Filter (25 Hz, 24 dB/octave) Variable Bass Boost (0-12 dB at 40 Hz) Frequency Response: 20-200 Hz Preamp Inputs and Outputs Speaker-Level Inputs (speaker wire to RCA adapters required) Balanced Differential Inputs Reduce Noise and Interference Includes Hardware for Vertical Mounting

Buy 300 watt rms amplifier from Amazon.com
  • 300 Watts RMS X 1 At 4 Ohms / 600 Watts RMS X 1 At 2 Ohms
  • KickEQ BOOST
  • Class D Amp Technology
  • Balanced Differential Inputs Reduce Noise And Interference




Buy 300 watt rms amplifier from Amazon.com


Planet Audio AC600.2 Anarchy 600 Watt, 2 Channel, 2/4 Ohm Stable Class A/B, Full Range, Bridgeable, MOSFET Car Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:


Drive to your own beat with the Planet Audio Anarchy AC600.2 2-Channel Class A/B Full Range Amplifier. This powerful 2-Ohm stable Amplifier features 600 Watts Max Power with a MOSFET power supply to get your audio system rocking. Customize the sound with the Variable Low and Fixed High Pass Crossover and Bass Boost. Bridge Channels for even more power and flexibility. The Anarchy Series of Amplifiers are built to break the rules, allowing you to customize and control your sound so you can live like a mobile anarchist, clear and loud. Get out of this world sound with the Planet Audio AC600.2.

For more product details, please scroll down.

Buy 300 watt rms amplifier from Amazon.com
  • 300 W MAX Power @ 2 Ohm x 2 Channels
  • 150 W MAX Power @ 4 Ohm x 2 Channels
  • 600 W MAX Bridged Power @ 4 Ohm x 1 Channels
  • Full-Range, Class A / B Topology, MOSFET Power Supply
  • Low and High Level Inputs, Variable Filter, Variable Bass Boost
  • Dimensions: Depth 7.5" x Width 10" x Height 2.4"
  • Bass Boost Variable 0 to 18 dB






Buy 300 watt rms amplifier from Amazon.com


JBL Sub 550P High-Performance 10" Powered Subwoofer Sealed Enclosure with Built-in 300-Watt RMS Amplifier

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

JBL Studio 550PBK
10-INCH (250mm) subwoofer with built-in 300W RMS amplifier
Looking for an overwhelmingly accurate and deep bass. Try JBL Studio 550 subwoofer with built in 300W RMS amplifier. Innovative materials and cutting- edge technology have always put JBL products out in front of the competition's. So expect extreme output from us and be prepared for a high impact performance that may surprise you. The JBL Studio line of loudspeakers, which incorporates the very best in modern design and proven technology, is becoming one of the industry's most recognized and admired.

JBL Studio 550P at a glance:
10-INCH (250mm) low-frequency transducer
Built-in 300W RMS amplifier
Sealed enclosure
Forward-firing transducer provides maximum bass impact
LFE and line level inputs allow proper operation with a variety of receivers and processors
Adjustable crossover frequency optimizes subwoofer performance
Phase control increases installation flexibility
Metal floor spikes improve bass impact and reduce unwanted boominess in the sound
Auto turn-on and turn-off for more convenient use and to conserve energy

Key Features
10" (250mm) low-frequency transducer
10" (250mm) low-frequency transducer on the JBL Studio 550P delivers deep bass impact and excitement to make you feel like part of the action. The PolyPlas cone material increases cone stiffness and damping for tighter, more extended bass without breakup or distortion. The cast-aluminum frame maintains precise alignment for consistent performance in all conditions and at all volume levels while dissipating heat for increased power and handling.

Built-in 300W RMS amplifier
High-power amplification for louder volume with less distortion results in a more realistic bass while generating less heat than lower-powered amplifiers when operating at higher outputs.

Glass-filled ABS Bi-Radial High-Frequency Horn
The glass-filled ABS Bi-Radial High-Frequency Horn is controlled directivity at ear level of seated listeners minimizes unwanted HF interaction with walls and furniture, which creates cleaner, more realistic HF sound over a wider listening area.

Exclusive Design
Clean and Dynamic, one-of-a-kind look makes a dramatic design statement in any room. JBL Studio 520C is available in black finish.

Buy 300 watt rms amplifier from Amazon.com
  • 10-Inch cellulose-fiber cone is both strong and light
  • Powerful 300-watt amplifier
  • A JBL computer-optimized bass-reflex port provides deeper bass and less turbulence
  • Use of premium components gives you less distortion
  • Adjustable crossover frequency optimizes subwoofer performance
  • Use of premium components gives you less distortion
  • These speakers are designed to look good anywhere with a style that equals their substance
  • The JBL ES Series uses cellulose-fiber cones reinforced with a ploymer coating for uniform pistonic motion
  • Matches other speakers in the JBL ES line

Buy 300 watt rms amplifier from Amazon.com


Alpine MRV-M500 500 Watt RMS Class "D" Mono Car Amplifier Amp Kit

Buy 300 watt rms amplifier
Check Price on Amazon
Buy 300 watt rms amplifier from Amazon.com

Description:

Features:

Alpine MRV-M500 500 Watt Mono Block Class D Car Amplifier
Fourth Generation V-Power Series
500 Watt x 1 Channel At 2 Ohm
300 Watt x 1 Channel At 4-Ohm
Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct.
EQ (Equalizer): 0 to 12dB, fc=50Hz
Power Requirements: 14.4 V.DC (11-16V allowable)
Input Sensitivity (RCA Input): 0.15 - 4.0 V
Input Sensitivity (Speaker Level Input): 0.4 - 10 V
Input Impedance: >10k ohms
Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz
Damping Factor (10W into 4 Ohms at 100Hz): >500
Signal to Noise (1W into 4 Ohms): >85 dB
Signal to Noise (Rated Power into 4 Ohms): >105 dB
Remote Level: -20 to 0 dB
Terminal Layout: Two-Sided
Screw Mount / Wire Cover: Mounting Screw Terminals
Amplifier Type: Class-D (Digital)
Channel Design: 1 Channel (Mono)
Power Supply Design: DC-DC PWM Power Supply
Power Supply: MOSFET
Pre-Amp Stage: Discrete
Final Outputs: Power MOSFET
Crossover: Variable Lowpass Filter
Gain Control: Continuously Adjustable Gain Control
Bass EQ: Bass EQ Function
Bass Control: Remote Bass Control (RUX-KNOB) Ready
Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
Low-impedance Possibility:Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Board Circuitry: S.T.A.R. Circuit
Speaker-Level Inputs: 4-channel Speaker Level Inputs
Power Indicator: LED Power Indicator
Thermal Control: Multi-stage Power Limits
Bridgeable Amplifier
Includes Birthsheet For Power Verification
40 Smaller Chassis Design With Same Power
Class D Digital Amplifier
Snap-On Terminal Covers For Clean Install
Dual Internal Error Correction Tech
Compatible With RUX-KNOB for Bass Adjustment
Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit

Buy 300 watt rms amplifier from Amazon.com
  • 500 Watt Mono Block Class D Car Amplifier. Fourth Generation V-Power Series. 500 Watt x 1 Channel At 2 Ohm. 300 Watt x 1 Channel At 4-Ohm. Crossover Frequency (LPF): 50 - 400 Hz, -24dB/oct. EQ (Equalizer): 0 to 12dB, fc=50Hz. Power Requirements: 14.4 V.DC (11-16V allowable). Input Sensitivity (RCA Input): 0.15 - 4.0 V. Input Sensitivity (Speaker Level Input): 0.4 - 10 V
  • Input Impedance: >10k ohms. Frequency Response (0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz. Damping Factor (10W into 4 Ohms at 100Hz): >500. Signal to Noise (1W into 4 Ohms): >85 dB. Signal to Noise (Rated Power into 4 Ohms): >105 dB. Remote Level: -20 to 0 dB. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Mounting Screw Terminals. Amplifier Type: Class-D (Digital)
  • Channel Design: 1 Channel (Mono). Power Supply Design: DC-DC PWM Power Supply. Power Supply: MOSFET. Pre-Amp Stage: Discrete. Final Outputs: Power MOSFET. Crossover: Variable Lowpass Filter. Gain Control: Continuously Adjustable Gain Control. Bass EQ: Bass EQ Function. Bass Control: Remote Bass Control (RUX-KNOB) Ready. Remote Turn On: Remote Sensing Function (for RCA Input & Speaker Input)
  • 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100 Copper RCA Cable. 17 8 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3 8 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 60 Amp AGU Gold Plated Fuse. 7 Split Tube Loom
  • Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows for 100 improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F


Buy 300 watt rms amplifier from Amazon.com


300 watt rms amplifier