Skar Audio RP-2000.1D Monoblock 2000-Watt Class D MOSFET Subwoofer Amplifier
Skar Audio engineered the RP-2000.1D Class D monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its' class. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-2000.1D.
The RP-2000.1D is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout. Conservatively rated at 2,000 watts RMS power at a 1-ohm load, with the capabilities of reaching beyond 2,800 watts at max power output. This amplifier is by far one of the most popular and affordable mono-blocks we have ever released, and is great for powering a pair of 1,000 watt rms subwoofers or one larger and more powerful 2,000 watt rms subwoofer.
Furthermore, the oversized 1/0-gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation. You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ switch (0, 6, 12dB), and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
In addition to all the above features, this model also features 4-way protection circuitry, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, overheating, low voltage, and more. This amplifier comes with a remote subwoofer level control (bass knob) allowing the user to have full control over their bass from the front of the vehicle.
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 2,800 Watts, RMS Power at 1 Ohm: 2,000 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with 6 or 12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 1/0 AWG Power & Ground Input Terminals for Maximum Current Flow
- Stable at 1 ohm, Remote Subwoofer Level Control Included
NVX 12-inch True 1000 watt RMS 2000 watts Peak Professional Grade Dual 2-Ohm Car Subwoofer 3-Dimensional Die Cast Aluminum Basket VCW122
THE BASS YOU'VE BEEN LOOKING FOR: NVX VCW122 It's not for everyone, but if you're a true bass junkie, then there's simply no substitute for the bone-rattling, gut-wrenching sensation of a big beefy woofer. But when NVX designs an SPL monster, we do more than just slap on a big magnet and a "10,000 watt MAX" sticker - we engineer a true competition grade subwoofer that will both satisfy and withstand the abuse of the most demanding Bass Heads. The VC series woofers are the embodiment of countless hours of research, development and product testing. Pressed Paper Cone with Fiber Glass Weave Heavy Duty Die Cast Aluminum Basket Custom High Roll Foam Surround with Nylon Stitching 195 oz. Triple stacked High Energy Magnet Structure 3.0" High Temperature Aluminum Voice Coil Sensitivity: 85dB Frequency response: 20-200 Hz Resonance Frequency (Fs): 24 Hz Total Speaker Q Value (Qts): 0.454 Electrical Q Value (Qes): 0.486 Top-mount depth: 7"" 1-year Warranty
- Power Handling: 1000 Watts RMS - 2000 Watts Peak
- 3.0" High Temperature Aluminum Voice Coil
- Custom High Roll Foam Surround With Nylon Stitching delivers improved linearity and MORE output
- Woven Fiber Pressed Paper Cone helps reproduce tight and accurate bass with minimal cone distortion
- Dual Nomex Poly-Cotton Spiders are designed to be durable and long-lasting
Atrend 12LSV Single 12" Vented Carpeted Subwoofer Enclosure
Atrend 12LSV 12-Inch Single Vented Subwoofer Enclosure
(W) 30.00" x (H) 14.75" x (D) 14.75" - Vent (W) 2.75" x (H) 13.25" x (Deep) 16.50"
Gross Cu. Ft. 2.90 Net Cu. Ft.2.40 (Tuning 43Hz) Speaker hole cutout 11.12"
Speaker face is .75" Body is .75"
Slot Vent with Spring loaded extra large terminal cups
Wire will be needed to run from the speaker to the terminal cup tabs
IMPORTANT:Confirm the required speaker hole cutout is no more than 11.12".
- Cutout Diameter - 11.125"
- Max Mounting Depth - 10"
- Net Volume - 2.51"
- (Height) 14.875" x (Width) 30.125" x (Depth) 15"
- Premium Charcoal Carpet
- 12-inch Single Vented SPL Enclosure
- Shared Chambers
- MDF Construction
- Completely Carpeted Enclosure
- 0.75-inch Speaker Baffles
NVX MVPA1 MONOBLOCK CLASS D MINI AMP
NVX MVP Micro V Amplifiers The Micro-V MVP series amplifiers are our smallest amplifiers yet! If we're talking size that is! These amps are almost the size of a deck of cards, measuring in at just 4"W x 5-7/16"L x 1-9/16"H but still pumping out some serious juice! Our new MVP series amps use a cutting edge micro Class-D circuitry to keep the footprint small but the efficiency and output high. These amps are perfect for tight fit installations like in Smart Cars or motorcycles but are perfect for anyone who wants a bangin' system without taking up too much space. RMS Power Rating: 4 ohms: 200 watts x 1 chan. 2 ohms: 300 watts x 1 chan. Variable low-pass filter (40-400 Hz) Input Sensitivity: 200mV-5V 8 gauge power and ground wiring is required for installation.
- 2 OHM
- MONO BLOCK AMP
- CONSERVATIVELY RATED AT 300 WATTS X1
- COMPACT SIZE
- CEA Compliant
- No yellow shampoo
- Las vegas hotels best pool
- Headphones for the office
- Sephora foundation for oily skin
- Cheap diving watch
- Poulan chainsaw 14 inch
- Way to heat up baby bottle