Drilling into steel

410 Stainless Steel Self-Drilling Screw, Plain Finish, Wafer Head, Phillips Drive, #3 Drill Point, #10-24 Thread Size, 1-1/4" Length (Pack of 25)

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

The 410 stainless steel self-drilling screw with plain finish has a wafer head and a Phillips drive. The 410 stainless steel material offers high strength and hardness ratings, and resists corrosion in mild environments. The material is magnetic. The wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface that helps create a flush fit. The Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

Buy drilling into steel from Amazon.com
  • 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments
  • Plain surface has no finish or coating
  • Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface
  • Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening
Buy drilling into steel from Amazon.com


Hilitchi 410 Stainless Steel Wafer Head Phillips Self Drilling Screws Sheet Metal Tek Screws Assortment Kit, Modified Truss Head Self Driller - Size: #8 x 1/2" #8 x 1-1/2" (Pack of 240)

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

Hex Wafer HeadSelf Drilling Screws: https://www.amazon.com/dp/B01J3M1KX6
Flat HeadSelf Drilling Screws: https://www.amazon.com/dp/B07352HHB8
Wafer HeadPhillips Self Drilling Screws: https://www.amazon.com/dp/B073531BV6
Pan HeadPhillips Self Drilling Screws: https://www.amazon.com/dp/B0734YL7HT

Hilitchi 240 Pcs High Quality 410 Stainless Steel Self Drilling Screws Assortment Kit

Specifications:
Screw Type: Wafer Head, Phillips Drive
Material: 410 Stainless Steel
Color: Silver tone
Package Quantity: 240-Piece
The Package Contains 6 Sizes
Size Included: #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #8 x 1-1/2''

Features:
410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments
It is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material.
Teks self-tapping screws provide secure fastening with strong holding power without the need to pre-drill.

Package Included:
- #8 x 1/2'' - 50pcs
- #8 x 5/8'' - 50pcs
- #8 x 3/4'' - 40pcs
- #8 x 1'' - 40pcs
- #8 x 1-1/4'' - 30pcs
- #8 x 1-1/2'' - 30pcs
Package Quantity: 240pcs
This set is organized by size in a transparent storage case for quick access and protection.

Buy drilling into steel from Amazon.com
  • High-quality 410 Stainless Steel Self Drilling Screws Assortment Kit
  • Material: 410 Stainless Steel; Screw Type: Wafer Head, Phillips Drive
  • Packing Quantity: 240pcs, Packed in A Rugged Convenient Re-sealable Plastic Storage Case.
  • The Package Contains 6 Sizes, Included: #8 x 1/2'', #8 x 5/8'', #8 x 3/4'', #8 x 1'', #8 x 1-1/4'', #8 x 1-1/2'';
  • Self-Drilling screws. It is wood drill tail screw, mainly used in steel structure caigang watt fixed can also be used for fixing the simple construction of the sheet material.






Buy drilling into steel from Amazon.com


Self Tapping #8 x 3/4" Stainless Steel Metal Screws, (100 Pack) Phillips Pan Head Self Drilling Screws, 410 Stainless Steel, by Bolt Dropper.

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

Bolt Dropper hardware perfect for use near salt water, fresh water, with sheet metal and other related projects. 

TOP QUALITY:

  • Rated for both indoor and outdoor use.
  • Superior corrosion resistance to regular plating, made with¬†100 Stainless Steel.

 

VALUE:
Get the most out of your purchase! We offer different size packages so you won't have to worry about running out of hardware in the middle of your project. Bolt Dropper Hardware is the best on the market and we back our claim 100. Buy With Confidence

 

SPECIFICATIONS:

  • Material: 410¬†Stainless Steel

 


WARRANTY:

Bolt Dropper hardware come with a 100 Satisfaction Guarantee, if you have any problems we will replace them free of charge!

Buy drilling into steel from Amazon.com
  • HIGH QUALITY STAINLESS: These Pan Head Sheet Metal Screws are 100 410 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today.

  • SELF TAPPING: Our hardware is very strong and is great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications.
  • GREAT TO KEEP AROUND: Bolt Dropper hardware is great to have around for use with sheet metal and¬†wet environments. Bolt Dropper hardware is¬†the highest quality available on the market and we stand by our claim 100. They are strong, corrosion resistant and will support all of your projects.

  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.





Buy drilling into steel from Amazon.com


#12 X 1-1/2'' Stainless Hex Washer Head Self Drilling Screws, (100 pc) 410 Stainless Steel Self Tapping Choose Size and QTY

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

Bolt Dropper hardware is perfect for use near salt water, fresh water and other wood related projects.

TOP QUALITY:

  • Rated for both indoor and outdoor use.
  • Superior corrosion resistance to regular steel, made with 100 410 Stainless Steel, no coatings just stainless through and through!

VALUE:

  • Get the most out of your purchase! We offer different size packages so you won't have to worry about running out of hardware in the middle of your project. Bolt Dropper hardware is the best on the market and we stand by our claim 100.
SPECIFICATIONS:
  • Size: #12 x 1-1/2"
  • Material: 410 Stainless Steel
  • Quantity: 100 Pieces
  • Head: Hex Washer
  • Point Type: Self Drilling


WARRANTY:

Bolt Dropper Hex Washer Head Self Drilling Tek Screws come with a 100 Satisfaction Guarantee, if you have any problems we will replace them free of charge!

Buy drilling into steel from Amazon.com
  • HIGH QUALITY STAINLESS: These Hex Washer Head Self Drilling Tek Screws are 100 410 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today.
  • SELF TAPPING: Our hardware is very strong and is great for both indoor and outdoor use. The stainless steel is superior to regular steel and provides excellent rust resistance in water applications.
  • HEX WASHER HEAD: Stripping a screw head is a thing of the past with our Hex Head screws. Put a socket on that impact or drill and fasten away!
  • GREAT TO KEEP AROUND: Bolt Dropper hardware is great to have around for use in wood and wet environments. Bolt Dropper Screws are the highest quality available on the market and we stand by our claim 100. They are strong, corrosion resistant and will support all of your projects.
  • LIFETIME GUARANTEE: We are so confident that our product is the best on the market that we offer a NO HASSLE LIFETIME GUARANTEE.





Buy drilling into steel from Amazon.com


Dewalt DCD771C2 20V MAX Cordless Lithium-Ion 1/2 inch Compact Drill Driver Kit

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

The DEWALT DCD771C2 20-Volt Max Lithium Ion compact drill driver has a lightweight design with a high performance motor that delivers 300 unit watts of power. The high speed transmission delivers 2 speeds 0-450 RPMs and 0-1500 RPMs. The ergonomic handle allows comfort and control. The tools weighs 3.6 pounds and contains 2 20-volt Max compact Lithium ion battery packs, a compact charger and durable contractor bag.

Buy drilling into steel from Amazon.com
  • Compact, lightweight design fits into tight areas
  • High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • High speed transmission delivers 2 speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
  • Ergonomic handle delivers comfort and control
  • *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18. Battery capacity: 1.3 Ah






Buy drilling into steel from Amazon.com


DEWALT DW1354 14-Piece Titanium Drill Bit Set

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

DeWalt's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6 to 1/2-Inch in a plastic tough case.

Buy drilling into steel from Amazon.com
  • Titanium Pilot Point for Longer Life
  • Starts on contact for cleaner holes
  • No spin shanks
  • Tapered web provides greater durability to reduce breaking




Buy drilling into steel from Amazon.com


Estwing Sure Strike Drilling/Crack Hammer - 3-Pound Sledge with Fiberglass Handle & No-Slip Cushion Grip - MRF3LB

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

The Sure Strike drilling hammer from Estwing, has a forged steel blue painted head which is hardened and tempered. Both faces are fully polished. Designed for striking cold chisels, brick chisels, punches, star drills, spikes and hardened nails. Both faces are beveled. This drilling hammer has an 11 in. jacketed and textured yellow fiberglass handle which allows for heavier blows in an environment where there is limited swing. A strong reliable tool you can count on. Protect your eyes from flying particles and dust. Always wear safety goggles. Bystanders shall also wear safety goggles.

Buy drilling into steel from Amazon.com
  • FORGED STEEL HEAD - Maximum strength and durability for a lifetime of hard work
  • BALANCE AND TEMPER - The most durable, longest lasting striking tools available
  • HEAVY HITTING HAMMER - Perfectly balanced to deliver powerful blows with an easy swing
  • FIBERGLASS HANDLE - Lightweight, durable handle offers a comfortable controlled swing with a ribbed grip to prevent slips
  • VERSATILITY ON THE JOB - Use with chisels, punches, star drills, hardened nails & more


Buy drilling into steel from Amazon.com


DEWALT DW1361 Titanium Pilot Point Drill Bit Set, 21-Piece

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. Includes sizes from 1/6-inch to 1/2-inch in a plastic tough case.

Buy drilling into steel from Amazon.com
  • Titanium pilot point for longer bit life
  • Starts on contact for cleaner holes
  • No spin shanks
  • Tapered web provides greater durability to reduce breaking
  • Includes sizes from 1/16-inch to 1/2-inch in a plastic tough case



Buy drilling into steel from Amazon.com


Power Planter 100 USA Made 3"x12" DIY Guru Auger

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

Our DIY Guru Hand Held Auger is perfect for homeowners who want to plant more in less time. Do-it-yourselfers can give their plants better root-to-soil contact and reduce plant loss easily with this hand digging machine. The auger measures 3 inches in diameter by 12 inches long. It has been designed to leave a small amount of loose soil in the bottom of the hole when digging to help a new plant to start growing. The Perfect Hand Held Auger For All Projects This auger is great for getting those little jobs around the house done - like mixing gallons of paint, mortar, grass seed or fertilizer. You can plant bulbs or 3-inch potted plants while enjoying the flexibility to do countless other jobs, too. Even useful as a paint mixing auger, there's plenty of projects this hand held auger can do. The auger bit features rugged, 10-gauge flighting, a 3/8-inch non-slip hex drive, and it is painted a glossy black enamel. It also includes a 5/8-inch center shaft made completely from steel. Our DIY auger fits most cordless or electric drills. It's easy to use too - just tighten the drill chuck to secure the auger and you're ready to dig. *Drill is not included

Buy drilling into steel from Amazon.com
  • 100 MADE IN THE USA, with USA sourced materials. Made by family farmers for over 30 years for your garden
  • Quickly and efficiently plant bedding plants and bulbs or mix paint, mortar, or soil in a bucket or wheelbarrow
  • Non-slip hex drive to fit any 3/8" or larger drill
  • *Patent Pending Design*
  • Lifetime warranty on craftsmanship and materials




Buy drilling into steel from Amazon.com


DEWALT DCF680N2 8V Max Gyroscopic Screwdriver 2 Battery Kit

Buy drilling into steel
Check Price on Amazon
Buy drilling into steel from Amazon.com

Description:

The DEWALT DCF680N2 8V MAX Gyroscopic Screwdriver 2 Battery Kit features motion activation which allows the user to control variable speed, along with forward and reversing action by simply twisting the tool left or right. Motion activated variable speed ranges from 0-430 rpm; intuitive motion activated control allows for precise fastening into wood, plastic and light-gauge metal. Adjustable two-position handle allows the user to choose either the straight in-line position or pistol-grip configuration and the 15 clutch position settings allow control when completing light fastening applications. This work light also features 2 LED headlights which enables illumination in confined areas without shadowing. Battery indicator on the tool allows end users to know when to charge packs - one pack covers 5 days of runtime with the typical user. 8V MAX battery pack allows for longer run-time and charges in one hour. One-handed loading 1/4" hex-shank chuck allows for quick screwdriver bit change and holds 1" bit tips. This is an Ideal tool for any professional end user looking for a compact, portable screwdriver with precise speed control. Applications include: #8x1 5/8" Drywall Screw into 2" x 4" SPF, #8 & #6 Machine screw insertion and removal, #6 & #8 Cabinet hardware screws, electrical switch and outlet wall plate screws. Kit includes (1) 1 hour charger, (2) 8V MAX compact batteries and Kit Bag,.

Buy drilling into steel from Amazon.com
  • Motion-activated Variable Speed & Reversing Control For Precise Fastening Control
  • 0rpm-430rpm For Fastening Into Wood, Plastic & Light-gauge Metal
  • Adjustable 2-position Handle Allows For Operation In Either In-line Or Pistol-grip
  • inch hex allows for quick screwdriver bit change and holds 1 inch bit tips
  • Motion Activation Variable Speed and Reversing Control
  • Motion Activated Variable Speed 0 - 430 RPM
  • Adjustable two-position handle; straight or pistol grip
  • 15 Clutch Position Settings
  • 8V MAX Battery Pack











Buy drilling into steel from Amazon.com


Drilling into steel