Bits for drilling steel

Champion Cutting Tool Brute Platinum XL5-3/16 Heavy Duty Jobber Drill Bits (12 per pack): Made In USA

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

Champion Cutting Tool Corp, Brute Platinum Jobber drill bits are developed to outperform standard cutting tools. The combination of quality raw materials, geometries and surface treatments provide consistent quality for predictable high performance. Field tests have proven Brute Platinum XL5 drills penetrate faster than cobalt, providing lower fatigue levels to the operator, since less force is required to drill. Manufactured from a premium grade of molybdenum high speed steel, which is further enhanced by a wear resistant NOMO (Nitrite on Margin Only) treatment, Brute Platinum drills hold a sharp cutting edge for faster, longer drilling.

Buy bits for drilling steel from Amazon.com
  • Drill 3x Longer than competitors drills! Drill 2x Faster than cobalt! Drill Accurate due to 135* split point and tapered web geometry!
  • Better than cobalt! XL5 is able to flex when cobalt drills chip or snap
  • Premium high speed steel and NOMO surface treatment for longer tool life, fast penetration, and flexibility
  • Self centering 135 degree split point prevents drill from walking
  • Ultimate workhorse for drilling steel, stainless steel, titanium alloys and other hard to drill materials


Buy bits for drilling steel from Amazon.com


Neiko 11402A Stubby Drill Bit Set for Metal, 5 Piece 1/4-Inch Quick Change Hex Shank M2 HSS Steel

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

The Neiko Quick Change Stubby Drill Bit Set includes a plastic hex-shank holder and the following bit sizes: 3/32, 1/8, 3/16, 1/4 and 5/16-inch bits.

Buy bits for drilling steel from Amazon.com
  • Short bits are constructed of premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear
  • 135 degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces
  • 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs
  • Each stubby bit measures from 1.9 inches to 2.32 inches for working in hard-to-reach tight spaces with short and right angle drills
  • The 5pc drill bit set includes a hex shank holder and the following bit sizes: 3/32, 1/8, 3/16, 1/4 and 5/16-inch drill bits





Buy bits for drilling steel from Amazon.com


Bosch MS4041 41-Piece Drill and Drive Bit Set

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

This Bosch bit set - with double-ended ratcheting right-angle screwdriver - provides all-in-one convenience to users who need tough and high-quality Bosch accessories for applications in wood, metal and masonry. This 41-piece set provides bits for drilling and driving as well as sockets, in an easy-to-use and easy-to-access case. The removable sections provide transportability. Includes: (11) 1" insert screw bits: PH : 1, 2, PZ: 1, 2, SL:4,5,6 T: 20 H: 4, 5, 6, (1) Bit holder, (1) Double ended screwdriver, (6) Sockets:3/16", 7/32", 5/16", 11/32", 3/8", 7/16", (1) Socket Adapter, (1) Countersink, (18) Drill Bits:, Black Oxide: (2) 1/16", (2) 1/8", (1) 5/32", (2) 3/16", Rotary Masonry Bits: (2) 5/32", (2) 3/16", 1/4", 5/16", Brad Point Bits: 1/8", (2) 3/16", 1/4", 5/16", (2) Spade Bits: 5/8", 3/4".

Buy bits for drilling steel from Amazon.com
  • VERSATILE: This set includes a wide variety of both driver bits and drill bits as well as a selection of accessories to help assist in a number of drilling and fastening applications
  • QUALITY: The included driver bits feature designs to lessen damage to the screw head and provide better bit-gripping power. The split drill bit tips provide easy drilling starts and are ideal for a variety of applications such as wood, metal, masonry and more
  • CONVENIENCE: With such a wide variety of bits and accessory options, this set is deal for everyday tasks from the garage to the workshop to the home
  • PORTABLE: Includes a tough jobsite case for secure storage, easy access, organizing and portability. The set includes removable components so you can take the range of bits wherever you need them for carry-along convenience
  • ALL IN ONE: Includes 1 in. Insert Screw Bits, Bit Holder, Double-Ended Screwdriver; Sockets, Socket Adapter; Countersink; Black Oxide Drill Bits, Rotary Masonry Drill Bits, Brad Point Bits, Spade Bits




Buy bits for drilling steel from Amazon.com


Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 50pcs in 5 Sizes(1, 1.5, 2, 2.5, 3mm) to Cut Through Stainless Steel Cast Iron and Hard Metals

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90 and 118. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

Not Suggested for Hardened Steel, High Carbon Steel and Steels Blended with Impurities

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

About Breakage

Please be careful when you drill holes with shese needle-like small bits. They're more likely to break than larger ones.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.

Buy bits for drilling steel from Amazon.com
  • M35 Cobalt Steel - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
  • No Center Punch Needed - the 135 quick-cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander"
  • For Stainless Steel - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate.
  • 50pcs Set - The set includes 50pcs of metric M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 10pcs of each size. These bits are quite small. Please refer to a second product picture.
  • Satisfaction Guaranteed - Here at Migiwata we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.






Buy bits for drilling steel from Amazon.com


5 Pcs Pack 7/16" Inch M35 HSS Cobalt Drill Bit Jobber Length Drill Bits Twist Drill Bits 135 Deg. Split Point Drilling Steel, Meteal, Iron.

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

7/16" Inch-HSS Cobalt Drill Bit,Jobber Length, 135 Degree Split Point To Minimize Walk, 5 Cobalt For Higher Heat & Abrasion Resistance, Heavy Duty Web Construction For Strength & Durability, For Tough Metal Drilling, Including Heavy Duty Abrasive, Alloy Metal Drilling On Hardened Steel, Cast Iron & Stainless Steel, Packed in plastic bag with lable

Buy bits for drilling steel from Amazon.com
  • 7/16 Inch HSS Cobalt Co5 Fully Ground Jobber Length Twist Drills General Purpose
  • M35 Cobalt High Speed Steel For Drilling Steel, Stainless Steel, Hard Metal and Iron..
  • Ideal for drilling in tough metal, including heavy-duty abrasive alloy metal drilling on hardened steel
  • 135-degree split-point tip starts drilling immediately with less force and eliminates "walking" across the work surface
  • Packed in a Plastic Bag with lables on bag






Buy bits for drilling steel from Amazon.com


Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90 and 118. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

Tests shows that the M35 cobalt steel drill bits can penetrate a 5mm-thick 304 stainless steel plate in 5 seconds.

Not Suitable for Hardened Steel

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers, although some others said they worked well with hardened steel.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.

Buy bits for drilling steel from Amazon.com
  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant; for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
  • NO CENTER PUNCH NEEDED - The 135 Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
  • 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.
  • SATISFACTION GUARANTEED - Here at Migiwata, we do care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.






Buy bits for drilling steel from Amazon.com


Neiko 10193A Titanium Step Drill Bit Set, High Speed Steel 3-Piece Set Total 28 Sizes

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

This compact set replaces 28 individual drill bits. 3pc Step Drill Bits. 1/8"- 1/2", 3/16"- 1/2", 1/4"- 3/4". Two-flute design for faster, smoother cutting. Package comes with one 3/16-inch to 1/2-inch six-step bit, titanium coated. One 1/4-inch to 3/4-inch nine-step bit, titanium coated.

Buy bits for drilling steel from Amazon.com
  • TITANIUM HIGH SPEED STEEL: classic high speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal
  • 135 SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking
  • TWO-FLUTE DESIGN: clears chips faster and allows particles to escape easily
  • TRI-FLATTED SHANK: fits into power tools chuck securely and eliminates slip
  • SET INCLUDES: Bit #1 (6 steps): 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"; Bit #2 (13 steps): 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32", 7/16", 15/32", 1/2"; Bit #3 (9 steps): 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"





Buy bits for drilling steel from Amazon.com


Chicago Latrobe 150ASP Series High-Speed Steel Jobber Length Drill Bit Set with Metal Case, Heavy Duty, Black Oxide Finish, 135 Degree Split Point, Inch, 15-piece, 1/16" - 1/2" in 1/32" increments

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

Chicago Latrobe 150ASP Series Drill Set with Metal Case - Sizes in Set: 1/16" - 1/2" x 32nds; Number of Tools: 15; Material Type: HSS; Point Angle: 118 Degrees; Finish/Coating: Black Oxide

Buy bits for drilling steel from Amazon.com
  • Set of 15 jobber length drill bits includes inch sizes 1/16" through 1/2" in 1/32" increments
  • High-speed steel (HSS) provides hardness for wear resistance
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
  • Extra thick web for increased strength and rigidity compared to standard drill bits
  • Made in the USA





Buy bits for drilling steel from Amazon.com


Screwdriver bit Set, 60-Pcs Torsion Bits Set For High Torque Drilling, Forged S2 Alloy Steel, 52 Dill Bits, 6 Nut Driver Bits, 1 Magnet Bit Holders and 1 Torsion-Bit, Cool Solid Case Included, PSDB1B

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

About Tacklife-- we aim to manufacture the best products that inspire our consumers to live a more convenient, secure lifestyle.
We have our professional products monitoring team to focus on every single detail that matters to you and develop well-made, portable, exquisite products.

Specification:
Forged S2 Alloy Steel material and high precision machining, provide great durability, power,
dependability required by tough jobs.
With Torsion technology, bits have 10 times longer life than normal bits, specially designed
for high impact jobsite duties.
The connecting rod is magnetic and has two - stage design for cushioning and durability.


60 Multi-Size Screw Bits:
60-Piece bits set including 25mm insert bits, 50mm bits, 150mm bits, bit holders, nut driver bits,
complete with a wide assortment of shapes and sizes for professionals,handyman

Included batch header size:
48x25mm Torsion bits:
PH#0, #1#1 #2#2#2#3#3
PZ#0, #1#1,#2#2, #3#3
SQ#0, #1#1,#2 , #2#2#3#3
H : 3/32, 1/8, 5/32, 3/16, 7/32, 1/4"
HEX#2.5, 3, 4, 5, 5.5, 6 )
SL (5-6, 6-8,,8-10,10-12)
T H(15, 20, 20, 25, 25, 25, 27, 30, 40)

Package Included:
60-Piece bits set,1/4" Magnetic Extension Bit Holder, User Manual, 24 Month Warranty Card

Buy bits for drilling steel from Amazon.com
  • THE MATERIAL - High Forged S2 Alloy Steel for great durability and solidity, hardness up to HRC62; Precisely machined bits fit screws perfectly; Designed for tough duties of all Power Drill, Impact Drill, etc
  • TOUGH - Featuring an Xtended Torsion Zone, these impact tough bits are an impact-rated line of screwdriving bits, nutsetters, sockets and bit holders that have been enhanced to handle a new generation of higher torque impact drivers.
  • THE STRONG MAGNETICS - Extended shaft contains Neodymium magnet, 2 times more magnetic than normal material in most others, hold bits tightly, less wobble.
  • MULTl-SIZE MODEL - 60-Piece bits set including 25mm insert bits, 50mm bits, 150mm bits, bit holders, nut driver bits, complete with a wide assortment of shapes and sizes for professionals,handyman.
  • FANCY CASE - Cool solid box puts your bits in order, hold them tightly, no drop, you can conveniently switch from bits to bits and bring it from job to job.






Buy bits for drilling steel from Amazon.com


Impact Drill Bit Set for Hardened Metal 7 pcs German High Speed Steel Bits for Professional Duty with Metal Case

Buy bits for drilling steel
Check Price on Amazon
Buy bits for drilling steel from Amazon.com

Description:

Proffi's High speed steel drill bit set is made exclusively in Europe from best quality M2 steel, which is produced in Germany, France and Austria. Our drill bits are made from solid metal, while most of the manufacturers reduce costs by using the best quality metal only for tip of the drill bit. Furthermore each of the drill bit set quality is manually inspected to ensure maximum quality and reliability:

Perfect for metals, alloyed, constructional steels, cast iron, plastic and other materials.

Specially designed split-point for easy drilling start and great performance.

Made of M2 High Speed steel produced exclusively from three vendors: Erasteel (France); Beulmann (Germany); Boehler International (Austria).

Perfect hardness score (HRC - Rockwell scale): 62,5 - 63,5. Lower score results in lower durability; higher score results in fragility of a drill bit.

Production line is set up to meet DIN, JIS, ANSI, GOST and ISO EN 9001 standards. The drill bit set consists of seven drill bits, which are carefully selected to meet all the housework and construction needs.

Proffi's drill bits are used by top companies in aeronautics, German car manufacturers, premium class tyres manufacturer, luxury Swiss watches company and etc,

Buy bits for drilling steel from Amazon.com
  • ENHANCED DURABILITY. Up to 25 times more durable than regular HSS drill bit. Proffi's set is the best choice for professional/ industrial use and advanced specialists.
  • PERFECT PERFORMANCE. Drill bits scored 63,5 in Rockwell scale, what ensures maximum durability with lowest fragility in the class of professional drill bits. Each drill bit has 135 degree split-point which ensures precise drilling start and perfect accuracy.
  • UNIVERSAL. Perfect for drilling hardened steel, cast iron, carbon, alloys, cast iron, plastic and other materials. Drill bits sizes are carefully selected to meet the needs of the most demanding professionals in all cases.
  • MADE IN EUROPE. Made of M2 HSS (with at least 5 Tungsten) produced exclusively from three vendors: Erasteel (France); Beulmann (Germany); Boehler International (Austria). Each drill bit is manually inspected by quality experts to ensure superior quality.
Buy bits for drilling steel from Amazon.com


Bits for drilling steel