HolePro T-200 1-5/8" to 8" TWIN BLADE Adjustable Hole Saw Cutter for Recessed Lights Speakers. HSS Blades use Drill Power of a Hole Saw to Cut Sheetrock Plastic Soft-woods NO PLYWOOD/PLASTER
Replaceable HSS blades
DRILL NOT INCLUDED, NOT FOR PLASTER, OR ENGINEERED WOODS SUCH AS PLYWOOD OR OSB OR MDF
Great for DIYer cutting holes in soft sheetrock for recessed light cans and speakers.
Adjustable hole cutter with tough ball bearing mounted ABS shield with silicon gasket dust seal
High speed steel blades cut through sheetrock and have a thin kerf profile to cut through wood, plastics, and delicate acoustic tile.
Requires only a hand drill with a 3/8" or larger chuck to cut holes from 1-5/8 inches to 8 inches in diameter and materials up to 1 inch thick. Infinite adjustment and measure bar is marked in inches
Make sure to measure the CUTOUT for the product (speaker, recessed light)
INSTRUCTIONS: Put one blade holder at "6" and the same with the opposite blade holder and the tool cuts a 6" diameter hole. Shield catches all the shavings and dust and holds the cut section. Does away with the mess and need for drop cloths.
ABS shield remains in place and the internal bearing allows the adjustable hole cutter to spin independent of the shield
Orange knob makes it simple to limit the cutting depth to reduce risk of cutting wires and pipes behind the sheetrock or paneling
Unlike single blade adjustable hole cutters there are no balance bars to change and nothing to break off and make the tool useless
No wobble as with single blade hole cutters so holes are perfectly round even when cut into soft sheetrock.
NOT FOR USE IN DRILL PRESS you are installing
The size of the product you are installing uses a larger cutout, and the needed size is different by manufacturer of the canned light or the speaker. As with any new tool, always test on a scrap piece of material to get familiar with the tool.
- Replaceable HSS Blades SKU HP1183 ASIN B07GY3Z25P
- Twin blades for perfect balance - no bars to change or threads to break off
- Ball bearing mounted strong ABS shield with soft silicon gasket dust seal
- 11" OD Shield - Cuts perfect holes from 1-5/8" to 8" - replacing hole saw kits with multiple saws
- Max cut depth: 1": cuts sheetrock, wood (NO PLYWOOD or PLASTER), melamine, acrylic sheet, soft acoustic tile, plastics
DEWALT DW660 Cut-Out 5 Amp 30,000 RPM Rotary Tool with 1/8-Inch and 1/4-Inch Collets
A durable and compact design for your rugged jobs. Change between bits fast & easily without a wrench. For safety & ease, the tool features a turn-on/bump-off switch allowing you to easily shut tool off. The slim package packs a punch with a 5.0 Amp, 30,000 rpm motor providing more cutting power. Designed for prolonged use, the switch is dust-sealed protecting against dust ingestion.
- DW660 Includes:1 drywall cutting bit and 1/4", 1/8" collets
- Turn-on/bump-off switch allows user to easily shut tool off
- 5-amp, 30,000 rpm motor provides more cutting power
- Slim body design for less fatigue over prolonged use
- Dust-sealed switch protects against dust ingestion for longer switch life
- 120v ac 5.0 amp
General Tools 55 Heavy Duty Circle Cutter. Adjustable 1-3/4 Inch to 7-7/8 Inch
Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter. The tempered steel body features marked graduations on the beam for fast measurement and application. #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM. This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round. All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill.
GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, were proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.
For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100 satisfaction.
WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS
- Designed for professional use, the Heavy Duty Circle Cutter will make clean cuts from 1-3/4 to 7-7/8 inch diameter
- The tempered steel body features marked graduations on the beam for fast measurement and application
- #55 Heavy Duty Circle cutter is designed with a 1/2 shank for drill press use only; Maximum safe speed is 500 RPM
- This round shank circle cutter is great for making smooth cuts through most materials, including wood, composite, sheet metal and more; Shank is 1/2 inch round
- All adjusments are made with a hex wrench which is included; Replacement blade is General Tools Model # 55 Blade, replacement drill is General Tools Model # 5/6/55 Drill
120 To 3000 Assorted Grit Sandpaper for Wood Furniture Finishing, Metal Sanding and Automotive Polishing, Dry or Wet Sanding, 9 x 3.6 Inch, 36-Sheet
All you need is here
A perfect sanding work obviously needs at least several grade of sandpapers. This sandpaper assortment including 12 types of grit, cover all you need from art and craft, wood work, automotive, metal, and plastic applications for buffing and polishing.
Material: Silicon carbide
Size: 9 x 3.6 inches
Weight: 5.82 ounces
- 3x120 Grit Sandpaper
- 3x220 Grit Sandpaper
- 3x320 Grit Sandpaper
- 3x400 Grit Sandpaper
- 3x600 Grit Sandpaper
- 3x800 Grit Sandpaper
- 3x1000 Grit Sandpaper
- 3x1200 Grit Sandpaper
- 3x1500 Grit Sandpaper
- 3x2000 Grit Sandpaper
- 3x2500 Grit Sandpaper
- 3x3000 Grit Sandpaper
120 to 220 grit: for rough sanding and removing scratch.
320 to 400 grit: for light sanding between coats of finish, or to sand metal and other hard surfaces.
400 to 800 grit: for final finishing before painting.
1000 to 1500 grit: for sanding between coats.
2000 to 3000 grit: for buffing.
- MEETS ALL YOU NEED - Including 3 sheets of each grit: 120/220/320/400/600/800/1000/1200/1500/2000/2500/3000, total 36 sheets.
- PREMIUM QUALITY - Made of waterproof silicon carbide, electro coated ensures the grit distributed homogeneously, good for wet / dry sanding.
- MULTIFUNCTIONAL - Suitable for use in art and craft, wood work, automotive, metal, and plastic applications for buffing and polishing.
- EASY TO IDENTIFY - The grits of the sandpaper are printed on the back for easy identification.
- Product size: 9 x 3.6 inches, also can be cut into any smaller size you need easily.
Rockwell RK5151K 4.2 Amp Sonicrafter F80 Oscillating Multi-Tool with Duotech Oscillation Angle Technology. 12 Piece Kit includes 10 Accessories, Carrying Bag, and Oscillating Tool
The new Rockwell Duotech Oscillation Sonicrafter F80 is the first oscillating multi-tool that provides a choice of two oscillating angles: 5.0 o and 3.4 o. Users can choose the 5.0 o oscillating angle when projects require fast, aggressive cuts and quicker results, or the 3.4o angle for precision and continuous control. The versatile F80 works harder and faster than any other multi-tool, while enabling the user to choose the oscillating angle that best suits the job at hand. The handcrafted F80 can be used at a 5.0o oscillating angle with an end-cut blade to make short work of cross-cutting, ripping or making plunge-cuts in wood. Trim doorjambs or cut PVC. Then switch to the 3.4o angle to clip nail heads or cut metal pipe. Or using a rigid scraper blade, remove blistered paint, take rust from bare metal for priming or scrape and remove hardened caulk or adhesives. Clamp on a carbide grit semicircular blade to grind old grout from between floor or wall tiles. The cutting speed of the handcrafted F80 is five times faster than the basic Sonicrafter F50 (RK5121K). The F80, with an industry-leading maximum cutting load of 35 lbs. of force, can be pushed harder than any other multi-tool without stalling the blade.
- Duotech oscillation technology lets you select the optimum oscillation angle for power and precision
- Variable speed dial for precision control - from 10,000 to 19,000 oscillations per minute
- Powerful 4.2 Amp motor delivers constant speed and won't stall under heavy loads
- Hyperlock tool-free blade change system provides 1 ton of clamping force - prevents slipping during use, no matter the blade angle
- Universal Fit System accepts all major brands of blades, sanders, and other accessories
SMARTSTANDARD 6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to install -Includes Step-By-Step Installation Instruction Fit 36"-40" Wide Door Panel (I Shape Hanger)
If you want to buy extra sets of I-Shape Hanger to install more doors, Please buy our I-Shape Hanger( ASIN: B01LOCZEI0 Listing Link: https://www.amazon.com/dp/B01LOCZEI0 ) ,This I-Shape hanger is compatibale with our I-Shape sliding door hardware kit.
This new SMARTSTANDARD Country Black Steel Sliding Barn Wood Door Hardware can transform your doorway into a side sliding entry. This is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way.
1. Hole spacer of the rail is 16". It is good for the wall stub.
2. Detailed instruction: use both words and pictures to display the steps of installing the barn door hardware.
3. All the measurements are in inch rather than in centimeter.
4. All our products have "SmartStandard" Logo on the package.
IMPORTANT: Only SmartStandard is the legal seller of this product. All product from other sellers are fake imitation and not under warranty policy.
- WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience.
- SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
- PACKAGE INCLUDED: A Barn Door Hardware Kit (2x 3.3FT Rails, 5x Rail Spacers, 2x Rollers, 2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
- DOOR WEIGHT CAPACITY: 220 lb, Fit door panel width: 36"-40", Fit door panel thickness: 1 3/8" and 1 3/4".
- THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.
Sun Joe SPX4000 2030 PSI 1.76 GPM 14.5-Amp Electric Pressure Washer w/ Pressure-Select Technology
You name it. You aim it. Grime is gone. Tackle your toughest home, outdoor & auto cleaning projects with ease with the sun Joe SPX4000 electric pressure washer! packed with 1800W of pure power, the 14.5-Amp motor generatesup to 2030 PSI to demolish every last bit of dirt, grease, Gunk & grime. Five quick-connect tips allow you to go from intense jet to gentle spray to suit the cleaning task, & the onboard 54.1 fl oz detergent tank lets you dial-in just the right amount of detergent to give your cleaning blast a boost! featuring sun Joe's exclusive pressure-select technology, the SPX4000 lets you pick the perfect pressure to combat dirt & grime with professional results, & a total stop power-saving system designed to save energy & prolong pump life when the trigger is not engaged. CUT your outdoor cleaning chores down to size, & go with Joe - the SPX4000 electric pressure washer from sun Joe. Get equipped. We recommend using our line of pressure washer detergents with our pressure washers. These include our Car Washes (available in Pineapple, Coconut, and Orange Vanilla scents), our Heavy Duty Cleaner/Degreaser, and our House and Deck Wash
- Powerful 14.5 amp motor generates up to 2030 PSI/1.76 GPM for maximum cleaning power
- Easy-glide wheels for maximum maneuverability. Hose Thread : M22
- Pressure Select Technology: Choose from two powerful cleaning options - LOW/1450 PSI for everyday dirt, grease grime, and HIGH/2030 PSI to tackle your toughest cleaning tasks.
- 5 Quick-Connect spray tips (0, 15, 25, 40, soap) tackle light, medium and heavy duty cleaning tasks
- Includes an extension wand and a 20-foot high pressure hose, power cord with GFCI protection, garden hose adapter and needle clean-out tool
Karcher 15-Inch Pressure Washer Surface Cleaner Attachment, 3200 PSI Rating
Karcher 15" surface cleaner works in tandem with your gas pressure washer (up to 3200 PSI) to quickly deliver professional level cleaning without splash back. It cleans an area 15" wide with two spinning nozzles instead of one, reducing your cleaning time, & eliminates streaks by keeping the nozzles at a fixed height from the surface. Also cleans vertical surfaces including garage doors & home siding. Quick connect for compatibility with a wide range of electric pressure washers. Get pro cleaning results with the help of karcher's 15" surface cleaner.
- The Karcher Promise: Cleaner. Quicker. Delivers professional level cleaning over an area 15" wide with two spinning nozzles
- Cleans flat surfaces up to 4x faster than standard spray nozzles
- Compatible with gas power washers (up to 3200 PSI) with " quick-connect fitting. Product dimensions(L x W x H): 15 x 15 x 6.7 inches
- Compatible machines g2700, g2700r, g2900x, g3000, g3000k, g3000 x, g3000 xk, g3100 xh, g3200 x, g3200 xk, g2200, g2600 vh, g3000 oh, g3050 ohc, g3200 oc, g3200 oct, g3200 oh, g3200 xc and g3200 xh
- Eliminates streaks by keeping the nozzles at a fixed height from the surface
- Perfect for cleaning large surfaces such as driveways, patios, decks, and sidewalks
- Also cleans vertical surfaces including garage doors and home siding
- Rotation speed (rpm): 1500. Splash-free skirt keeps you dry while you clean
Hole Pro X-305 1-7/8" to 12" TWIN BLADE ADJUSTABLE Pro Hole Saw Cutter Cuts Plywood Sheetrock Plaster Fiberglass OSB Plastic MDF Hardie: Includes Tungsten Carbide & HSS blades
Adjustable hole cutter kit
One hole saw kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed.
Twin blades with infinite adjustment 1-7/8" to 12" for faster cutting of recessed light cans and most ceiling speakers with perfect balance.
Cutting depth 1-1/8" from a side, 2-1/4" if can be cut from two sides
No need for balance bars which can break off
-Pro grade adjustable hole cutter
-Ball bearing mounted ABS shield with soft silicon rubber gasket to trap the dust and shavings
-Sturdy Carry Case
-Replaceable blade sets of BOTH HSS (located in the upper right hand corner of the carry case) for wood, plastics, acoustic tile, tongue & groove, laminates, rubber AND TUNGSTEN CARBIDE blades (installed in the hole cutter) for drywall, plaster, Hardi board, fiberglass, chipboard, plywood, MDF
The depth control knob helps to avoid accidental cutting of wires or pipes in walls or ceilings.
Please visit www.holepro.com for product videos and details about our products.
Vacuum adapter (HP1174 -- NOT INCLUDED) available for connecting shop vac where asbestos or lead paint exists
Cut holes in plywood up to 8" in diameter with 18 volt cordless drill
Like all Hole Pro Power Series kits the safety dust shield (14" OD) can be used with the Hole Pro XL-Arbor kit (HP1168 -NOT INCLUDED) to enable the use of specialty hole cutters such as tungsten grit cutters when cutting tile or stone and have the same dust control and depth control as the adjustable hole cutters
5 year warranty against defects (except when used in commercial drill presses).
Do NOT USE with STUD DRILLS
NOT MADE FOR USE WITHOUT PILOT BIT
- Twin blades for faster/smoother cutting, strong shield traps dust & controls cutting depth
- User replaceable High Speed Steel and Tungsten Carbide Blades with 1-1/8" cutting depth
- Cuts plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc.
- 14" OD - Adjusts infinitely for holes 2" to 12", Shield turns drill into portable drill press to use anywhere
- Complete kit - add your 1/2" drill chuck - Needs power of hole saws so bigger holes easily cut
TACKLIFE Circular Saw with Metal Handle, 6 Blades(4-3/4" & 4-1/2), Laser Guide, 5.8A, Max Cutting Depth 1-11/16'' (90), 1-3/8'' (0-45), Ideal for Wood, Soft Metal, Tile and Plastic Cuts - TCS115A
Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.
Both the laser and scale ruler design make the cutting more straight and professional;
Both depth and bevel cutting, maximum cutting depth at 90 degrees is 1-11/16'' (43mm) and bevel capacity at 45 degrees is 1-1/8''(28.5mm)
The left-handed blade design provides remarkable cut-line visibility;
Strong power design, 710 W /5.8 A(900W, 7.5A),deliver full-size performance at 3,500 rpm;
Metal guard protect the spark from hurting your hand and destroying the saw handle;
Motor postposition separates the gravity center of the saw to suit for you hand grasp;
Two switches control operation for safety;
With 6 blades lasts it a longer cutting life,and 24 teeth TCT blade for wood and plastic cutting,60 teeth HSS blade metal cutting, grit diamond blade for tile cutting;
With Allen wrench for blade change easily, and Dust extraction adapter keeps the cut line free of dust for improved visibility.
How to change saw blade of electric circular saw:
Press and hold the locking button (the orange button, which is on the right side of the handle at the end of the machine shell)
and change the saw blade with the six angle wrench in the same time.
Rated Power:710W( equivalent to 900 W)
Max Cutting Depth:
90: 43mm (1-11/16")
45: 35mm (1-1/8")
No Load Speed: 3500 rpm
24 teeth TCT blade:
115mm x 9.5mm x 24T
60 teeth HSS blade:
115mm x 9.5mm x 60T
grit diamond blade:
115mm x 9.5mm x 60m
1* Tacklife TCS115A Compact Laser Circular Saw
1* Hex Key
1* Guide Fence Slot
1* Adjustable Vacuum Adaptor
1* User Manual
1* Warranty Card
1* 24 month Warranty
- METAL HANDLE & LASER DEISGN: Comes with an unique metal handle, which helps to reduce fatigue for one-hand working, offering stronger clamping force to make the cutting more stable. Easy and quick to install and disassemble by rotating the handle without any auxiliary tools. The laser guide ensures a professional and precise cutting line, convenient for cutting.
- POWERFUL MOTOR & 6 BLADES: Features a 5.8 Amps copper motor to deliver full-size performance at 3,500 rpm, making cut wood, plastics, plaster board, PVC pipe, tile with ease. 6 Blades: 2x24T TCT(120mm) for wood cuts/ 2x60T HSS(115mm) for wood and soft metal cuts/ 2pcs grit diamond blade(115mm) for tile cuts, extending the applications of the compact circular saw.
- FLEXIBLE 90 & 45 BEVEL CUTTING:Easy-set depth scaled gauge lever allows the cutting depth up to 1-11/16 inches(42.9mm) at 90; The bevel capacity at 45 is 1-3/8 inches (34.9mm), you can decide your bevel cutting angle freely from 0 to 45. Left-sided blade design for great cut-line visibility. A parallel guide attachment ensures straight, precise cuts easily and quickly.
- SAFETY DESIGN & ERGONOMIC DESIGN:The double protection switch prevents the machine from accidentally opening, promises a safer cutting job. Motor postposition separates the front and rear gravity, promises a stable operation; Optimized ergonomic slim grip provides ease and less fatigue to one-handed operation.
- VALUABLE ACCESSORIES: You will get:1XTacklife TCS115A circular saw; 6 blades(2x120mm for wood cuts/2x115mm for wood and soft metal cuts/2x115mm for tile cuts); 1Xmetal handle; 1Xparallel guide; 1Xelbow dust port; 1Xhex key; user manual; 2-year warranty card.
- Drilling holes in glass aquarium
- Buy combo washer dryer
- Womens weight loss supplement
- Accessories for apple watch 2
- Snow cone flavor
- Of clinique
- Accurate thermometer