VIVOHOME Steel Hydraulic Motorcycle ATV Lift Jack Hoist Stand 1500Lb
VIVOHOME is a US registered trademark based on California. We are devote ourselves to offering high quality products at the most reasonable prices. Hope you could find your favorite collections from us.
1. Place jack on a hard level surface
2. To avoid them form slipping during the raising operation. ALWAYS first determine the center of the weight load.
3. Place the jack under the item so that the lift saddle is positioned under the center of the weight load.
4. Pump the foot pedal until the lift saddle comes in contact with the load to be lifted: proceed to lock wheel casters. ALWAYS check to be sure that the saddle and the load are postioned correctly before raising the jack.
5. Use foot pedal to raise load: Be sure that safety lock is secured in one of three stated lock positions once desired height is reached.
6. Apply tie-down straps once load has been raised to desired height. Thoroughly tighten straps.
7. Stabilize loaded jack on a hard surface for maximum balance by adjusting locking screws.
-Color: Red, Black
-Package Dimensions: 32.28"L*16.34"W*4.92H"
-Item Weight: 62lbs
-1 x Lift Jack
-1 x Handle
-2 x Tie-Down Straps
-2 x Adapter Bars
-1 x Manual
We assure the item you received is 100 safe and sound. For any defective item, please contact our customer service for satisfaction guaranteed solution.
- COMPACT AND FUNCTIONAL - This compact hydraulic jack makes it safe and easy to service your motorcycle or ATV through a simple lifting mechanism able to hoist up to 1500 lbs
- HIGH-QUALITY MATERIALS - Made with a durable steel frame and high-quality, non-slip rubber lift pads, this jack is able to lift your machine without damaging it
- SAFETY FIRST - With a 3-position safety lock mechanism, fix your vehicle without worry
- EASY TRANSPORT - Built with a handle and swivel casters, the jack is easy to transport and simple to stow
- MANUAL AND AUTOMATIC - The jack can be operated manually by foot pedal or it can be attached to a compressed airline and operated by a pneumatic lift cylinder. Comes with two tie-down straps, two adapter bars, and a detachable handle
Pit Posse Motorcycle ATV Scissor Floor Jack Lift Table Stand - 13 inches Thru 36-inch-High Stable Safe Comfortable 2 Years Warranty
Pit Posse just made working on your bike extremely comfortable. No more sitting in uncomfortable positions to get work done, we present the ultimate bike stand.
Hydraulic Scissor Lift lifts your bike to a comfortable work height
Foot pedal incorporated to lift stand effortlessly
Adjustable height, from 13 thru 36 inches off the ground
Top platform at 13 3/4 x 16"
Safety loops to stabilize the bike and safety pin for extra insurance
Heavy-duty steel frame construction
Large oil drain hole
Oil & gas resistant rubber top
300 lbs. weight capacity
2 Year Warranty
Professional shop hydraulic floor jack stand that is designed to maximize your workspace. Read our reviews and see why bike enthusiasts are raving about this stand!
🔥 ADD TO CART NOW RISK-FREE WITH OUR 2 YEAR WARRANTY! 🔥
- A PROFESSIONAL LIFT FOR YOUR HOME/GARAGE/SHOP- This hydraulic scissor lifter is designed to allow you to repair your motorcycle, ATV, and dirtbike smoothly. Perfectly centers your bike with both wheels in the air, and you can adjust the height anywhere between 13 inches thru 36 inch off the ground. The top platform is flat and is 13.75 x 16 inch. This lift's capacity is up to 300 pounds.
- SAFELY WORK ON YOU BIKE WORRY FREE- This jack stand is heavy duty, made with thick gauge metal and keeps your bike safe. Includes safety loops that will help secure the bike and the heavy-duty steel frame construction and rubber pad make this lifter movement resistant and prevents metal to metal contact that can scratch, scuff and scrape your motorcycle.
- EASY TO OPERATE CLEAN WORK ENVIRONMENT- The lift has foot pedals with a hydraulic lift to make it quick and easy to lift or lower the stand, there is a large oil drain hole in the middle of the platform, and the top is made of rubber that is oil & gas resistant.
- DESIGNED FOR COMFORTABLE USE AND STORAGE- The scissor jack stand is sufficient to hold the bike's tires off the ground to store in the winter. The lift table eliminates the need to stoop or kneel while working on your motorcycle, giving you a comfortable work environment. The wide top platform makes the stand safer and distributes the weight on a broader area preventing accidental slips or movements.
- YOUR SATISFACTION IS OUR #1 PRIORITY- Pit Posse's stand is one of the best in the market. If you read the reviews, you know our lift is well known and used in many shops daily to ease the process of working on your bike. If you are not 100 satisfied, we will give you a full refund or a free exchange, no questions asked. We have a 2-year warranty! Send us a message, and we will gladly assist.
Dilated Motorcycle Center Scissor Lift Jack Flat Stand Hoist, Garage Maintenance Repair Tools, with Socket
Fit most motorcycle models, such as honda, harley davidson, yamaha, bmw, etc.
Minimum Height: 3-3/4 in.
Maximum Height: 13-2/5 in.
Weight Capacity: 1,000 lbs.
Platform Dimensions: 9-4/5 in. x 15-3/4 in.
Material: Steel(body,sleeve), Rubber(deck)
Surface: Paint(oil-, grease- and dirt-resistant)
1 x Motorcycle Jack
1 x User Manual
1 x Sleeve
- 🚲 1,000 lbs scissor lift jack for motorcycles with flat bottom, 1 year warranty.
- 🚲 Lift Range: 3-3/4 in. to 13-2/5 in, come with an easy operate sleeve(steel).
- 🚲 Platform Dimensions: 9-4/5 in.(L) x 15-3/4 in.(W), safe rubber wide deck.
- 🚲 Durable heavy duty steel body, easy cleanup paint (oil-, grease- and dirt-resistant).
- 🚲 Avoid using an impact wrench; improper usage may cause damage to nut, lift a motorcycle easily by rotating the metal sleeve, instruction included.
Extreme Max 5001.5083 Hydraulic Motorcycle Lift Table 300 lb.
Lifting up to 300 lbs., the Hydraulic Motorcycle Lift Table is perfect for tinkering on your dirt bike or small motorcycle. Set your bike on the table, secure it through the foot pegs with the included fasteners and lift away with the easy-to-use foot pedal; no tools required. Rising to a maximum height of 34.5, the lift table eliminates the need to stoop or kneel while working on your bike. Once the desired height is achieved, a locking bar secures the height, ensuring the lift never drops from accidental contact with the release pedal. All necessary hardware included. Lifted Height: 34.5". Collapsed Height: 13.25". Platform Dimensions: 16.25" Length x 13.25" Width. Lift Capacity: 300 lbs.
- Lift your dirt bike or small motorcycle up to 34.5"
- Padded 16.25" x 13.25" rubber platform prevents the bike from scratching and scraping
- Easy to use foot pedal operation for raising and lowering
- All hardware included
- Maximum weight capacity: 300 lbs.
PowerZone 380047 1700 LB Hydraulic Motorcycle/ATV Jack
PowerZone 1700LB capacity hydraulic Motorcycle/ATV Jack lifts motorcycles and ATVs from 4-1/2" to 14-1/2". Foot activated hydraulic pump leaves both hands free for positioning and stabilizing motorcycles and ATVs. Safety lock with multiple locking positions. T-Handle provides secure grip and can be removed. Rubber grip saddle pads protect motorcycle/ATV frame. Collapses to just 4-1/2 high for easy storage. Heavy duty steel construction is built to last.
- Rated Capacity: 1700LB. Lifting Range: 4-1/2" to 14-1/2". Heavy duty steel construction is built to last.
- Foot activated hydraulic pump leaves both hands free for positioning and stabilizing motorcycles and ATVs
- Safety lock with multiple locking positions. T-Handle provides secure grip and can be removed.
- Rubber grip saddle pads protects motorcycle/ATV Frame
- Collapses to just 4-1/2" high for easy storage
Extreme Max 5001.5044 Wide Motorcycle Scissor Jack
The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14 while the 15-1/8 x 9 platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8 socket or wrench (sold separately). Measurements: Extended height: 14; Collapsed height: 3-3/8; Base: 15-1/8 x 9; Lifting platform: 15-1/8 x 9. *Do not use an impact-style wrench to raise or lower the jack.
- Extends up to 14" height
- Designed for center lifting using 7/8" socket or wrench (sold separately)
- Durable rubber padding on platform
- Heavy-duty steel frame
- 1100 lb. weight capacity; will not lift trikes
APlusLift 1500LB Air Operated 48" Width ATV Motorcycle Lift Table with Side Extensions (Free Service Jack, Free Home Delivery)
APlusLift MT1500 is a 1500lb Heavy Duty Air Operated Lift Table. It is one of the most popular lifts with a Front Wheel Clamping Vise, a Drop Out Tail, a 3 Stage Adjustable Front Extension, a 20" long Drive-on Approach Ramp, and a FREE Service Jack.Specification
- Adjustable Table Lengths: 84" - 97" - 110"
- Weight Capacity: 1,500 LB
- Table Length with Approach Ramp: 128"
- Table Length without Approach Ramp: 110"
- Adjustable Front Extension: 84" (Table Alone), 97" (Stage 1 Extension), 110" (Stage 2 Extension)
- Stage 1 Extended Length with Approach Ramp: 115"
- Stage 1 Extended Length without Approach Ramp: 97"
- Stage 2 Extended Length with Approach Ramp: 128"
- Stage 2 Extended Length without Approach Ramp: 110"
- Drop Out Tail Dimensions: 14" x 21"
- Removable Approach Ramp Length: 20"
- Table Width without Extension: 24"
- Table Width with Extension: 48"
- Table Steel Thickness: 1/8"
- Safety Locking Positions (to top of table): 19.5", 21.75", 23.5", 25", 27", 28.5", 30"
- Maximum Lifting Height (to top of table): 33"
- Lowered Height (to top Of table): 7"
- Lifting Table Surface Area with Extension: Table: 48" x 84"; Stage 1 Ext.: 48" x 97"; Stage 2 Ext.: 48" x 110"
- Service Jack: Max Lifting Height: 15"; Lowered Height: 3.5"; Weight Capacity: 1,000 LB
- Air Requirements: 90-110 PSI
- Shipping Weight: 500 LB
- Two Years Parts Warranty
- 8.8 Construction Grade Hardware
- Stable Scissor Frame with Precise Pivot Shafts and Thick Gauge Steel
- Strong and Durable Paint
- Free Service Jack
STKUSA Motorcycle Scissor Jack Lift, 1100 Lbs, w/Dolly Bike Rack and Wheels
This sturdy and easy to use motorcycle lift provides an easy / safe way to lift and work on your motorcycle or atv. The rubber mat that is located at the top of the lift is to help secure and protect the vehicle when being lifted off the ground.The jack was designed to be used in a garage, shop, or track with the proper tools and equipment.
- Includes a rubber padded platform to protect motorcycle undercarriage during lifting and storage
- Comes with a 7/8" socket or wrench
- Raises and lowers a motorcycle weighing up to 1,100 lbs
- Comes with 4 steel caster wheels which bolt directly to the dolly tray
- Made with all steel construction; Sturdy design
1100Lbs Motorcycle Scissor Center Jack Lift Repair Stand
- Ideal for lifting most motorcycle, ATV and bike frames
- Lift weight capacity: 1100 Lbs
- Lifting range: 3-3/4" to 15-3/4" without saddles and adapters
- Removable crank handle: 6"; Maximum lift height: 14"
- Wide base with wing on each side for stability; Made of solid steel for high durability
LiftMaster 1100 LB Motorcycle Center Scissor Lift Jack with Safety Pin Hoist Stand Bikes ATVs
- Capacity: 1100 lbs (500kgs)
- 2 screw adapters for variable height adjustment
- Lifting Range: 3.5"( 90mm) to 15 3/4"(400mm) without 2 saddles and adapters
- Simple crank operated jack
- Safety Pin with 6 locking positions to prevent accidental drops
- Nonstick saucepan
- Educational gifts for 7 year olds
- Mens best multivitamin
- Hockey sticks 2018
- Natural remedies for cushing disease in dogs
- Padlocks reviews
- Ir temperature gun