Cutting hardened steel

Migiwata Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

M35 Grade Cobalt Steel

Cobalt drill bits are not made of pure cobalt, but rather a steel alloy with certain percent cobalt. The 5-percent alloy is known as M35 grade. The cobalt increases the strength of the steel and makes it more heat-resistant.

135 Degree Split Point

The flater the drill, the smaller the chip width. This means less force required to remove metal, compared with lower angles like 90 and 118. This is important on hard stuff, because your power requirements are already more than mild steel, so making the chip load less helps. It also reduces heat since less surface area is generating the cut.

Lowest Cost Per Hole Drilled

Cobalt drill bits are more expensive than other drill bits, but if you regularly drill through metal, they are a good investment since they tend to last longer. With an extended tool life, Migiwata cobalt drill bits will give you the lowest cost per hole drilled.

For Drilling Stainless Steel

This set of Migiwata M35 cobalt steel drill bits are particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.

Tests shows that the M35 cobalt steel drill bits can penetrate a 5mm-thick 304 stainless steel plate in 5 seconds.

Not Suitable for Hardened Steel

M35 grade cobalt drill bits are NOT suitable for hardened steel, high carbon steel and heat-treated steel by the experiences of some customers, although some others said they worked well with hardened steel.

Cooling Liquid Required

Please use with cooling liquid to prolong the working life of the drill bits and to avoid overheating and breakage.

BUY WITH CONFIDENCE:

If you're not completely satisfied with the product quality, please contact us. Refund or free replacement.

Buy cutting hardened steel from Amazon.com
  • COBALT STEEL - Manufactured from M35 cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, extremely heat resistant; for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit.
  • NO CENTER PUNCH NEEDED - The 135 Quick-Cut points are self-centering and penetrate quickly with less pressure. Will not "walk" or "wander". Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks. Must be used and operated at proper RPMs for maximum efficiency
  • 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too.
  • SATISFACTION GUARANTEED - Here at Migiwata, we do care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.






Buy cutting hardened steel from Amazon.com


Titan 66" Bucket Cutting Edge Hardened 1055 Carbon Steel 3/4" Tractor Loader

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

The weld on bucket cutting edge from Titan Attachments is made from hardened 1055 Carbon steel to maximize the performance and reduce wear. The bar comes unpainted so you can weld it immediately.

Features: 
- Weld on to most buckets 
- Bolt on after drilling holes 
- 1055 Carbon Steel 
- Comes unpainted

Specifications:

- Length: 66" 
- Width: 6" 
- Thickness: 3/4" 
- Cutting edge: 1/8" 
- Weight: 77 LB

Buy cutting hardened steel from Amazon.com
  • Weld on to most buckets - Bolt on after drilling holes
  • 1055 Carbon Steel - Comes unpainted
  • Length: 66" - Width: 6"
  • Thickness: 3/4" - Cutting edge: 1/8"






Buy cutting hardened steel from Amazon.com


Toledo Pipe H6S - QTY 4 Hardened Steel Cutting Wheels for H6S Hinged Pipe Cutter fits REED WHEELER REX

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

Toledo Pipe H6S - QTY 4 Hardened Steel Cutting Wheels for H6S Hinged Pipe Cutter fits REED WHEELER REX

Replaces REED 03506 HS6, 03507 HSI6-8 Cutting Wheels

Set of Four Hardened Steel Cutting Wheels for H6S Hinged Pipe Cutter

Fits Pipe Cutters:

  • Toledo Pipe Tools H6S 4"-6" Hinged Pipe Cutter
  • REED H6S Hinged Pipe Cutter
  • WHEELER REX 95061 4"-6" Hinged Pipe Cutter

Cutter Wheel Replacement:

  • Toledo Pipe Tools - TP-H6SCW - Steel, Stainless Steel
  • REED 03506 - HS6 - Steel, Stainless Steel
  • REED 03514 - HX6 - Steel, Stainless Steel, Schd 80
  • REED 03507 - HSI6-8 - Steel, Stainless Steel, Cast Iron, Ductile Iron
  • REED 03524 - HI6 - Cast Iron, Ductile Iron
  • REED 03525 - H6PSE5 - Steel, Cast Iron, Ductile Iron
  • WHEELER REX 8052 - Steel, Stainless Steel

The product is designed and manufactured by Toledo Pipe Tools.

RIDGID Marks are trademarks of RIDGID, Inc and are used for product identification purposes only. REED Marks are trademarks of Reed Manufacturing Company and are used for product identification purposes only. WHEELER REX Marks are trademarks of Wheeler-Rex Inc. and are used for product identification purposes only.

Toledo Pipe Tools does Warranty this item against manufacturer Defects for One Year.

Buy cutting hardened steel from Amazon.com
  • Set of Four Hardened Steel Cutting Wheels for H6S Hinged Pipe Cutter
  • Fits Pipe Cutters: Toledo Pipe Tools H6S 4"-6" Hinged Pipe Cutter,
  • REED H6S Hinged Pipe Cutter, and WHEELER REX 95061 4"-6" Hinged Pipe Cutter
  • Cutter Wheel Replacement: REED 03506, 03514, 03507, 03524, 03525, WHEELER REX 8052


Buy cutting hardened steel from Amazon.com


Titan 60" Bucket Cutting Edge Hardened 1055 Carbon Steel 1/2" Tractor Loader

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

The weld on bucket cutting edge from Titan Attachments is made from hardened 1055 Carbon steel to maximize the performance and reduce wear. The bar comes unpainted so you can weld it immediately.

Features: 
- Weld on to most buckets 
- Bolt on after drilling holes 
- 1055 Carbon Steel 
- Comes unpainted

Specifications::
 
- Length: 60" 
- Width: 4" 
- Thickness: 1/2" 
- Cutting edge: 1/8" 
- Weight: 33 LB

Buy cutting hardened steel from Amazon.com
  • Weld on to most buckets - Bolt on after drilling holes
  • 1055 Carbon Steel - Comes unpainted
  • Length: 60" - Width: 4"
  • Thickness: 1/2" - Cutting edge: 1/8"
  • Weight: 33 LB







Buy cutting hardened steel from Amazon.com


Meyer Products, LLC 8278 Home Plow Steel Cutting Edge Kit

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

The home plow steel cutting edge is manufactured with specially hardened steel to meet the demands of a tough environment. replacement cutting edges are sold as complete kits including attaching hardware and edge.

Buy cutting hardened steel from Amazon.com
  • Manufactured with specially hardened steel
  • Handles a tough environment
  • Includes attaching hardware and edge
  • Standard Equipment
Buy cutting hardened steel from Amazon.com


Pandahall Jewelry Pliers End Cutting Pliers End Nipper Pliers Cutting Tools Polishing Carbon-Hardened Steel 10.5cm

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

Jewelry Pliers, End Cutting Pliers, Polishing, Carbon-Hardened Steel

Size: about 10.5cm long.(1"=24.5mm)

Material: Stainless Steel nippers with rubber handle (plastic)

Suitable for wire cutting, wire work, beading, jewelry making or jewelry finding repairing.

These pliers are end cutting pliers, and the carbon content of its material is 0.45 percent. These pliers work well on precious metals and soft craft wires. You can cut whatever size of buttcockline by these end cutting pliers.

Buy cutting hardened steel from Amazon.com
  • Jewelry Pliers, End Cutting Pliers, Polishing, Carbon-Hardened Steel
  • Size: about 10.5cm long.(1"=24.5mm)
  • Material: Stainless Steel nippers with rubber handle (plastic)
  • Suitable for wire cutting, wire work, beading, jewelry making or jewelry finding repairing.
  • These pliers are end cutting pliers, and the carbon content of its material is 0.45 percent. They work well on precious metals and soft craft wires. You can cut whatever size of buttcockline by these end cutting pliers.



Buy cutting hardened steel from Amazon.com


COMOWARE Cobalt Drill Bit Set- 13Pcs M35 High Speed Steel Twist Jobber Length for Hardened Metal, Stainless Steel, Cast Iron and Wood Plastic with Metal Indexed Storage Case, 1/16"-1/4"

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

Specifications:

Material: HSS M35 Cobalt 5

Angle Point: 135 Degree

Flute Type: Spiral

Shank Type: Straight Shank

 

All woodworkers need this set. This 13 pieces Drill Bit Set contains the most popular range of drill bits - sizes 1/16" to 1/4"., and it comes in a portable case. And all drills can be used for cutting metal, plastic, wood, etc. HSS M35 with 5 Cobalt provides ultimate higher heat and abrasive resistance which ensures a longer service life. 

Buy cutting hardened steel from Amazon.com
  • 13 PIECES INCLUDED: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4".
  • HSS WITH 5 COBALT: Durable, Higher Heat & Abrasion Resistance.
  • PRECISE 135SPLIT POINT & TWIST DESIGN: Prevent walking, clear chips and particles faster.
  • PROFESSIONAL & WIDELY USE: M35 Cobalt HSS is more suitable for hardened material. Particularly successful in cutting through hard metals such as stainless steel, cast iron, high temperature alloy, titanium alloy, hard plastics and woods, and also can be used for softer materials.
  • ORGANIZED HOLDER: Set includes the drill bit holder with size index for easy storage and organizing.






Buy cutting hardened steel from Amazon.com


Titan 84" Bucket Cutting Edge Hardened 1055 Carbon Steel 5/8" Tractor Loader

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

The weld on bucket cutting edge from Titan Attachments is made from hardened 1055 Carbon steel to maximize the performance and reduce wear. The bar comes unpainted so you can weld it immediately.

Features: 
- Weld on to most buckets 
- Bolt on after drilling holes 
- 1055 Carbon Steel 
- Comes unpainted

Specifications:

- Length: 84" 
- Width: 6" 
- Thickness: 5/8" 
- Cutting edge: 1/8" 
- Weight: 79 LB

Buy cutting hardened steel from Amazon.com
  • Weld on to most buckets - Bolt on after drilling holes
  • 1055 Carbon Steel - Comes unpainted
  • Length: 84" - Width: 6"
  • Thickness: 5/8" - Cutting edge: 1/8"
  • Weight: 79 LB






Buy cutting hardened steel from Amazon.com


ShootingTargets7 IPSC AC Static Torso 1/4 inch AR500 Base Cap 12 x 24 inch for Pistols and Handguns

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

Ships Complete

Buy cutting hardened steel from Amazon.com
  • COMPLETE - Includes UNPAINTED 12 x 24 x 1/4 inch target, Powder Coated Base and Angled Cap Mount with 1/2 inch carriage bolt.Just add a 2x4 and get to shooting.
  • DURABLE - Base and cap mount are powder coated, all hardware is grade 5 and zinc plated so you can leave it out in the weather.
  • PROVEN - We use this same base with our steel challenge sets and have thousands in the field being used every day. Customers love it's durability and ease of assembly, you will too.
  • MORE STABLE - Static targets do not swing around or move when hit making them ideal for double tap drills and other types of speed drills.
  • FOR USE WITH - This 1/4 inch AR500 target is designed for use with ALL non magnum pistol rounds








Buy cutting hardened steel from Amazon.com


Andis Carbon-Infused Steel UltraEdge Dog Clipper Blade, Size-10, 1/16-Inch Cut Length (64071)

Buy cutting hardened steel
Check Price on Amazon
Buy cutting hardened steel from Amazon.com

Description:

The Andis Pet Ultra Edge Size is hand lapped, polished, and finished for superior cutting and specially hardened for long life. The Chrome finish resists rust and helps keep blades at optimum performance and the blade fit all Andis AG, MBG, and Oster A-5 models

Buy cutting hardened steel from Amazon.com
  • UltraEdge blades are constructed of carbonized steel for long edge life.
  • Chrome finish resists rust.
  • Fits Andis model detachable blade clippers: AG, AGC, AGP, AGRC, AGCL, AGR, AGRV, DBLC, MBG, SMC
  • Fits Oster A5 and Wahl KM Series
  • Always oil blade before, during and after each use


Buy cutting hardened steel from Amazon.com


Cutting hardened steel