Drill into metal stud

Stud Finder Sensor Wall Scanner - 4 in 1 Multi Function Electronic Stud Sensor Finders Wall Detector Center Finding with LCD Display for Wood AC Wire Metal Studs Detection (Stud Finder)

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:


Whether you're hanging a picture,mounting a TV,renovating part of your home, or working as a professional contractor, you need to know what is on the other side .Tavool stud finder is one of those tools that you will eventually need. Tavool stud finder can be the difference between a successful DIY home project and disaster.

Tavool stud beam finder is a device that is used to determine exact location of framing studs that are located behind the drywall. This Multi-scanner stud finder uses electronic signals to quickly locate edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.

The wall detector features large LCD display, ergonomic design and multi-sense technology for accurate detection of both metal and wooden studs. It will also detect live wiring up to two inches into walls. The four scanning modes (stud scan, deep scan, metal scan and AC scan) make it ideal for both tradesmen and home carpenters. With this device, you can immediately find a suitable place on the wall without making any extra holes

The cost of a stud finder wall scanner will almost always be less than the cost of repairing the damage done from not locating one before hanging something.
Nabini stud finder has changed the brand to "Tavool".ADD TO CART AND START YOUR PROJECT SAFE!

How to use an electronic stud finder detector?

Step 1: Install the 9v battery (not included in the package) & choose the mode.
Step 2: Place the device flat on the wall. Then press and hold the button while keeping the unit still until calibration is complete (1-2 seconds). When calibration is complete, the unit will sound a short beep and the display bars will be cleared.
Step 3: While holding on the button, move it along the desired surface to scan.
Step 4 : When the stud finder detects an object, it will beep continually and will display on the LCD screen.

Buy drill into metal stud from Amazon.com
  • The Most Accurate & Improved Safety - Tavool specializes in stud finder for years and adopts the most Advance Sensors Technology for accurately & quickly locating studs wood metal AC wires!For Safety, in all modes, this wall scanner always detect and indicate the Live AC Wire. Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in this electronic stud scanner
  • Upgrade Design of LCD Screen - Displaying the Desired Stud Material As Well As the Precise Position of the Stud - The Tavool digital stud scanner features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time and efforts, making the task completion EASIER
  • 4 IN 1 Multiplication Plus Deep Detection - This digital wall scanner includes four different scanning modes for woods, beam, joist, metals, AC wires and deeply embedded objects behind floor, ceiling, wall. Stud mode detects wooden beams and joists in drywall up to 1.2 inches. Metal mode detects pipe , rebar, aluminum and copper up to 1.57 inches.Deep mode detects wood and metal parts located up to 1.77 inches while 85240 volt AC current for voltage and live electrical lines up to 2.36 inches
  • Automatic Calibration and Ergonomic Grip for Comfortable Use - Turning on the stud finder and Completing Calibration until the BEEP sound and screen shows disappear. The automatic calibration before using provides users with maximum reliability and accuracy. Then put it on the wall. The wood beam finder will flash and beep once it has picked up the edge of a stud.The ergonomic design of this wall stud finder makes it comfortable to hold from any angle
  • Wide Use and 100 Warranty - This stud joist finder wall detector can quickly LOCATE the metal wood AC wire that are hidden in the walls, floors and ceilings of your house, help you avoid hazards while installing TVs, cabinets, garage shelves etc. This stud finder is covered by one years hassle-free warranty. Any problems under normal use in one year, please contact us and we will send new stud finder to you






Buy drill into metal stud from Amazon.com


IRWIN Tools Hanson Spiral Extractor and Drill Bit Set, 10 Piece, 11119

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

The IRWIN HANSON Spiral Extractor and Drill Bit Set, 10 Piece, features an aggressive left hand design for extra gripping power. Easy out style spiral flutes embed themselves deeper into the metal as the tool is turned so grip increases as resistance increases. With sizes etched onto each tool for quick identification, it includes EX-1, EX-2, EX-3, EX-4, and EX-5 extractors; 5/64", 7/64", 5/32", 1/4", and 19/64" drill bits and a metal index case.

Buy drill into metal stud from Amazon.com
  • Designed to remove broken studs, bolts, socket screws, and fittings
  • Aggressive left hand spiral design for extra gripping power
  • Easy out style spiral flutes embed themselves to increase grip as resistance increases
  • Extractor size and recommended drill bit size are etched on each tool
  • Set includes spiral flute screw extractors sizes EX-1, EX-2, EX-3, EX-4, EX-5; drill bit sizes 5/64", 7/64", 5/32", 1/4", 19/64", and a metal index case
Buy drill into metal stud from Amazon.com


SMARTSTANDARD 6.6ft Heavy Duty Sturdy Sliding Barn Door Hardware Kit -Smoothly and Quietly -Easy to install -Includes Step-By-Step Installation Instruction Fit 36"-40" Wide Door Panel (I Shape Hanger)

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

If you want to buy extra sets of I-Shape Hanger to install more doors, Please buy our I-Shape Hanger( ASIN: B01LOCZEI0 Listing Link: https://www.amazon.com/dp/B01LOCZEI0 ) ,This I-Shape hanger is compatibale with our I-Shape sliding door hardware kit.

This new SMARTSTANDARD Country Black Steel Sliding Barn Wood Door Hardware can transform your doorway into a side sliding entry. This is a popular new way to bring innovation into the home and close off bedroom and side room in a stunningly unique way.
1. Hole spacer of the rail is 16". It is good for the wall stub.
2. Detailed instruction: use both words and pictures to display the steps of installing the barn door hardware.
3. All the measurements are in inch rather than in centimeter.
4. All our products have "SmartStandard" Logo on the package.

Brand:SMARTSTANDARD
IMPORTANT: Only SmartStandard is the legal seller of this product. All product from other sellers are fake imitation and not under warranty policy.

Buy drill into metal stud from Amazon.com
  • WHY CHOOSE US: With 1/3 of the market price, you can get the same quality products here! Premium quality hardware kit are provided along with a completely turnkey experience.
  • SIMPLE AND EASY TO INSTALL: Professional instruction and customer service team help you solve all installation problems in time. Save the cost of finding a carpenter or decoration team.
  • PACKAGE INCLUDED: A Barn Door Hardware Kit (2x 3.3FT Rails, 5x Rail Spacers, 2x Rollers, 2x Door Stops,2x End Caps,1x Floor Guide,1x Hex Key;All other necessary hardware is included as you see in the pictures. For 16 inch stud.) DOOR NOT INCLUDED.
  • DOOR WEIGHT CAPACITY: 220 lb, Fit door panel width: 36"-40", Fit door panel thickness: 1 3/8" and 1 3/4".
  • THE BEST CHOICE FOR YOUR HOUSE: This modern twist on the classic barn door not only saves space, it allows the ability to open up multiple rooms without the annoyance of a swinging door.






Buy drill into metal stud from Amazon.com


CH Hanson 03040 Magnetic Stud Finder

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

CH Hanson 03040 Magnetic stud finder

Buy drill into metal stud from Amazon.com
  • Small and compact, easily fits in pocket
  • Powerful magnets allows hands free use
  • 2 way level for ease of marking
  • No batteries required. Scan Depth: 1 inch
  • Soft grip for easy grabbing and gentle touch




Buy drill into metal stud from Amazon.com


Zircon MultiScanner i520-FFP Center Finding Stud Finder with Metal and Live AC Wire Detection

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which acts as a live wire detector and finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. The Zircon MultiScanner i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MS i520, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

Buy drill into metal stud from Amazon.com
  • Zircon's MS i520 is a multi-surface scanner with 4 modes that detect studs, metal and live AC wiring to help you easily find studs and avoid hazards
  • Both StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar); AC Scan finds and traces live, unshielded electrical AC wires
  • WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
  • ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, while the Patented SpotLite Pointing System clearly indicates the target location
  • One fully charged 9V battery, not included, is required for the multi-surface scanner to run at optimal performance



Buy drill into metal stud from Amazon.com


Bosch Digital Multi-Scanner GMS120

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

Know what's behind the wall before you take on that job with a wall scanner! The Bosch GMS 120 Electronic Multi Scanner finds magnetic and nonmagnetic metals, power cables, wooden substructures and even plastic pipes! An audible alert and illuminated graphical display gives you the information you need to proceed with confidence.

Buy drill into metal stud from Amazon.com
  • DETECTION: The Bosch GMS120 Digital Wall Scanner features multi-mode laser detection for wood studs, metal objects (rebar, studs and steel/copper pipes) and live wiring.
  • PERFORMANCE: Features the latest three sensor laser technology, offering a wide range of detection performance of up to 4-3/4-Inch deep in cured concrete, up to 2 inches for live wiring, up to 3-1/8 inches for copper and up to 1-1/2 inches for wood studs. The accuracy of the product is 0.0625
  • SELF-CALIBRATING: Includes three selection modes for wood, metal, and AC wiring. The GMS120 offers automatic calibration from the start and continues to self-calibrate through the course of the project for easy and precise detection
  • DISPLAY: Features an illuminated graphical LCD display to indicate mode, detection strength, and more. The large detection ring flashes green for no object found, orange for object near and red for object found within the sensor range.
  • CENTER FINDER: This wall scanner includes a center finder that pinpoints the object center with an audible detection signal with an on/off button.









Buy drill into metal stud from Amazon.com


Bosch CO2159 1/2 In. x 6 In. Cobalt Drill Bit

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

Bosch cobalt drill bits are specially designed for drilling in hard steel. Thick web helix delivers fast material removal combined with increased durability for maximum efficiency and performance. Each bit is manufactured to exacting specifications and features a split point that starts on contact with no walking or skating, eliminating the need for a center punch.

Buy drill into metal stud from Amazon.com
  • Withstands high-temperature applications for extended periods of time (up to 1,100 degreeF)
  • Rigid, thick web design adds stability to bit in tough applications
  • Surface hardened to penetrate tough abrasive materials
  • Available in jobber length, full shank
  • Best used for drilling into light-gauge metal, high-carbon steel, aluminum and ally steel, cast iron, stainless steel and titanium













Buy drill into metal stud from Amazon.com


Rubbermaid Configurations Deluxe Custom Closet Organizer System Kit, 4-to-8-Foot, Titanium, FG3H8900TITNM

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

Make the most of your space with the Rubbermaid Configurations Closet Kits. Designed for better organization and maximizing space, this 4 to 8 ft. Deluxe Closet Kit includes shelves and rods that adjust for a custom fit. Get up to 22 ft. of shelving space and up to 12 ft. of hanging space when installed. Installation is simple without any cutting required so you can quickly and easily create a closet space that suits your needs. This closet set includes (7) 26-in. Shelves, (2) 48-in. Shelves, (2) 48-in. Top Rails, (19) Brackets, (5) 47.5-in. Uprights, (2) 25-in. Upright Extensions, and (2) Hang Rods.

Buy drill into metal stud from Amazon.com
  • Fits any walk-in or reach-in closet with at least one wall 4-8 ft. wide
  • Telescoping rods and expanding shelves adjust to add 22 ft. of shelving space and 12 ft. of hanging space
  • All mounting hardware included for easy installation - no cutting required
  • Closet kit includes (7) 26-in. Shelves, (2) 48-in. Shelves, (2) 48-in. Top Rails, (19) Brackets, (5) 47.5-in. Uprights, (2) 25-in. Upright Extensions, and (2) Hang Rods
  • Virtually maintenance-free epoxy finish





Buy drill into metal stud from Amazon.com


FLEXIMOUNTS 4x8 Overhead Garage Storage Rack Adjustable Ceiling Garage Rack Heavy Duty, 96" Length x 48" Width x (22''-40" Ceiling Dropdown), Black (Two-Color Options)

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

Getting sick and tired of having a garage full of clutter? The FLEXIMOUNTS 4ft-by-8ft Overhead Storage Rack is the ideal system for you to have a highly organized and clean garage. This durable and heavy duty overhead storage system has a capacity of up to 600 lbs loading. It is made of powder coated steel. The height can be adjusted from 22 to 40 inches providing a convenient and safe place to organize your stuff. This system is simple to set up and all the hardware and instructions needed are included in the package.

Features:
1. Integrated grid design: More stable and sturdy compared to others with separate frame and wire..
2. Easier DIY installation with step-by-step diagrams. Installation Template helps make plan;.
3. Top quality screw selected and All hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600lbs. The whole set is test with triple loading breaking strength.
4. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage.
5. Choose Overhead Racks with LONG ceiling brackets designed to be attached to 2 studs. Combined with SIX vertical posts, it is the optimal structure choice to ensure safety. Do not buy those with fragile structure for safety considerations.
6. Other size options available to purchase from fleximounts: 3'x8', 4'x6', 3'x6'.
7. Our racks can be installed into WOOD joists and CONCRETE ceilings (Does not fit for Metal joist)

Specs:
1. Dimensions: 96 in. L x 48 in. W x 22-40 in. H;
2. Height adjustment (ceiling dropdown): From 22 to 40 inches
3. Load capacity: Up to 600 pounds
4. Material: Powder-coated cold-rolled steel
5. Color: Black

Package Includes:
1 x Garage Rack
Hardware kit
Accessory hooks and items pictured on the racks are not included
More videos for installation on Youtube: https://www.youtube.com/watch?v=00LhPp0Z9vM

Buy drill into metal stud from Amazon.com
  • AVOID WATER DAMAGE BY STORING YOUR ITEMS OFF THE GARAGE FLOOR. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. Accessory hooks and items pictured on the racks are not included.
  • SAFE - BUY Overhead Racks with LONG ceiling brackets designed to be attached to 2 studs. Combined with SIX vertical posts, it is the optimal structure choice to ensure safety.
  • QUALITY - Top quality screw selected and All hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600lbs.
  • DIFFERENT - INTEGRATED GRID DESIGN - More stable and sturdy compared to others with separate frame and wire.
  • DIY installation with STEP-BY-STEP instruction. Installation template helps make plan (Youtube video helps installation: https://www.youtube.com/watch?v=00LhPp0Z9vM). ***Make sure to use accessories provided by Fleximounts (included in the product box), even if you choose with Amazon Installation Service. ***







Buy drill into metal stud from Amazon.com


Makita XT269M 18V LXT Lithium-Ion Brushless Cordless 2-Pc. Combo Kit (4.0Ah),

Buy drill into metal stud
Check Price on Amazon
Buy drill into metal stud from Amazon.com

Description:

Makita has the worlds largest 18V cordless tool line-up, and the 18V LXT Lithium-Ion cordless 2-piece Combo kit packs two compact cordless tools with efficient Brushless motors for a full range of drilling, driving, and fastening applications. The XT269M includes a versatile hammer driver-drill with all-metal gear construction for applications in wood, metal and masonry. The powerful impact driver weighs only 3.3 lbs. (With 4.0Ah battery), yet delivers a full 1,500 . Of torque. Both tools are equipped with an efficient and compact Brushless motor that is engineered for longer run time, increased power and speed, and longer tool life. The 18V LXT 4.0Ah battery has a category-leading charge time of only 40 minutes for less downtime and increased productivity, and includes an on-board L.E.D. Charge level indicator for increased convenience.

Buy drill into metal stud from Amazon.com
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50 longer run time per charge
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Variable 2-speed 1/2" hammer Driver-Drill (0-500 & 0-2,000 RPM) with BL Brushless motor delivers 530 . Of max torque; weighs only 4.2 lbs. With battery
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL Brushless motor delivers 1,500 . Of max torque; weighs only 3.3 lbs. With battery





Buy drill into metal stud from Amazon.com


Drill into metal stud